Technical & Reference Section > Tech and Restoration

Spindle thread sizes

(1/2) > >>

FuNMoNsTeR:
Are there only two thread sizes for old school bmx spindles? If i remember there was the standard thread and then skyway/hutch mag-ti spaced threads? Can anyone give me the TPi sizes please?  Cheers  :daumenhoch:

Frosty:
hub spindles, I was about to throw in the mix the thread sizes on the 400 series Redline cranks, but I'll just get me coat and be off....................

perry:
arnt axles 24tpi and 26tpi  :-\

FuNMoNsTeR:

--- Quote from: Frosty on May 08, 2008, 04:37 PM ---hub spindles, I was about to throw in the mix the thread sizes on the 400 series Redline cranks, but I'll just get me coat and be off....................

--- End quote ---

400 Series Flights use the same spindle as the leary turbo cranks. The square part is fatter. Didnt know the threads were different to standard flights tho.

24 and 26tpi   is that the two sizes for hub spindles?

Mattdub:

--- Quote from: FuNMoNsTeR on May 08, 2008, 07:10 PM ---
--- Quote from: Frosty on May 08, 2008, 04:37 PM ---hub spindles, I was about to throw in the mix the thread sizes on the 400 series Redline cranks, but I'll just get me coat and be off....................

--- End quote ---

400 Series Flights use the same spindle as the leary turbo cranks. The square part is fatter. Didnt know the threads were different to standard flights tho.

24 and 26tpi   is that the two sizes for hub spindles?

--- End quote ---

24 & 26tpi on 10mm I think ? .

What about 9mm ?? .

Navigation

[0] Message Index

[#] Next page