Technical & Reference Section > Tech and Restoration

Is it safe!

<< < (2/2)

Gary72:
The pitbull has an adjuster on it,planned on running the whole cable through the post and into the adjuster. Will drill approx  3/4inch above the seat clamp, in line with the split on the frame.

Similar set up, through the frame

I am going to give it a go over the weekend :uglystupid2:
This is how it was set up

You can see from the side how it sits on the clamp

kdw712:
get a posi stop - you have to bin the big black plastic bit though
which may make the lever if its not a sprung return type a bit "soggy"

bof:
No dont do it , it will not make the brake any better,  will look crap  and you cant adjust your seat :shocked:

OrgasmDonor:
just put a bit of tape over the frame where it rubs, i run quite a few pitbulls and its always tight getting the cable past the seat post or use a cable tie to keep it sitting above the seat clamp

Navigation

[0] Message Index

[*] Previous page