Technical & Reference Section > Tech and Restoration

10mm wheels into 14mm dropouts?

(1/2) > >>

scary_leary:
Whats the easiest way to put 10mm wheels into 14mm drops....please?

Sanmarcopizza:
The easiest way is to buy some top hat washers. About a fiver a pair. If you need to run pegs then you need some Primo Andy's nuts (£12 pair) in the long length, or you can use regular length to just convert from 10 to 14mm.

scary_leary:
Cheers San

see ya at bones  :santa_afro:

Dingobmxer:
or buy some of those chaintensioners that have two holes,Odyssey Pact they are called
 :) DINGO :)

HEYWOOD BMX:
 :) Most pegs are designed for 14mm axles,but come with a 10mm adaptor inside each peg.These work fine as a converter for 10mm to 14mm.

Navigation

[0] Message Index

[#] Next page