Technical & Reference Section > Tech and Restoration

Redline V bar question...

<< < (2/2)

funkyfresh:

--- Quote from: toys19 on July 19, 2008, 12:31 PM ---V interesting, that makes mine prolines! good info thanks..

--- End quote ---
Are they? I thought they were only 8" rise? If they are Prolines, then I'm still intested... :daumenhoch:
Thanks to all, BTW, interesting reading..


Bet you cant guess what they are for, Matt? ;)

Mattdub:
The Prolines got wider over the years , I've got some 28 inches wide  ;)

And in a 1984 PL20 test they list them as 27 and a quarter inches .

Not wanting to confuse anyone !  :LolLolLolLol:

Cool bars whatever size  :daumenhoch:

Martin , yes I know why you're sniffin'  ;)

gt0733:

--- Quote from: Mattdub on July 21, 2008, 08:25 PM ---The Prolines got wider over the years , I've got some 28 inches wide  ;)

And in a 1984 PL20 test they list them as 27 and a quarter inches .

Not wanting to confuse anyone !  :LolLolLolLol:

Cool bars whatever size  :daumenhoch:

Martin , yes I know why you're sniffin'  ;)

--- End quote ---


Matt, does your 28" set have "redline" etched into them on the right hand side an inch or so under the crossbar?

gt0733:
pictures speak a thousand words  ;)

first are the micros. the etching is on the L/H side just under the crossbar.






second are the prolines, later to the micros as they have a different font etched an inch or so on the R/H side under the crossbar





and last are the 28" bars but i'm not sure that they are redline as there is no etching. these may well be "procraft".

Navigation

[0] Message Index

[*] Previous page