Technical & Reference Section > Tech and Restoration

Headset Help!!!

(1/2) > >>

youngy:
Hi guys hope you can shed some light on this ::) Are there different size 1" headsets? I've got a tange headset from Alan's but when trying to fit to a Kuwahara KZ1 the head tube seems too short, 4 3/4" long. Is there a specific headset I should be using?? I thought they were all the same :D I have a head set I took off another KZ1 which appears to have a shallow top cup to fit in the frame, similar to the fork race shallow, with the screw down crown an oversized bell shape which fits over the top, this would appear that it may be ok but not sure and have already fitted the cups from the Tange set so will be a shit to remove so want to be sure . Hope you can imagine what I'm talking about here and can help me!! ;D
Thanks in advance guys :daumenhoch:

youngy:
Anybody!!!!  :(

kuwahero:
can you take some pics of what you mean. then I can advice you better

pickle:
the headset you have with the small bearing race for the top is called a Hatta, hence the shape of the large dome part that fits over the top bearings........but piccies always help

Rooonga:
How is the headset too long - do the forks not reach through it?

Maybe they have been cut down?

Let us know if this is what you mean, and pics would really help us to help you.

 :daumenhoch:

Navigation

[0] Message Index

[#] Next page