Technical & Reference Section > Tech and Restoration

Skyway pegs NITEMARE!

(1/6) > >>

Stella Dave:
Went out to garage to tighten everything up n the Ruffell Rep.

Confused! I bought both 24tpi and 26tpi for front and back.
NONE fit the front wheel and I've boogered the threads in pegs!

Are the new front tuffs 3/8"? Someone explain please!

adeshere:
Depends upon what you mean by new

I have some plastic hubbed ones pre 2000 and they are 24 front and back

I have some plastic hubs ones 2006/7 ( from america) and they are 24 rear and 26 front

I think there possibly is another version thou

Stella Dave:
Must be, their new sealed ones bought last year.

Stella Dave:
Colored tuffs site says "Standard 3/8" axles on both front and rear wheels. "
So how come the rear ones are okay?!

spesh:
i got new placky hubbed ones and the front was 26tpi and 24tpi rear cost me a fortune getting the right axle converters
but i had an old alloy hubbed front one with flats on the axle and the 26tpi converter had to be forced on about halfway down the 24tpi didnt screw on at all :wtf:

Navigation

[0] Message Index

[#] Next page