Technical & Reference Section > Tech and Restoration

Goddamn axle size for me wheel

<< < (4/7) > >>

modfather:

--- Quote from: pickle on September 19, 2008, 01:49 PM ---
--- Quote from: kdw712 on September 19, 2008, 01:36 PM ---gotta be worth taking the your local decent bike shop and having a chat
they may well have a axle that will swap over

--- End quote ---

this is a good call........they will probably charge for the wheel build but it won't be much......have to admit though that if it were me?  i'd just file a bit off of each side to make em fit........are you only cruising on the Quad or going to race?

--- End quote ---


was gonna build a daily rider to bash about in generally lol i would love to race but i live in belfast and all those races are held across the sea so too much faff for me.

i just looked at the hub i think you  would need a 10mm axle the same diameter to fit in so it wont wobble about

modfather:


Here is the picture, is that silver thing which suports the bearing what you guys call a cone!?

i was wondering if i could get a 10mm axle with the cone thingy to fit the 10mm onto the hub will it work?

MartyC:
Have a look at this page for servicing hubs...

http://www.sheldonbrown.com/cone-adjustment.html

 :daumenhoch:

Bigfrawg:

why not just machine them flat just like on the peregrine phat jack hubs 10mm/14mm axles.
i also bought some of these wheels for my mongoose but i took a grinder to the dropouts. >:D

spesh:
as i said try bigger ball bearings before you start grinding things

Navigation

[0] Message Index

[#] Next page

[*] Previous page