BMX General > BMX Chat

GT PRO PERFORMER'S

(1/3) > >>

Swivel:
Sorry to start this debate but I'm sure someone can put me straight about this soon...

The performers started with 3 holes in the forks and 3 in the rear dropouts from 84 onwards, but when did they start with 4 in the front and rear? And did they revert back to 3 at all during manufacturing?

I think Munners and Wardy have to get involved in this one  ;D

Cheers,

Matt  ;)

munners:
4 in the front and rear in 85 mate. ;)

Ive got an 84 and its got 4 in the front and 3 in the back.

Basically if you want to know if its a US one.......as long as the rear left drop has a serial then it is a US. ;)

Swivel:
Cheers Nick  ;), so there is no way an 85 or 86 model could have 3 in the front and 3 in the rear then?  ???

munners:
84's = 3 in rear and either pro forks if an early one or 4 hole drops in front

85's =3 and 4 in rear and 4 in front.

86's = 4 in rear and 4 in front.

Hope that helps. Not 100% on the 86's as they aint my bag. Positive about 84 and 85's.


HOWEVER......Wardy had an 86 with 3 hole rear. :shocked: It amazed everyone and blew everything up in the air.  Aparently these were ones that were US made tubing and later welded up in 86. I found that out from a guy in the US on ebay. I later showed Wardy what he told me and the question was at last answered! :4_17_5:

munners:
Also Matt.....i have never seen 3 hole drops in the front. ???

Navigation

[0] Message Index

[#] Next page