Technical & Reference Section > Tech and Restoration

gyro help please

(1/3) > >>

motomagII:
hi fitting an inch gyro to 1 inch threaded headset frame and there doesnt seem to be enough pull before it bottoms out .can u get spacers for headsaet to give more clearance if so where please prob need another 5mm/7mm at most though otherwise the headset lock nut wont be fully wound on .ta guys

subversion:
Which way up are you running the top plate mate? also do you have the bottom cable adjuster screws backed out enough so that the gyro sits flush on the bottom cable stop plate? :daumenhoch:

does that make any sense at all :LolLolLolLol:

moley:
Show us a piccy Gregster!!

motomagII:
YEP EVERYTHING IS THE RIGHT WAY BUT BECAUSE ITS INCH THREADED the stack height isnt high enough

moley:
Mine fitted alright!!

And with no extension to the stem!!

Is it a Gyro 1 or Gyro II or a different make?

Navigation

[0] Message Index

[#] Next page