Technical & Reference Section > Tech and Restoration

Green MX1000's

(1/2) > >>

CD17:
Got some Green MX1000's so I could stripe & polish them. But this Green paint just don't want to come off. Iv tried Nitro Mors, is there anything better ?
Some of the paint has come off, but I expected it to just peal off & leave a nice brake ready for polishing. Is this some special hard ba$tard paint on these MX1000's or what.


Chris  :(

daz bmx it!:
Hi,Chris i had the same prob mate with mine? ??? one half of the caliper was chrome when stripped (came off easy),but the other half just wouldn't come off? had to scrub it with very fine wire wool and nitro mor's, for ages then polished it up! its a pig to do but the only way i found to do the green ones.

Waxintaxin:
what colour tin is the nitromoors , you need the green one

stuntmaster:
just buy some chrome mx 1000 ;D

CD17:
Yeah thanks, I have been using the Green Nitro-mors.
I will give the wire wool a try & if that don't work, bye some chrome ones...... ;)

Thanks


Chris

Navigation

[0] Message Index

[#] Next page