Technical & Reference Section > Tech and Restoration

Crankset I'm thinking of running. Any comments or experiences?

(1/1)

mykesbykes:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=350150267097&ssPageName=MERC_VI_RCRX_Pr4_PcY_BIN_Stores_IT&refitem=120370232791&itemcount=4&refwidgetloc=active_view_item&usedrule1=CrossSell_LogicX&refwidgettype=cross_promot_widget&_trksid=p284.m184&_trkparms=algo%3DCRX%26its%3DS%252BI%252BSS%26itu%3DISS%252BUCI%252BSI%26otn%3D4



as long as its 118mm any american sealed BB should be okey?, but has anyone any suggestions as to which I should use, price is of course the driving factor here,
but I dont want to buy something that will blow up and grind bearings the day after I mount them...also are there chromoly cranks as light as aluminum? or would I
have to spend a small fortune for some tubular? Im 5'!0" and 155 pounds, and I tend to wreck aluminums, right at the bolt, I get horid squeeking sometimes, and
to end it, Ive restorted to cutting up my coke can and shaping a shim out of it by wraping it around the spindle end. works for awhile, but obiviously the problem only
gets worse. Maybe I should just stick to single pieces, as Ive rarely bent them, and they cant be that much heavier than a cheap chromoly 3pc right? well, thanks for
any ideas, m.

HEYWOOD BMX:
 :) Probably light,but a chromo 3 pc or a decent 1pc crank will be much stronger and you`ll have less chance of stripping out the pedal thread.Square taper bbs have a tendency to work loose and squeak.Also at 5"10 would think 170s maybe a bit too short?

mamadirt:
Chainring looks non-replaceable too.

Stronglight did make some decent mtb cranksets BITD though.

davevilla:
I'm not sure I go for this on a BMX - if price is the defining factor you should be able to pick up a decent used  Sugino/Tioga OPC for £20-£30 on here or on the 'bay.

magna13:
170mm you will have trouble, even with 44/16 they feel spinny as!

Navigation

[0] Message Index