Technical & Reference Section > Tech and Restoration

quick release seat clamp

(1/2) > >>

Glen:
has any one tried to use a quick release seat clamp bolt in an OS seat clamp?  Theoretically if the quick release bolt fits through the bolt hole in the clamp it should work

moley:
Tioga used to make a Quick release Clamp BITD.

They were advertised in the late 80's to 90's

moley:
http://cgi.ebay.com/NOS-80s-blue-Tioga-SC-5-QR-clamp-Old-BMX-Freestyle_W0QQitemZ270360091718QQcmdZViewItemQQptZCycling_Parts_Accessories?hash=item270360091718&_trksid=p3286.c0.m14&_trkparms=72%3A1205%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A0%7C293%3A1%7C294%3A50

moley:
I wasn't suggesting buying Lambo's!!   :LolLolLolLol:

Just that they're are proper OS alternatives if you want a QR seat clamp!!

They pop up on ebay all the time!!  :daumenhoch:

moley:
If its a similar design to the one above then it should be okay!!

Some QR skewers have a rounded edge which fit into the clamp area.   Those probably wont work as well because you wont having a rounded edge on your OS BMX Seatclamp that it will fit into.

But if you find a QR skewer that just sits on flat washers like the one below then it'll be alright.

Show us your Seat Clamp!!  :daumenhoch:

Navigation

[0] Message Index

[#] Next page