Technical & Reference Section > Tech and Restoration

removing anodised finish. - Sodium Hydroxide pellets. 'The Dogs Nuts'!

(1/1)

sid1972:
This stuff is in oven pride, but only about 6% of the 'oven pride' solution attacks the ano.

u can buy these pellets from:

http://www.reagent.co.uk/sodium-hydroxide.html

11.99 for 500g - pellets are smaller than a pea!

mix about 7 pellets in a an old cake tin and fill it up to about 3/4's with water - stripped a chainring and and brake set in under 5 mins.

it did not go black either because the process was so fast, flushed the items with loads of water, job done!

You can also re use the solution for months - BEWARE however, this does increase the mix to about a 70% solution and it will burn your skin OFF if you are not careful - best done outside for ventilation also (do not stick your head in the tin, breathing the crap in), but trust me there are worst chemicals out there!!!

Have fun!   >:D

Navigation

[0] Message Index

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod
Powered by SMFPacks Rates (Facepunch) Mod