Technical & Reference Section > Tech and Restoration

Hollowbites

(1/2) > >>

Voodoocars:
Hmmm... how do you get a pedal out of a primo hollowbite arm -left side- when the steel insert just turns >:(? I am aware the thread is reversed. New arm.....

QUADROPHENIA:


ian

speak to fuzzynod, ask him to tap a grub screw in the end of the arm into the sleeve

subversion:
Take the pedal out with the insert attached & then get it removed from the spindle. Put the insert back in with some loc-tite or similar

magna13:
I've had this problem buddy... accordingly i've ripped the threads out that the insert screws into :'( :'( Im gonna have to take it to a local engineer :(, does anyone know how to re-build threads?

Voodoocars:
If the alloy is knackered it can have a helicoil put in it. Do the inserts screw into the alloy then? Mine hasnt come out- its just turned a little in the arm. Got to ride today so i'll try and remove the pedal later.

Navigation

[0] Message Index

[#] Next page