Technical & Reference Section > Tech and Restoration
what spokes ,,help
trasher:
--- Quote from: Hunterdubber on June 15, 2009, 09:59 PM ---Well the gay pensioner mate
7 5/8's roughly equates to 194's
194's are for low/ small flange hubs on a 1.75 or 1.5 20" rim
184's for Large/ high flange hubs
both using a 3 cross pattern build :daumenhoch:
--- End quote ---
cheers dude ,,that makes sense now :daumenhoch: ,
you lot are just to rad for words :4_17_5:
--- Quote from: moanjam on June 15, 2009, 09:55 PM ---i used this to calculate for my 1 3/8's
http://www.wheelpro.co.uk/spokecalc/
:daumenhoch:
--- End quote ---
cheers dude
rhino_mac:
If you're using 194's and low flange hubs it's a four cross pattern - just built some up recently.
I bought the Asahi 194's onto Suntour low flange hubs onto Araya &x 20 x 1.75's.
stidds:
--- Quote from: the gay pensioner on June 15, 2009, 10:00 PM ---
--- Quote from: SE-Bmxer on June 15, 2009, 09:50 PM ---184mm using 3 cross lacing pattern or 194mm using a 4 cross lacing pattern, something like that
--- End quote ---
the spokes i,v just taken out are 194 ,,didn't take note of the lace pattern ,,,is the gauge right 7.5/8"
iv got another pair here that stidds built ,,,and i think there 194 ,,so i,m going to try and build them to that pattern :uglystupid2:
--- End quote ---
the gay pensioner, which wheels are the ones I built mate, as I don't lace with 194's? Measure them again from end to end and you will probably find they are 184mm with a 3x pattern (as I don't lace 4x often).
Sean
trasher:
--- Quote from: Stidds on June 16, 2009, 11:04 AM ---
--- Quote from: the gay pensioner on June 15, 2009, 10:00 PM ---
--- Quote from: SE-Bmxer on June 15, 2009, 09:50 PM ---184mm using 3 cross lacing pattern or 194mm using a 4 cross lacing pattern, something like that
--- End quote ---
the spokes i,v just taken out are 194 ,,didn't take note of the lace pattern ,,,is the gauge right 7.5/8"
iv got another pair here that stidds built ,,,and i think there 194 ,,so i,m going to try and build them to that pattern :uglystupid2:
--- End quote ---
the gay pensioner, which wheels are the ones I built mate, as I don't lace with 194's? Measure them again from end to end and you will probably find they are 184mm with a 3x pattern (as I don't lace 4x often).
Sean
--- End quote ---
hello mate ,,they where the polished ukai's with red hubbage and nipples ,,,you did for nick
i think really close to your wedding day :daumenhoch:
trasher:
these ones mate
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version