Technical & Reference Section > Tech and Restoration

1st real build - Mongrel Redline RL240

<< < (3/3)

NORTY40:
Think the colour look's good mate  :daumenhoch:  IMO there would have been too much Black on it , if the F/F had been Black too  :-\

The  met Greyish colour looks alot classier  ;)

Well done mate  :daumenhoch:

ruff n tuff:

--- Quote from: thebigdog on July 25, 2009, 10:17 PM ---
heres a pic i found in my photobucket,not a great one but gives a rough idea,is your center bearing upside down? also it looks like  yours is fixed near the lower bearing cup?
it should be loose so it can move up and down in the middle of the headset area




--- End quote ---

Well I have checked everything... the middle ring is loose but it seems like the cables from the bottom ring to the splice undeer the top tube are too long and does not allow the set-up to be tight and 'springy' - may have to go back to a straight cable and lose the gyro....

ruff n tuff:
I can admit defeat!!! the gyro had to go!  I now have a straight cable through!

Navigation

[0] Message Index

[*] Previous page