Technical & Reference Section > Tech and Restoration

Dia tech Hombre front brake

<< < (2/2)

Sanmarcopizza:
The best picture I have seen for the brake is on Danscomp.com, but unfortunately it won't let me copy the picture or link to it. That's how the brake should be set up. As Ruler says, you need to install the cable in a Potts mod style, i.e down the fork steerer tube, down the outside of the left fork (or right from front). The cable will need to be bent upwards and through the adjuster on the right side when viewed from the front or in the picture. The outer sheath ends there and the inner is taken over to the knarp which tightens the cable and sits in the circular recessin the other arm. You need to use a decent cable such as linear or at least a slic because the bend on the fork leg will make the cable tight.

aditup2004:
Thankyou very much guys, think I am getting it now.  :daumenhoch: Ad

Navigation

[0] Message Index

[*] Previous page