Technical & Reference Section > Tech and Restoration

acs z rim spoke size

<< < (3/4) > >>

bigsman:


The guy who built my wheels does it for a living so I'm 100% sure he knows what he is talking about.

He used 184s...
[/quote]

Impressive as that is I built my own with my own eyes and hands and so there was probably less chance of a communication breakdown or mistake as a result.

I used 182s for a 3 cross lace...

To be fair you could probably get away with 184s  :LolLolLolLol:

oldschoolib:
this not helping from the post ive got 194 , 184 and 182 i starated with 2 now ive got 3 come on please whats the standard anyone out there ive got 2 sets of rims and 4 sets of hubs i need these spoked

stidds:

--- Quote from: oldschoolib on October 15, 2009, 10:18 PM ---this not helping from the post ive got 194 , 184 and 182 i starated with 2 now ive got 3 come on please whats the standard anyone out there ive got 2 sets of rims and 4 sets of hubs i need these spoked

--- End quote ---

It all depends on what size the hubs are and what lacing pattern you intend to do.

If you have a set of vernier calipers and a tape measure then I can let know the measurements that are needed to be taken.  When you have the measurements I can calculate the exact spoke length needed as I did with bigsman.

Peter J:
Sorry to throw an other spanner in the works but don't you also need "washers" on the inside of the rims as well  ???

http://www.radbmx.co.uk/forum/index.php'topic=70280.0

Faze7-Ade:
I rebuilt my 36 spoke mike buff z-rims with small flange ACS hubs with 4 cross pattern using a 184mm spoke using the original long spoke nipples. I just about got away with it (the spokes were too short) but would not recommend you use this combination of spokes with 4 cross. I didn't have washers as the original wheels came without them.

So if you have acs small flange hus and want to go 3 cross then 182mm or 184mm is the length you want (there is so little difference in the length it won't really matter too much), and if you're going 4 cross 194mm is the length you want  :daumenhoch:

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod
Powered by SMFPacks Rates (Facepunch) Mod