RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: Jazzchimp on July 21, 2005, 09:22 PM
-
to wire up large flange suzy hubs to Ukais? :-\
-
and me please large flange sr hubs to araya's
please
-
Use the sheldon brown website,u need to measure your hub and rim and decide on cross pattern,3x or 4x :)
-
I normally use 186mm for 3x or 194mm for 4x. For different rims or hubs it never seems to change much a mm either way (old school parts that is).
Hope that helps
Andy
-
This is what I use,
http://www.wheelpro.co.uk/spokecalc/
Hope it helps, Ad
-
Just completed my first wheel and about to start the second now I have a complete hub built.
Anyway, the hubs are suntour high flange and araya 7x. The spokes I used were the asahi 14 x 7 7/16 and have built with a three cross pattern. The nipples I think are standard length!!!!!
Regards
Paul