RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: xmisslucyx on May 29, 2016, 05:13 PM
-
(http://uploads.tapatalk-cdn.com/20160529/ae398597f0561c6b47e28b97b9ce8dbb.jpg)
Sent from my XT1032 using Tapatalk
-
small left handed drill bit and extractor ?
I have a set from Mac Tools
John.
-
which account are we using today?
-
which account are we using today?
Sell it I would .. ::)
-
Mark out a Pentagram with your own blood, set a candle at each point, lay the frame in the middle and chant "I must not over tighten brake bolts" backwards for 666 hours, works every time :daumenhoch:
-
If the head has just sheared off and it's not bottomed out or cross threaded, there's a good chance it will just undo with a pick.
-
cut a slot in the bit of bolt sticking up , dremmel with cutting disc is best but a junior hacksaw with a fine tooth blade will do ,make sure the slot is nice and neat, get a flat blade screw diver to fit the slot , needs to fit nice n snug so shape the screwdriver with a file or the dremmel to fit , spray the bolt with WD40 and let it soak for a bit push down hard on the driver to stop it slipping and damaging the slot , turn left!!