RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: harris on July 20, 2007, 03:10 PM

Title: gyro problem on internal headset
Post by: harris on July 20, 2007, 03:10 PM

does anyone use a new school frame with internal headset and a gyro.
as mine seems to tight to go over headset.

Title: Re: gyro problem on internal headset
Post by: Trev on July 20, 2007, 03:19 PM

i think billy bmx does.

Title: Re: gyro problem on internal headset
Post by: BrianP on July 22, 2007, 01:00 AM

I do Dan,

Odyssey GTX on a wtp phoenix works fine. BUT I did have problems in the past with a snafu mobeus detangler on a fly pantera...

Bp.

Title: Re: gyro problem on internal headset
Post by: harris on July 22, 2007, 07:25 AM

i will try a gtx then as a normal steel gyro wont go over head cup,its same size .
i did file inner gyro and it just slipped over very tight.   :)

Title: Re: gyro problem on internal headset
Post by: theRuler on July 22, 2007, 10:23 AM

i use gtx's on 2 bike that have internal headsets and they are ok.

also with a gtx you cut the upper cable lengths

run a dragonfly gemini upper cable and the gyro setup will work BETTER than a straight cable