RADBMX.CO.UK

Cupid Stunt Bike of the Month/Year => Past Entries => Cupid Stunt Bike of the Month/Bike of the Year => 2009 => Topic started by: Gashead on January 02, 2010, 09:46 AM

Title: BOTY 2009 - Vote Results (Old School 20" 1980-1987)
Post by: Gashead on January 02, 2010, 09:46 AM

There are some rules that you need to follow so please have a read below before your submission, if you don't follow them your entry will get pulled 


- As many bikes as you like.

- Bike must have been built in 2009

- Full breakdown of parts used

- Four pictures only, and first picture will be used for the voting ! (so make sure it's the best one)

DO NOT PUT COMMENTS RE BIKES IN THREAD

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: pkradman on January 02, 2010, 10:40 AM

national pro (long) f&f
nat pro layback post
galindo gx bars
araya 7x /bullseye hubs
tuff neck stem
sugino/redline 400 series cranks
hutch pro beartraps
dia compe mx1000/tch 3 levers / brake set
dia compe twin bolt seat clamp
black kashi areo
mitsi comp 3  green grey logo tyres
ame cam`s



(http://www.radbmx.co.uk/archive/albums/v737/pkradman/natprolong002.jpg)
(http://www.radbmx.co.uk/archive/albums/v737/pkradman/natpro004.jpg)
(http://www.radbmx.co.uk/archive/albums/v737/pkradman/natprolong005.jpg)
(http://www.radbmx.co.uk/archive/albums/v737/pkradman/natpro003.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: pkradman on January 02, 2010, 10:42 AM

torker pro x f&f
torker pro bars
torker six bolt stem
profile gen3 cranks /spider
skyway graphites gen 2
hatta headset
suntour xc compe pedals
d/c mx 1000/tech 3 lever / brake set
d/c gold twin pinch seat clamp
ame cam`s
shot gunn 1 seat
mitsi comp 3 tyres green/grey logo





(http://www.radbmx.co.uk/archive/albums/v737/pkradman/torker002.jpg)
(http://www.radbmx.co.uk/archive/albums/v737/pkradman/torker010.jpg)
(http://www.radbmx.co.uk/archive/albums/v737/pkradman/torker013.jpg)
(http://www.radbmx.co.uk/archive/albums/v737/pkradman/torker008.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: pkradman on January 02, 2010, 10:48 AM

1980 early looptail quadangle frame /era correct cycle pro forks
1st gen star products bars (starbars)
1st gen pre pinch redline 401`s
redline flight chain gear
araya 7x / sunshine 2 tone hubs
"se" troxel seat post
kkt lighning pedals
d/c 890 /pre bent lever /brake set
kashi mx seat
oakley 2 grips
2nd gen comp 3`s  green yellow tabs
twin pinch dc seat clamp
1st gen tuf neck square edge stem








(http://www.radbmx.co.uk/archive/albums/v737/pkradman/bluequad007.jpg)
(http://www.radbmx.co.uk/archive/albums/v737/pkradman/bluequad005.jpg)
(http://www.radbmx.co.uk/archive/albums/v737/pkradman/bluequad006.jpg)
(http://www.radbmx.co.uk/archive/albums/v737/pkradman/bluequad002.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: pkradman on January 02, 2010, 10:49 AM

original finish se racing looptail pk ripper /landing gear forks
SE power wing bars
SE troxel seat post
Se camo padset
1st gen tuf neck stem
sugino 1c cranks /spider
shimano dx pedals
araya 7x /sunshine 2 tone hubs
oakley 1 grips
d/c twin pinch seat clamp
d/c 1020 /pre bent lever/ brake set
2nd gen mitsi comp 3 tyres /green yellow tab
 kashi areo





(http://www.radbmx.co.uk/archive/albums/v737/pkradman/redpk001.jpg)
(http://www.radbmx.co.uk/archive/albums/v737/pkradman/redpk006.jpg)
(http://www.radbmx.co.uk/archive/albums/v737/pkradman/redpk010.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: trasher on January 02, 2010, 05:12 PM

curtis exp
vdc monkey bars
tuff neck stem
skyway tuff 11's
redline flight crank
redline chain ring
mx 1000's
tech 3 levers
compe 3 tyres
mks bm10 pedals
izumi chain
dc mx seat clamp
gt seat post
kashi aero seat
hatta headset
(http://www.radbmx.co.uk/archive/albums/v716/glenbett/DSC02103.jpg)
(http://www.radbmx.co.uk/archive/albums/v716/glenbett/DSC02109.jpg)
(http://www.radbmx.co.uk/archive/albums/v716/glenbett/DSC02110.jpg)
(http://www.radbmx.co.uk/archive/albums/v716/glenbett/DSC02111.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: trasher on January 02, 2010, 05:18 PM

redline pl20

elina flyt tech seat
fluted seatpost
suntour arrow seat clamp
mx900 brake
tech 3 lever
ukai speedlines shine sides
suzue hubs
knarler knobby tyres
izumi chain
redline brute stem
redline v-bars
oury grips
mx 2 headset
sugino crank spider chain ring bolts and chainring
kkt pedals
(http://www.radbmx.co.uk/archive/albums/v716/glenbett/DSC02423.jpg)
(http://www.radbmx.co.uk/archive/albums/v716/glenbett/DSC02430.jpg)
(http://www.radbmx.co.uk/archive/albums/v716/glenbett/DSC02429.jpg)
(http://www.radbmx.co.uk/archive/albums/v716/glenbett/DSC02430.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: trasher on January 02, 2010, 05:24 PM

curtis pro

shimano dx seat post
kashimax mx seat
dc mx seat clamp
mx 1000 ,,,tech 3 lever
acs zrims ,suzue hubs
hatta headset
tuff neck stem
ame grips
izumi chain
sugino ct cranks ,,sugino chain ring
se powerwings ,bars
suntour xc11's pedals

(http://www.radbmx.co.uk/archive/albums/v716/glenbett/DSC02796.jpg)
(http://www.radbmx.co.uk/archive/albums/v716/glenbett/DSC02799.jpg)
(http://www.radbmx.co.uk/archive/albums/v716/glenbett/DSC02813.jpg)
(http://www.radbmx.co.uk/archive/albums/v716/glenbett/DSC02811.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: trasher on January 02, 2010, 05:32 PM

looptail ripper

elina lightening bolt seat
se seatpost
dc mx seat clamp
mx 1000 brake , tech 3 lever
ukai speedlines
unbranded chain ring
tuff neck stem
maxy cross cranks
tange lp125 headset
ame grips
se bars
compe 3 tyres
suntour xc11 pedals
izumi chain
(http://www.radbmx.co.uk/archive/albums/v716/glenbett/DSC02668.jpg)
(http://www.radbmx.co.uk/archive/albums/v716/glenbett/DSC02664.jpg)
(http://www.radbmx.co.uk/archive/albums/v716/glenbett/DSC02669.jpg)
(http://www.radbmx.co.uk/archive/albums/v716/glenbett/DSC02666.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: trasher on January 02, 2010, 05:40 PM

this one for a laugh

haro group 1 rs 2

dominator seat
gt layback
hutch seat clamp
mx 900 brake
skyway tuff 11's
gt mallet stem
gt pro performer bars
shimano sx breaklever
ame grips
sugino crank ,tuff neck  power disc ,tuff neck chain ring
compe 3 copy tyres
izumi chain
shark bite pedals
(http://www.radbmx.co.uk/archive/albums/v716/glenbett/DSC02204.jpg)
(http://www.radbmx.co.uk/archive/albums/v716/glenbett/DSC02206.jpg)
(http://www.radbmx.co.uk/archive/albums/v716/glenbett/DSC02205.jpg)
(http://www.radbmx.co.uk/archive/albums/v716/glenbett/DSC02203.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: sawzall on January 02, 2010, 05:53 PM

here are some pics of my vincent pro,i got frame about two years ago and then restored it by removing a few dents,tidying up the drop outs etc,i stripped it back to bare metal then 2k sprayed it with a custom mix orange to match the vincent freestylers,as many parts as possible are british which took me over two years to source,thanks to del for the decals, steve for the pads,and stidds for the wheel build
all british parts used are as follows
BARS-RENTHAL PETE MIDDLETON NOS :Great_Britain:
GRIPS-SHARP :Great_Britain:
PLATE -BOOGIE :Great_Britain: :Great_Britain:
FLEX FIGHTER-JAM BUTTIE  :Great_Britain:
SEAT POST-RENTHAL RESTORED  :Great_Britain:
SEAT-BROOKS RESPRAYED  :Great_Britain:
SEAT CLAMP-JAM BUTTIE RESTORED  :Great_Britain:
RIMS-SPENCER RESTORED  :Great_Britain:
CHAIN-RENOLD  :Great_Britain:
FREEWHEEL-STURMEY ARCHER  :Great_Britain:
POWER DISC-MIRAGE RESTORED  :Great_Britain:
BRAKE-LAMBERT-RESTORED  :Great_Britain:
HUBS-LAMBERT SEALED BEARING-RESTORED :Great_Britain:
BRAKE CABLE-CLARKS  :Great_Britain:
CHAINRING-AMMACO  :Great_Britain:
TYRES-20X1.75 NOS GRIPPERS
CRANKS- EARLY BOSS 180s
PEDALS-SR
(http://www.radbmx.co.uk/archive/albums/y77/sawzall717/IMG_1122.jpg)(http://www.radbmx.co.uk/archive/albums/y77/sawzall717/IMG_1147.jpg)
(http://www.radbmx.co.uk/archive/albums/y77/sawzall717/IMG_1144.jpg)


(http://www.radbmx.co.uk/archive/albums/y77/sawzall717/IMG_1146.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: Redline on January 02, 2010, 05:58 PM

1981 USA Made Redline Proline II Frame & Forks (early version with thicker bottom bracket, thicker rear dropouts and no chainstay brace)

NOS Redline Proline V Bars
NOS Redline Brute Stem
NOS Redline Pad Set
NOS Redline Fluted Seatpost
NOS Elina Seat
NOS Sugino 400 180mm Flight Cranks  with NOS Sugino Sealed BB and NOS 44t Suntour Chainwheel
NOS Suntour MP-1000 Sealed Pedals
NOS Izumi Nickel Chain
NOS Ukai Rims laced to NOS Suntour Sealed Hubs with NOS Asahi Stainless Spokes
NOS Knarler Knobby Tyres
NOS Dia-Compe MX900 Caliper with NOS DC Cable and NOS Tech 3 Lever
NOS Oakley II Grips

(http://www.radbmx.co.uk/archive/albums/m22/cheekythirtysix/Redline%20Proline%20II/19CompleteRear.jpg)
(http://www.radbmx.co.uk/archive/albums/m22/cheekythirtysix/Redline%20Proline%20II/14Sugino400.jpg)
(http://www.radbmx.co.uk/archive/albums/m22/cheekythirtysix/Redline%20Proline%20II/20CompleteSide.jpg)
(http://www.radbmx.co.uk/archive/albums/m22/cheekythirtysix/Redline%20Proline%20II/08FrameForkChromed.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: southern andy on January 02, 2010, 06:15 PM

Not something you see everyday and built by my 14yr old son.  :4_17_5:  The last photo is of how we got it.


1980 something (sorry don't know year) Halfords turbo
Iscaselle seat (original to bike)
SR cranks (original to bike)
Weinman type 1080 caliper (original to bike)
Original headset and bottom bracket.
Win bars
SR Custom pedals (original to bike)
Sakae Chainring (original to bike)
Ame grips
DC bent lever
CMC rims with comp 3 tyres
Cal lite reversible pads
Seatpost (original to bike)



(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/halfords3.jpg)


(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/halfords6.jpg)


(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/halfords5.jpg)


(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/shit1.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: stu27 on January 02, 2010, 08:00 PM

(http://www.radbmx.co.uk/archive/albums/qq344/27sam/DSCF0650.jpg)

(http://www.radbmx.co.uk/archive/albums/qq344/27sam/DSCF0651.jpg)

(http://www.radbmx.co.uk/archive/albums/qq344/27sam/DSCF0652.jpg)

(http://www.radbmx.co.uk/archive/albums/qq344/27sam/DSCF0655.jpg)

84 ta x/l
kashi aero seat
gt seat post
gt pro bars(later version)
z rims
panaracer freestyle tyres
mx 1000
tech 4 levers
dc mx seat clamp
oakley 2s
suntour power stem
tuff neck power disc
suntour chainwheel
redline twin pinch crank
shimano sx pedals

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: bobafett on January 03, 2010, 12:16 AM

1984 blue max by mongoose

mint 1984 mongoose blue max F&F wearing original chrome & original decals
mint Pro-Class bars (standard rise)
mint Pro-Class ACS stem (original finish - not polished)
very nice survivor Pro-Class wheels on SR hubs with original spokes,rim tape & decals (original finish - not polished)
NOS Knarler Knobby's
mint Dia Compe MX900 calipers
mint Dia Compe Tech 3's
NOS Dia Compe Cables & Clips
NOS genuine Skyway Tuff Pads
NOS Kashimax Aero
NOS KKT AMX
NOS Takagi Spider & chainring
NOS Izumi Chain
mint Takagi unstamped OPC (original to bike)
mint Tange stamped BB (original to bike)
mint Tange stamped Headset (original to bike)
mint Cr-Mo stamped seatpost
mint MX hinged clamp
new mongoose grips
iron cross dust caps
custom blue max padset

(http://www.jpdeane.com/bmx/mybikes/1984bluemax/bluemax37.jpg)

(http://www.jpdeane.com/bmx/mybikes/1984bluemax/bluemax39.jpg)

(http://www.jpdeane.com/bmx/mybikes/1984bluemax/bluemax35.jpg)

(http://www.jpdeane.com/bmx/mybikes/1984bluemax/bluemax06.jpg)

 :)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: bobafett on January 03, 2010, 12:17 AM

1980 mongoose

1980 nickel mongoose F&F (original nickel)
NOS 1979/80 unstamped mongoose SS bars with original decal (these had the original price sticker on before fitting)
mongoose gold stem with original decal (early model non-knurled blocks)
NOS mongoose SS seatpost with original decal (fresh out the packet)
NOS original mongoose grips (not new re-pops)
Real nice condition steel hubbed tuff II's
NOS blue/green label comp III's
NOS Kashimax MX mongoose seat
NOS KKT rat traps
Polished DC890 front DC1020 rear
NOS DC cables
NOS DC clips
NOS Skyway Tuff Pads
Nice Sugino mongoose stamped snowflake chainring
mint 165mm mongoose stamped crank
mongoose stamped BB
mongoose stamped headset
mongoose stamped seat clamp
NOS KMC chain
nice survivor genuine mongoose vinyl padset
new decals

(http://www.jpdeane.com/BMX/mybikes/1980nickelgoose/outdoor/1980nickelmongoose02.JPG)

(http://www.jpdeane.com/BMX/mybikes/1980nickelgoose/outdoor/1980nickelmongoose05.JPG)

(http://www.jpdeane.com/BMX/mybikes/1980nickelgoose/outdoor/1980nickelmongoose07.JPG)

(http://www.jpdeane.com/BMX/mybikes/1980nickelgoose/outdoor/1980nickelmongoose12.JPG)

 :)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: neiljonarcus on January 03, 2010, 07:33 AM

Mongoose "Eric Rupe" Signature Edition "tribute"


frame; mongoose  cali ;white
Grips: mongoose  Blue
Bars: mongoose pro class Chrome
Stem: pro class  ; blue 
Brakes: Dia Compe MX900, front + MX1000 rear Annodized Blue with Tech 4 Levers and blue Cables
Headset: Hatta Alloy, chrome
Seatpost Clamp: Dia Compe Hinged, chrome  copy " right  one  for  bike"
Seatpost:  Layback Smooth, Chrome
Seat: viscount  aero  Blue  mongoose  detait
Cranks: mongoose 1  peice  165mm, white & blue
spider pro class ; blue
Wheels: pro class painted 7011, white  rim tape , "manufactured by myself"
Tires: cheng shin classic  combo                                                                                                                                                                                             
Pedals: suntour x-c -11 bear trap; polished
pad set : mongoose  3 peice
chain : izumi , silver
dust caps : little  shinny  mongooses


(http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/ericblackandwhitecopy.jpg)
(http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/P1040847.jpg)

(http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/P1040827.jpg)


(http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/P1040885.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: neiljonarcus on January 03, 2010, 07:36 AM

mongoose pro class 1983   " custom "


Grips: mongoose  Black
Bars: renthal  polished ali and matt black
Stem: pro class stem polished ali and matt black
Brakes: Dia Compe MX1000, front + MX1000 rear polished aliwith Tech 4 Levers and clear dc Cables
Headset: mongoose, chrome
Seatpost Clamp: Dia Compe Hinged, polished ali 
Seatpost: renthal Layback Smooth, polished ali
Seat: viscount  aero  black  mongoose  detail
Wheels: pro class , suzie hubbs polished black rim tape
Tires: mitsi comp 3 rainbow label 2x1.75
spider; pro class power disc , polished
crank ; mongoose 165mm rechrome
                                                                                                                                                                     
Chainring: pete,s  44t polished                                                                                                                                           
Pedals: shimano sx , black
pad set : pro class 1 off special  3 peice
chain : izumi , silver
dust caps : standard black 


(http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/P1060477.jpg)

(http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/P1060493-1.jpg)

(http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/P1060494.jpg)
(http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/P1060501-1.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: neiljonarcus on January 03, 2010, 07:56 AM

VECTOR MARK 2

Grips: oury   Black
Bars: vector vc8 with warranty card 
Stem: anlun polished and black
Brakes: Dia Compe MX1000, front + MX1000 rear red  Tech 4 Levers and red dc Cables
Headset: lp 125 tange
Seatpost Clamp: suntour , polished ali  and black
Seatpost: chrome straight
Seat: black peregrine with vector decals
Wheels: pro class , suzie hubbs  black / chrome rim  tape
Tires: mitsi comp 3 yellow  label classic combo  repop
crank ; sugino gt polished  3 peice
                                                                                                                                                                     
Chainring:red sugino   44t                                                                                                                                           
Pedals: kkt  , black
pad set : vector black / red / chrome   "firebird 1 off special"
chain : izumi , silver
dust caps : standard black 


(http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/P1100752copy.jpg)
(http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/P1100769-1.jpg)


(http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/P1100841-1.jpg)

(http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/P1100760-1.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: neiljonarcus on January 03, 2010, 08:03 AM

raleigh team burner

Grips: tange   Black
Bars: chrome pro
Stem: suntour polished and black
Brakes: Dia Compe MX1000, front + MX1000 rear black Tech 4 Levers and blue and white dc Cables
Headset: lp 125 tange
Seatpost Clamp: suntour ,  black
Seatpost: chrome straight
Seat: black kashimax
Wheels: skyway tuff 2
Tires: mitsi comp 3 yellow  label classic combo  repop
crank ; sugino 175 polished  1 peice
                                                                                                                                                                     
Chainring:polished sugino   44t                                                                                                                                           
Pedals: sr custom  , black
chain : izumi , silver
dust caps : standard black 


(http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/teamburnerblackandwhitecopy.jpg)

(http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/P1070584-1.jpg)

(http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/P1070560-1.jpg)

(http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/P1070567-1.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: TC5 on January 03, 2010, 11:36 AM

Redline 102b - 1983 - Serial : 507870 Oval Stamp

Frame 102b - Original dealer Sticker - " Hank and Frank. Oakland California " V good original chrome
Forks: redline mk1 chromoly
Handlebars: Redline Long Stamp
Stem: Redline Brute Polished
Grips: Red ODI Mushrooms
Headset: Tange Connect III
Wheels: Ukai red Speedlines NOS
Hubs : Suzue High Flange red NOS
Wheel Nuts :
Tyres: Comp IIII NOS
Brakes:Dia Compe MX 1000 NOS
Levers: Dia-Compe   Tech 4 NOS
Cable: Dia-Compe red NOS
Pedals: MKS FootJaw NOS
Crank: Redline Flight D Pinch
Bottom Bracket: Flight
Chainring: Redline 37t Italic Script
Freewheel: Suntour Chrome
Chain: Izumi Red
Seat: Kashimax Aero NOS
Seat Post: Elina Layback NOS
Seat Post Clamp: SR Red
pad set : Redline
Dice Caps

(http://www.radbmx.co.uk/archive/albums/xx183/TC5_photos/102b_1.jpg)
(http://www.radbmx.co.uk/archive/albums/xx183/TC5_photos/102b_2.jpg)
(http://www.radbmx.co.uk/archive/albums/xx183/TC5_photos/102b_3.jpg)
(http://www.radbmx.co.uk/archive/albums/xx183/TC5_photos/102b_4.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: The Styler on January 03, 2010, 02:26 PM

Skyway TA '84 F+F
CW Bars
AME grips
DC 900's with Tech4 levers
Polished DK stem
Tange headset
Aero Seat
GT Seatpost
DC Hinged clamp
Sugino spider and chainring
Sugino Crank (now Redlines)
Custom M's
Skyway Mags
Chengshin Tyres

(http://www.radbmx.co.uk/archive/albums/a332/hardcor3_/SDC10996-2.jpg)

(http://www.radbmx.co.uk/archive/albums/a332/hardcor3_/SDC10994.jpg)

(http://www.radbmx.co.uk/archive/albums/a332/hardcor3_/SDC10953.jpg)

(http://www.radbmx.co.uk/archive/albums/a332/hardcor3_/SDC10996-1.jpg)

  ::)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: berndott on January 03, 2010, 02:52 PM

1986 GT Team Series f/f
Ukai Rims on SR Hubs stamped 84
GT Tyres front 2.00 and rear 1.75
DC 890 rear break and Tech 3 Lever
SR Stem, Seatclamp, Crank, Chainring and Pedals
GT Handlebar and Seatpost
GT Ariake Seat
Ame Grips
Izumi Chain
100% Survivor, just Pads are from my 85 Performer, but they fit this bike perfect.

(http://www.radbmx.co.uk/archive/albums/mm127/berndott/BMX/gt005.jpg)

(http://www.radbmx.co.uk/archive/albums/mm127/berndott/BMX/gt008.jpg)

(http://www.radbmx.co.uk/archive/albums/mm127/berndott/BMX/gt009.jpg)

(http://www.radbmx.co.uk/archive/albums/mm127/berndott/BMX/gt003.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: southern andy on January 03, 2010, 03:08 PM

1984 Kuwahara Nova Survivor


It's Kuwahara made aswell rather than a Tange one.

Parts rundown

1984 Kuwahara made Nova looptail frame and forks.
Elina flyte tech saddle.
Stamped Kuwahara Laser bars. 
Stamped Kuwahara Laser post.
Haro Tech plate.
Dia Compe 890 Rear brake.
Dia Compe tech 3 lever.
Suntour arrow seat clamp.
Araya 7x rims.
Suzue sealed hubs.
2nd Gen Mitsubishi silver star Comp 3 tyres.
suntour power stem
Takagi crank
Takagi chainring
Takagi Bottom bracket.

Kuwahara grips.

Repro pad set
NOS KKT pedals.




(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/nova3-1.jpg)


(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/nova2-1.jpg)


(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/nova1-1.jpg)


(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/kuwi5.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: southern andy on January 03, 2010, 03:18 PM

1984 SE Quadangle with Stamped Landing gears   A few changes to this for improvement.

MCS Pro race bars
Shimano DX pedals ( Refurbished)
Generation 4 Profile Cranks.
Mongoose Pro Class rims
Suzue hubs
Dia Compe MX900 Brake
Dia Compe Tech 3 lever.
A'me Rounds
Aero Brake Guard
Baby blue Ultra plate
Tioga Beartrap 2 headset
NOS Dyno stem.
Suntour Chrome Freewheel
Dia Compe Hinged Seat Clamp
Uni Pro 14 seat and post
Quadangle padset made by Firebird off of here. Black and baby blue.
SE Racing brake lever cover again made by Steve.
Stickers for bike made by our own Del.
Sugino 42 chainring aswell as a knight spider.
Cheng Shin comp 3 tyres



(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/quad3.jpg)


(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/seq3.jpg)


(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/seq1.jpg)


(http://www.radbmx.co.uk/archive/albums/p191/carpcrazyox/seq2.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: WARDY on January 04, 2010, 02:38 PM

VDC Changa long (starsky and hutch stylee  :LolLolLolLol:)


original changa long f/f and monkey bars
mint hutch pro western race stem
mint hutch doughnut seat clamp
mint kashi mx
nos oakley o wing grips
nos mx1000s brake set
mint 401s full wrap
sugino spider
gt chainring
restored dx pedals
skyways with michelin tyres
Pads done by Steve (firebird)



(http://www.radbmx.co.uk/archive/albums/ee16/lockjaw1/015-4.jpg)




(http://www.radbmx.co.uk/archive/albums/ee16/lockjaw1/013-2.jpg)






(http://www.radbmx.co.uk/archive/albums/ee16/lockjaw1/016-4.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: WARDY on January 04, 2010, 02:51 PM

82 loopy ripper


pk ripper frame with unstamped lgs
mint hatta headset
mint se power wing bars
mint suntour stem
mint oakley F1 grips
mint kashi aero
mint dc seat clamp
mint mx1000s with mint tech 2 levers
nos sugino opc
nos sugino spider
nos sugino chain ring
nos sx pedals
steel hubbed skyways with comp 3 tyres
Pads done by Steve (firebird)

(http://www.radbmx.co.uk/archive/albums/ee16/lockjaw1/007-4.jpg)




(http://www.radbmx.co.uk/archive/albums/ee16/lockjaw1/006-5.jpg)




(http://www.radbmx.co.uk/archive/albums/ee16/lockjaw1/008-4.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: neiljonarcus on January 05, 2010, 07:21 AM

 This was my 1st  harry leary turbo i built i went on to do another 2 more , but this one i spent over 4 weeks sorting the paint out   :uglystupid2:  and i feel like this is the bike that belonged to me and won  BOTM IN APRIL


  HARRY LEARY TURBO     


Frame: 4130 chromoly
Forks: 4130 chromoly (Double Butted)
Handlebars: 4130 chromoly, (custom bend)
Stem: Diamond Back (by Sugino) Alloy clamp with chromoly shaft
Grips: Oakley F-1
Headset: Tange MTX, Black Chrome
Rims: Araya 7x, Aluminium
Spokes: Asahi 36/.080 Double Butted, Chrome plated, Black alloy nipples
Hubs: Suzue sealed bearings, low flange
Tyres: COMP 3 MITSI , 2.125 front, 1.75 rear
Brakes:Dia-Compe 890, front and rear (chrome plated)
Levers: Dia-Compe Pre Bent (polished) - Later Tech III
Cable: Dia-Compe
Pedals: Diamond Back (by SR) SR-MP 133/134 (Chrome Plated)
Crank: Diamond Back Turbo, Three piece Chromoly, 181mm
Bottom Bracket: Sugino sealed bearing
Chainring: Sugino aluminium 44T (5mm width)
Spider: Sugino, alloy (integral part of crankset)
Freewheel: Suntour, 16T


(http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/2ndHLTBWcopy.jpg)

(http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/P1060011.jpg)

(http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/P1060047-1.jpg)

(http://www.radbmx.co.uk/archive/albums/ff359/neiljonarcus/P1060076-1.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: martylaa on January 05, 2010, 11:42 AM

1985 Hutch Judge
My restored 1985 Hutch Judge with Hutch parts.

Ok this is my restored 1985 Hutch Judge bike with Hutch spec on it:

USA Hutch Judge Frame and Forks
Hutch Bars
Hutch Deep H Stem
Hutch Aerospeed Cranks ( Re-pops but i'll get some originals when i can see some at a good price )
Hutch Aerospeed Disc with Sugino Chainring
Hutch Hubs
Hutch Headset
Hutch Seatpost
Hutch Seatclamp
Hutch Beartrap pedals ( NOS and from Juan's case of Beartrap Pedals )
Hutch Black Grips
Hutch Re-pop Pads
Hutch Repop Dice Kaps
Black Kashimax Aero Seat
Chrome Araya 7X's Rims
Tioga Comp III Tyres
Dia Compe MX1000 with Tech 3 lever.

(http://www.radbmx.co.uk/archive/albums/uu137/martylaa/SSL21090.jpg)
(http://www.radbmx.co.uk/archive/albums/uu137/martylaa/SSL21099.jpg)
(http://www.radbmx.co.uk/archive/albums/uu137/martylaa/SSL21097.jpg)
(http://www.radbmx.co.uk/archive/albums/uu137/martylaa/SSL21104.jpg)
p.s the Frame Pad is a bit cresed due to me hanging the bike on my wall. :daumenhoch:

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: meticulous on January 05, 2010, 01:10 PM

1984 quadangle...

maxi cross cranks
tuff neck stem
GT bars
1020 brakes
ukai' rims, shimano hubs

(http://www.radbmx.co.uk/archive/albums/ii194/quattro2008/bmxpickies728.jpg)


more pickies to follow...

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: Gashead on January 06, 2010, 11:48 AM

Custom Curtis Pro


Curtis - Frame Forks Bars and Seat Post

Tuff Neck - Stem

Comp 3 - Tyres

Araya drilled polished - rims

Kashimax - seat

DC MX1000 - Brakes

DC Hinged - seat clamp

Suntour XCII blue annod - pedals

Redline 400's

Zeronine plate, signed by Brian Curtis  :4_17_5:




(http://www.radbmx.co.uk/archive/albums/g243/gashead69/CustomCurtis002.jpg)

(http://www.radbmx.co.uk/archive/albums/g243/gashead69/CustomCurtis017.jpg)

(http://www.radbmx.co.uk/archive/albums/g243/gashead69/CustomCurtis012.jpg)

(http://www.radbmx.co.uk/archive/albums/g243/gashead69/CustomCurtis014.jpg)




 :daumenhoch:

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: Gashead on January 06, 2010, 12:03 PM

Curtis Expert - Brian Curtis Signature Model

Curtis Frame Forks and Bars

Kashi MX Seat

Annod Araya Aero's

Comp 3's

Tuf neck stem and power disc

DC MX900

Sugino Crank




(http://www.radbmx.co.uk/archive/albums/g243/gashead69/MKCurtis050.jpg)

(http://www.radbmx.co.uk/archive/albums/g243/gashead69/MKCurtis006.jpg)

(http://www.radbmx.co.uk/archive/albums/g243/gashead69/MKCurtis007.jpg)

(http://www.radbmx.co.uk/archive/albums/g243/gashead69/MKCurtis010.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: quarryman on January 07, 2010, 04:07 PM

ball burnished looptail ripper

Kashimax seat
mx seat clamp
mx 1000 brake, mx lever
Araya 7c rims
Tuff neck chain ring
Profile (2nd Gen) crank
Tuff Neck stem (Patent Pending)
tange 125LP headset
Baby blue Mushrooms
SE bars
unstamped Landing Gears (original decals)
comp 3 tyres
Bullseye pedals
Bullseye hubs
Original SE padset

(http://www.radbmx.co.uk/archive/albums/tt229/quarryman_2009/PKmain-1.jpg)
(http://www.radbmx.co.uk/archive/albums/tt229/quarryman_2009/PKSlides.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: DIRTBIKER250F on January 09, 2010, 12:39 PM

After taking advice from Mad Wardy i have to agree, it should be in here !!!

Patterson Pr200 original chrome f&f
83 Gt Pro Bars
Nos Oakley b1bs
Nos hatta chrome headset
Nos Tech 3
Hutch stem
Nos Original Patterson Pad set
Nos Original patterson seat post
Gen 1 dc clamp
Kashimax aero
mx1000
401 Full wrap crank with original 44t chainring
Ukia shiney sides with Suzie large flange hubs
Comp111 yellow label re-pops did end up with gen 2 comp 3s

(http://www.radbmx.co.uk/archive/albums/p88/dirtbiker250f/P1100200.jpg)

(http://www.radbmx.co.uk/archive/albums/p88/dirtbiker250f/100_1296.jpg)

(http://www.radbmx.co.uk/archive/albums/p88/dirtbiker250f/100_1306.jpg)

(http://www.radbmx.co.uk/archive/albums/p88/dirtbiker250f/100_1307.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: AtariAger on January 09, 2010, 06:04 PM

1985 Hutch "The Judge Series"

Part list :

- Hutch Judge F/F
- Hutch Pro Racer bars
- Hutch grips black
- Hutch Ti/Mag hubs
- Hutch donut seat clamp
- Hutch Rad Kaps
- Hutch Deep "H" stem
- Hutch 2~in~1 lock
- Hutch pad set original chrome
- Hutch Bear Trap pedals
- Hutch seat post
- Pro Class "1st" Generation crank set complete
- Pro Class power plate polished
- Takagi chain ring 43T polished
- Kashimax Aero black
- Pro Class hoops Aluminum Alloy polished
- Asahi stainless steel spoke w/black nipples
- Pro Class rim strips white/originals
- Dia-Compe 1000 brake w/white pads
- Cheng Shin tyres
- Tange 320 head set

(http://www.radbmx.co.uk/archive/albums/g139/AtariAger/033.jpg't=1263328344)

(http://www.radbmx.co.uk/archive/albums/g139/AtariAger/024.jpg't=1263328542)

(http://www.radbmx.co.uk/archive/albums/g139/AtariAger/11.jpg't=1260936213)

(http://www.radbmx.co.uk/archive/albums/g139/AtariAger/042.jpg't=1263328826)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: jimmyp on January 10, 2010, 11:50 PM

1984 MONGOOSE PRO CLASS SHOW CHROME

(http://)(http://www.radbmx.co.uk/archive/albums/g2/jimmyp12/IMG_0193.jpg)

(http://)(http://www.radbmx.co.uk/archive/albums/g2/jimmyp12/IMG_0207.jpg)

(http://)(http://www.radbmx.co.uk/archive/albums/g2/jimmyp12/IMG_0221.jpg)

(http://)(http://www.radbmx.co.uk/archive/albums/g2/jimmyp12/IMG_0232.jpg)


Frame/Fork- Mongooe Pro Class
Headset- Mongoose
Stem- Mongoose
Bars- Mongoose
Grips- Mongoose
Brake levers- Dia-Compe Tech 3
Crank Arms- Mongoose 180mm
Bottom Bracket- Mongoose
Spider: Mongoose
Chainring- Shimano
Pedals- SR
Chain- KMC
Seat- Mongoose Viscount Aero
Seatpost- Renthal
Seatpost Clamp- MX Dia Compe
Brake Calipers- Dia-Compe MX-900
Brake Cables- Dia-Compe
Hubs- Suzie Sealed
Rims- Pro Class Polished Rims
Spokes- DT stainless w/ DT black nipples
Tires- Cheng Shin 1.75
Freewheel- Shimano 16T
Pads- Mongoose

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: rooski on January 11, 2010, 10:03 PM

1983 NATIONAL PRO STANDARD
NATIONAL PRO F+F
VDC MONKEY BARS
AME UNITRONS
PRO NECK STEM
TANGE 303 HEADSET
DC MX 1000 W/DC CABLE,TECH 3
SHOTGUN SADDLE,STAINLESS POST,TUF NECK CLAMP
REDLINE FLIGHT CRANK W/REDLINE CHAINWHEEL,IZUMI CHAIN,SUNTOUR FREEWHEEL
ARAYA 1.5 RIMS W/BULLSEYE HUBS,MITSUBOSHI COMP3 TYRES
SHIMANO DX PEDALS

(http://www.radbmx.co.uk/archive/albums/pp160/andyrooski/DSC00268.jpg)
(http://www.radbmx.co.uk/archive/albums/pp160/andyrooski/DSC00261.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: xGoose on January 11, 2010, 10:07 PM

1983 Mongoose Supergoose 3

Mongoose USA Supergoose 3 F+F
Mongoose Pro Class bars
Mongoose Pro Class cranks
Mongoose Pro Class stem
Mongoose Pro Class rims on Shimano VIA hubs
Mongoose Pro Class spider
Dia-Compe NOS gold seat post clamp
Dia-Compe NOS gold MX1000 calipers
Dia-Compe NOS gold tech 2 levers
Takagi 44T chainwheel
Mitsuboshi Comp III tyres
Viscount Aero seat
Suntour XC-II pedals
Mongoose grips
Mongoose padset

(http://www.radbmx.co.uk/archive/albums/tt134/botophuket/IMG_2921.jpg)
(http://www.radbmx.co.uk/archive/albums/tt134/botophuket/P1040404.jpg)
(http://www.radbmx.co.uk/archive/albums/tt134/botophuket/IMG_2892.jpg)
(http://www.radbmx.co.uk/archive/albums/tt134/botophuket/P1040326.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: AtariAger on January 12, 2010, 08:57 PM

1984 Mongoose Pro Class : Black Chrome

Last year they made the 20" Pro Class...  :'( .

Part List :

- Mongoose Pro Class F/F (original finish & decals)
- Mongoose Pro Class bars 7 1/2" rise
- Mongoose Pro Class stem
- Mongoose Pro Class crank set complete
- Mongoose Pro Class power plate (black)
- Mongoose Pro Class Series III Hard Anodized wheel set
- Mongoose stamped stainless seat post
- Mongoose grips (black)
- Mongoose stamped head set
- Dia-Compe 1000 brake set
- Dia-Compe seat clamp
- Hutch bear trap pedals 1/2"
- Aero Team Cycle seat
- California Lite Johar pad set (black)
- Sugino 44T
- Cheng Shin fat/skinny

(http://www.radbmx.co.uk/archive/albums/g139/AtariAger/55-1.jpg't=1263329662)

(http://www.radbmx.co.uk/archive/albums/g139/AtariAger/66-1.jpg't=1263329726)

(http://www.radbmx.co.uk/archive/albums/g139/AtariAger/11-2.jpg't=1263329741)

(http://www.radbmx.co.uk/archive/albums/g139/AtariAger/44-1.jpg't=1263329769)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: tweeker on January 16, 2010, 11:36 AM

JMC - Darryl Young '84

Frame - JMC 'darryl young' re-sprayd - og decals
Fork - JMC 'darryl young' og chrome
Bar - JMC - 'darryl young' pro bar - og chrome with og decals
Wheels - Weinnman nos
Hubs - Campagnolo
Tires - Competition III Rainbow - front 2.125 - back - 1.75
Grips - Oakley B2's
Stem - DK pro nos
Headset - Tange 125 lp nos og
Padset - JMC og
Cranks - Redline single pinch - og decals
Chainring - Redline bubble font - 45 th - nos
Pedals - Hutch og
Post - GT
Seat - Kashimax Aero
Chain - Izumi
Brake - Dia Compe MX 1000 og decal
Brakepads - Skyway Tuff pro pads
Lever - Dia Compe Tech III



(http://www.radbmx.co.uk/archive/albums/ff231/SergeMannee/JMC%20darryl%20young/DSC03075.jpg)


(http://www.radbmx.co.uk/archive/albums/ff231/SergeMannee/JMC%20darryl%20young/DSC03082.jpg)


(http://www.radbmx.co.uk/archive/albums/ff231/SergeMannee/JMC%20darryl%20young/DSC03081.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: dinglem on January 16, 2010, 11:40 AM

1983 Skyway TA 'Mr.Freeze' very early serial number USA 2-83 0000003

Skyway TA USA 0000003 frame and forks
NOS Skyway Race bars
Skyway padset with 'California Lite' straight bar pad
NOS Blue/white Oakley B-1B grips
Redline Flight Cranks - freshly rechromed
Redline chainring - polished
NOS Titron BearTrap pedals in blue with ultra rare titanium spindles (one of 20 pairs made)
Izumi half-blue chain
NOS chromed UKAI rims
NOS Blue/Red Bullseye hubs
Blue/chrome/polished Pro Neck headset clamp
NOS Tange headset
NOS blue MX1000 brakes
NOS GT layback seatpost
NOS Hutch seatpost clamp (chromed)
NOS Viscount Dominator Pro seat
NOS 1.5 Mitsubishi Comp III

(http://www.radbmx.co.uk/archive/albums/ac356/dinglem/DSC03607a.jpg)
(http://www.radbmx.co.uk/archive/albums/ac356/dinglem/DSC03604a.jpg)
(http://www.radbmx.co.uk/archive/albums/ac356/dinglem/DSC03616a.jpg)
(http://www.radbmx.co.uk/archive/albums/ac356/dinglem/DSC03626a.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: cuckoo on January 16, 2010, 01:34 PM

1984 skyway TA

84 ta frame
25th anni ta forks
nos tange grips
nos tange 303 headset
nos tange headlok
tange seat clamp
nos win v bar
nos tech 2 levers/890 calipers
nos nitto mx2 stem
nos shimano high flange hubs
araya aero powdered white
nos kuwahara irc racer 80x fat/skinny
sugino 400 crank
nos sugino chainring
nos izumi chain
nos kkt pedals
nos shimano seat post
nos kashimax seat
nos bar & stem pad
skyway frame pad

(http://www.radbmx.co.uk/archive/albums/a375/konyl7/bmx/IMG_9385.jpg)

(http://www.radbmx.co.uk/archive/albums/a375/konyl7/bmx/IMG_9396.jpg)

(http://www.radbmx.co.uk/archive/albums/a375/konyl7/bmx/IMG_9356.jpg)

(http://www.radbmx.co.uk/archive/albums/a375/konyl7/bmx/IMG_9358.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: berndott on January 16, 2010, 03:01 PM

one more Skyway  :smitten:

Frame and Fork Skyway T/A 2-83 No.248
Wheels Skyway Tuff (new version)
Tyres Comp 3 20x1.75
Break Dia ComeMX 1000 with Tech 3 Lever
Seatclamp Dia Compe MX
Seatpost Odyssey (with Tuf Neck sticker)
Seat Kashimax Aero
Stem Tuf Neck
Handlebar GT 10" Pro (Andy Patterson)
Grips Ame Round
Pads Skyway Cal. Lite (repros)
Crank Redline 401 Flights 175mm
Chainwheel Redline 43T
Bottom Bracket Tange Beartrap
Headset Tange 320 Beartrap
Pedals Suntour XC II
Chain Izumi

(http://www.radbmx.co.uk/archive/albums/mm127/berndott/BMX/SL370530.jpg)

(http://www.radbmx.co.uk/archive/albums/mm127/berndott/BMX/SL370522.jpg)

(http://www.radbmx.co.uk/archive/albums/mm127/berndott/BMX/SL370524.jpg)

(http://www.radbmx.co.uk/archive/albums/mm127/berndott/BMX/SL370526.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: tribal jedi on January 16, 2010, 05:31 PM

PK RIPPER 1986
stripped of paint and highly polished
landing gear forks
ukai chrome rims /nos
shimano dx hubs /nos
chrome spokes /nos
pro class bars
ame grips /nos
shark bite pedals /nos
kenda tyres /nos
shimano mx brake /nos
shimano sx lever /nos
sungino gt crank
cougar seat/post /nos
shimano stem /nos

(http://www.radbmx.co.uk/archive/albums/u91/tribal-jedi/IMAG4284.jpg)

(http://www.radbmx.co.uk/archive/albums/u91/tribal-jedi/IMAG01841.jpg)

(http://www.radbmx.co.uk/archive/albums/u91/tribal-jedi/IMAG4278.jpg)

(http://www.radbmx.co.uk/archive/albums/u91/tribal-jedi/IMAG4283.jpg)

Title: Re: BOTY - Old School BMX 20" - 1980 - 1987
Post by: Spen69 on January 17, 2010, 08:47 AM

1983 Pro-Class
Not sure it's worth endering after seeing Atari's above, but here's my Custom Pro-Class :smitten:

1982/3 Frameset from the other side of the pond, with a 125 headset and a new paintjob by Mark at Imprezivfinishes :daumenhoch:
Questionable forks - lighter than Cali ones, but let the arguments start :knuppel2: :2funny:
Pro-class wheels with 2-pack paint and sealed Suzue's with NOS Compe3 rainbows
NOS Proclass bars, repop grips and survivor Suntour stem
NOS padset
NOS MX thou's and Tech4's (can't find a set of NOS Tech3's!)
GT layback and Kashi
Single-pinch Flights and NOS MKS202's, NOS ring and chain with a touch of Del's magic :daumenhoch:

Finished :smitten:
(http://www.radbmx.co.uk/archive/albums/aa149/Spen69/IMG_1279.jpg)

Not quite finished....
(http://www.radbmx.co.uk/archive/albums/aa149/Spen69/IMG_1114.jpg)
(http://www.radbmx.co.uk/archive/albums/aa149/Spen69/IMG_1115.jpg)
(http://www.radbmx.co.uk/archive/albums/aa149/Spen69/IMG_1117.jpg)