RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: winnit93 on January 30, 2010, 10:15 PM
-
ive aquired these lovely little steel hubbed mark 1 tuff 2's but as ive never had tuffs this old im not sure which freewheel and clip i need
(http://www.radbmx.co.uk/archive/albums/v665/winnit93/tuffs012.jpg)
ginny has quite a few but thought id ask here
also front has had the studs modified but is there a better kit or someone on here that could do a better job
(http://www.radbmx.co.uk/archive/albums/v665/winnit93/tuffs015.jpg)
(http://www.radbmx.co.uk/archive/albums/v665/winnit93/tuffs016.jpg)
thanks in advance!
-
You will need a 16 tooth cog , they are the same as the ones found on the old sturmly archer three speed hubs , you will also need the locking ring to hold it on . If you have trouble finding them at your LBS drop me a mail as my LBS has them in stock . The screw bolty type things in the front wheel are skyway hub repair originals if i am not mistaken , hope this helps . :)
-
You will need a 16 tooth cog , they are the same as the ones found on the old sturmly archer three speed hubs , you will also need the locking ring to hold it on . If you have trouble finding them at your LBS drop me a mail as my LBS has them in stock . The screw bolty type things in the front wheel are skyway hub repair originals if i am not mistaken , hope this helps . :)
Not the same as a Sturmey Archer I'm afraid they are only a three spline sprokect, that is an early cassette hub with considerably more splines. You'll also need a lock ring for it too. I think it's the Suntour type like this:
(http://rinienterprises.com/images/sk-7-16sun.jpg)
But I think unless someone else has one of this type it's going to be a bit hit and miss to find what you need.
The Front hub is a replacement Skyway og kit, you could replace the nut and bolts with domed ones from b&q or somewhere but then it won't be og anymore ;)
-
I think BrianP on here may have a spare? give him a pm he helped me out :daumenhoch:
-
the spring clip is a right fooker to find scoot, it might be worth spen getting you one and trying it, cos if he has a lead on em it will help alot of people out
-
i am going into the shed today i am sure i have one on a old hub if so its yours
-
scott you are in luck mate both ring and clip i will send it over just payme the postage :)
(http://www.radbmx.co.uk/archive/albums/ac262/n2cus/P1110661.jpg)
postage £ 79.63
:LolLolLolLol: :LolLolLolLol: :LolLolLolLol: only kiddin you know the cracke mate
-
postage £ 79.63
:LolLolLolLol: good on ya Neil :daumenhoch:
-
That Geordie fooka charged my 82.47 last time he posted sommat to me....... :LolLolLolLol:
Morning fellas - I'm guessing my brother logged on as me last night the numpty or I was more drunk than I remember as I know fook all about these sprockets but he does :crazy2:
Spen
-
That Geordie fooka charged my 82.47 last time he posted sommat to me....... :LolLolLolLol:
Morning fellas - I'm guessing my brother logged on as me last night the numpty or I was more drunk than I remember as I know fook all about these sprockets but he does :crazy2:
Spen
Who are you? Shaggy? It wasn't me.... :LolLolLolLol:
Think the post worked a treat though and but the looks of it scotty has the right sprocket :daumenhoch: