RADBMX.CO.UK

Old School BMX 1980 - 1988 => Old School Race (riders ready, pedals ready... GO!!) => Topic started by: AGUILAR3 on February 16, 2010, 04:37 PM

Title: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: AGUILAR3 on February 16, 2010, 04:37 PM

Hello everyone. My name is Hector Aguilar and just now checking in. Ive been a member since 07 and have been a lurker ever since.

Here is a little something about me for those that are interested.  http://bmxsociety.com/topic/46320-bmx-society-collector-spotlight-vol-1/



A good buddy of mine (Norm from Aus.) sent me a RADBMX link asking about the Hutch Aluminum frame sets and in that thread, a picture of my frame set was posted. To clear up some confusion,  I will start a new topic here for anyone who is interested.

Thanks in advance for looking


May 8. 2009
.
.
.
.

LET THE ALUMINUM REVOLUTION BEGIN

Quote

"It's going to revolutionize the sport." Says Rich "Hutch" Hutchins. What? you ask. Aluminum frames and forks. Hutch Hi-Performance Products is getting ready to introduce a lightweight pro frame-fork set which will lighten a pro BMX race bike by almost two pounds. Rich Moliterno is currently testing an aluminium pro frame that weighs two pounds, three ounces, and an aluminium fork weighing 17 ounces. By comparison, a standart chromoly  Hutch Pro frame weighs three pounds, eight ounces, while the matching fork weighs one pound, ten ounces.

If the new aluminium frame-and-fork prototypes test okay, their combined weight of three pounds, four ounces will be a full one pound,14 ounces lighter than the current chromoly versions. The new technology will not come cheap. Hutch will probably put a retail price of over $250 on the frame and fork alone. Aluminum is not new to the BMX industry. SE Racing aluminium P.K. Rippers have been around for years. What is new, according to Hutch, is the type of aluminium used in the frames,and the procces of heat treated them. The new Hutch framesets will use what is known as an "atmospheric-free heat-treating procces" which is used in the space industry, takes 14 hours to complete and costs $24 per bike. The procces supposedly eliminates the problem of metal fatique that plaqued aluminium bikes of old. The new technology is already used in the production of Hutch's new $250 Junior and Mini framesets

(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/HutchAdAluOct86.jpg)


Welding of the frame sets

Quote

"The way that most aluminum frames are welded right now is not as clean looking as what we're doing. To perfect these welds on the Junior, we hooked up with someone who was into Cannondale's type of welding. The way that the Cannondales are welded and the way that we're doing it is THE prpper way of welding aluminum. It's actually fusing the aluminum instead of welding it."
"Our aluminum frames are first welded with a rod, and then fused. The welds aren't sanded. Also, the stress points have been moved from the front of the frame to the bottom bracket.
There's no stress on the front end at all."

(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/LittleRocket.jpg)

Some interesting words concerning the aluminum framesets

Quote

The final nail in the coffin came when Hutch designed a new aluminum racing frame. It was extremely light. (The frame weighed 1lb 9 oz.) However it didn't hold up well. A kid was seriously hurt on one when the frame broke. Hutch was sued. The frame was recalled. The company was handed over to the investor, a man named Richard Bellis. I assume he was also referred to as Bill Bellis since I've heard many people call him that as well.
(from: history of Hutch,www.hutch-bikes.com

(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/c.jpg)
(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/a.jpg)
Interview with Haney on the demise of Hutch as a Company

Quote

Although they didn't make many Hutch did make a few. They had just started to market them and a young kid was hurt badly on one. The frame broke for no reason and to my knowledge amazingly Hutch did not have any liability insurance. They were sued for quite a sum and for a company that was already in the red this just simply put them over. All of the aluminum Hutch bikes were then recalled and destroyed. They were only produced for around 4 months and were absolutely beautiful!

(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/b.jpg)
(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/d.jpg)

Thanks to Juan Matos, I'm the prowd owner of quite possible one of the rarest frame sets ever.


(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/HutchLawsuit001.jpg)
(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/HutchLawsuit004.jpg)
(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/pix001.jpg)
(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/pix002.jpg)
(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/pix003.jpg)
(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/pix005.jpg)
(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/pix007.jpg)
(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/pix008.jpg)
(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/pix009.jpg)
(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/pix010.jpg)






Quotes  and scans borrowed from JJR BMX http://users.telenet.be/jjrbmx/inter-test/HUTCHAluJrTest86.html.. :D






May 18, 2009
.
.
.
.
.


I had a tingle in my nether region when this came in today...:D

rare NOS Hutch light alloy mini bars and even more elusive Hutch H mini stem

(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/HutchJR001.jpg)
(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/HutchJR002.jpg)
(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/HutchJR003.jpg)





May 28. 2009
.
.
.
.




1 /38" hoops came in this week. Now if I could only find a set of NOS Hutch Mag/Ti hubs...:(


(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/HutchJr002-1.jpg)


Grips, Cranks and seat are next.





May 29, 2009
.
.
.
.


How cool is this?

Quote

The Hutch mini stems come in three sizes--a 1 inch reach, a 1 1/2 inch reach, and this one here--the 2 inch reach. Also shown is the magnesium headset, which has a teflon ring instead of ball bearings. Not quite the smoothest thing we've ever used.

(http://users.telenet.be/jjrbmx/inter-test/HutchAluHead.jpg)




a Hutch Magnesium ultralite mini headset


(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/MagnesiumminiHeadset003.jpg)





Dec 3, 2009
.
.
.
.



After 7 long months of hard searching, I finaly found a set of hubs worthy of this build.




NOS Hutch Mag/Ti hubs


(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/jMagTiSmall.jpg)

(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/NOSHutchMagTihubs002.jpg)




Cranks, Grips, seat and brakes are sure to follow. Any suggestions?



Thats where the project stands. I'm either thinking about Black Hutch grips or black Oakley O wings with Jumbo donuts. I havent decided on cranks yet even though Aerospeeds are the obviouse but I'm not sure if the spindle will work on my BB. 

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: Mattdub on February 16, 2010, 04:56 PM

Hector ,

Thanks for posting , that is gonna be off the scale !  :shocked:

Matt

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: harris on February 16, 2010, 05:00 PM

fantastic post and well documented..one rare hen.

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: QUADROPHENIA on February 16, 2010, 05:00 PM

hector i see that on os-bmx before christmas, one pukka bike, since they changed the lay out on os i havent been on tbh, i find it hardwork. keep us updated on the build  :daumenhoch:

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: monkian on February 16, 2010, 05:16 PM

Great stuff man. Look forward to the updates :daumenhoch:
Thanks for sharring.

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: Bigplinky on February 16, 2010, 05:39 PM

Fan-fookin-tastic Hector, all that stuff is great  :daumenhoch:

A lot of mini's in the UK used TA cranks which look good with the correct chainring.

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: OrgasmDonor on February 16, 2010, 05:55 PM

those hubs are a bit sexy :daumenhoch:

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: stuntmaster on February 16, 2010, 06:03 PM

sweet stuff

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: HUTCHMAN on February 16, 2010, 06:26 PM

that ali junior is georgous , have to sell the wife and kids to afford one of those(thats the easy part,finding one,that's the hard bit)

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: scary_leary on February 16, 2010, 06:56 PM

 :shocked: Holy fack.. thats up to the back wheels that one.

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: dan-dare on February 16, 2010, 07:10 PM

Good stuff. :daumenhoch: :daumenhoch: :daumenhoch:

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: ron burgundy on February 16, 2010, 07:38 PM

 :shocked: now that is cool...

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: diesel on February 17, 2010, 01:44 PM

Cool - Great Stuff  :daumenhoch:

I didn't know that Hutch were already in the Red when it happen, I always presumed it they went from riches to rags in a flash.

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: MartyC on February 17, 2010, 02:49 PM

Great background and history; that is going to be one expensive but beautiful bike  :4_17_5:

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: AGUILAR3 on February 18, 2010, 05:43 AM

Thanks for the compliments guys. It sure has been a interesting project thus far.

BTW, do you guys think Aerospeeds would be overkill on a jr?

Thanks again guys

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: stidds on February 18, 2010, 09:21 AM

That is a wicked looking project Hector, I can't wait to see it finished.

Personally I think Aerospeeds would look out of place on a jr, a nice set of alloy race cranks would be just the ticket to keep the weight down.

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: Mattdub on February 18, 2010, 09:48 AM

Quote from: Stidds on February 18, 2010, 09:21 AM

That is a wicked looking project Hector, I can't wait to see it finished.

Personally I think Aerospeeds would look out of place on a jr, a nice set of alloy race cranks would be just the ticket to keep the weight down.

I'd go campagnolo , suntour superbe , TA or similar Hector  ;)

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: jimmyp on February 18, 2010, 01:43 PM

That looks lush, :smitten: keep the pics coming   :daumenhoch:

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: Bob_Acid on February 18, 2010, 02:58 PM

Quote from: Mattdub on February 18, 2010, 09:48 AM

Quote from: Stidds on February 18, 2010, 09:21 AM

That is a wicked looking project Hector, I can't wait to see it finished.

Personally I think Aerospeeds would look out of place on a jr, a nice set of alloy race cranks would be just the ticket to keep the weight down.

I'd go campagnolo , suntour superbe , TA or similar Hector  ;)

What he said  :daumenhoch:

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: AGUILAR3 on February 18, 2010, 04:42 PM

Well, I do love Campagnolo... but I have used them on maybe 7 of my builds already. I was thinking of maybe some gold Avocet cranks.

This Ad shows what look like Avocets or Shimano 600s?

(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/avocet.jpg)



Here are  2 with Campy cranks.


(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Blazer%20mini%202/Blazerminipt4012.jpg)

 (http://www.radbmx.co.uk/archive/albums/r46/AGGY3/82%20Chro-mo%20Quadangle/PowerwingBars003.jpg)

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: Mattdub on February 18, 2010, 05:06 PM

Quote from: AGUILAR3 on February 18, 2010, 04:42 PM

Well, I do love Campagnolo... but I have used them on maybe 7 of my builds already. I was thinking of maybe some gold Avocet cranks.

This Ad shows what look like Avocets or Shimano 600s?

(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/avocet.jpg)



Here are  2 with Campy cranks.


(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Blazer%20mini%202/Blazerminipt4012.jpg)

 (http://www.radbmx.co.uk/archive/albums/r46/AGGY3/82%20Chro-mo%20Quadangle/PowerwingBars003.jpg)

I remember quite a bit of campy on your builds over on OS Hector  ;) .

Shimano 600's are nice , got any better pictures of Avocet ? .

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: AGUILAR3 on February 18, 2010, 05:44 PM

Yeah, Campy is good....but sometimes its just too much. Im about to redo the Quad and will be listing the Blue Campy cranks, ring, pedals and maybe the Campy wheel set. Maybe go with a more traditional era correct build.



Avocets are like Campy cranks (Italian Road/Track cranks) with a longer 144 bcd. I love the single ring look like on my mini BLAZER.

(http://images.andale.com/f2/115/106/3561856/2007/11/6/avocet_cranks2.jpg)

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: HUTCHMAN on February 18, 2010, 05:58 PM

or how about some 1st gen bullseye cranks?

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: bobafett on February 19, 2010, 04:06 PM

Very cool project Hector  8)

Good to see you on RAD too :daumenhoch:

Hector - is a top man - sent me a full bike last year with the most professional packing I have ever seen and really helped me out with the shipping  ;)

 :4_17_5:

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: AGUILAR3 on February 19, 2010, 08:57 PM

Quote from: HUTCHMAN on February 18, 2010, 05:58 PM

or how about some 1st gen bullseye cranks?

you know what, instead of trying to be all exotic and such, I may have to go with a set of Gold NOS 165mm maxy Cross cranks.

Sometimes, you just have to "keep it real and stay simple"


and John, Gracias for the kind words

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: HUTCHMAN on February 19, 2010, 09:09 PM

I'm hopefully going to pick up a tatty chrome expert soon,looking to do it in the same colour way as the Heather O'Rourke black Hutch bike,looking to put gold Maxi Cross on that(although the original did'nt have em). The Bullseye's were only a passing thought,fair comment!  :daumenhoch:

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: Dingobmxer on February 19, 2010, 09:14 PM

Thats gonna be a beautiful build Hector  :4_17_5:

Dingo

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: AGUILAR3 on February 22, 2010, 11:54 PM

Quote from: HUTCHMAN on February 19, 2010, 09:09 PM

looking to do it in the same colour way as the Heather O'Rourke black Hutch bike

Black and Gold? you cant beat that color combo.

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: AGUILAR3 on February 23, 2010, 12:11 AM

Here are the pedals I'll be using.

Hutch mini bear traps with titanium axles and Urchin cages. I dont like the Urchins but I feel they are era correct for the Lawsuit and the black cages  just looks good.


(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/lawsuit.jpg)

(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/misc008.jpg)
(http://www.radbmx.co.uk/archive/albums/r46/AGGY3/Hutch%20JR%20Aluminum%20Lawsuit/misc007.jpg)

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: AGUILAR3 on February 24, 2010, 05:27 PM

List of needed items.

Grips: Black Oakley O wings w/ Jumbo donuts, Hutch (overkill ?)

Cranks: Avocet 144 bdc's or tried and true Gold 165 Maxys

Tires (?) IRCs, Panaracers

Brakes: 900s w/tech 4 (?)

I have to remember that this is a mid 80s frame set.

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: HUTCHMAN on March 07, 2010, 06:07 PM

Any updates Hector?

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: Flemdog on March 20, 2010, 09:03 AM

Unreal thread, what a bike...!  :4_17_5:

I loved my White Hutch hubs until I stripped the rear axle one day ( :'( )and eventually snapped my pedals ( 2 sets, boo!)

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: HUTCHMAN on March 21, 2010, 12:08 AM

but the main thing is...have you still got the hubs?

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: AGUILAR3 on April 01, 2010, 07:55 AM

Quote from: HUTCHMAN on March 07, 2010, 06:07 PM

Any updates Hector?

Well, I finally found some tires I like. 1 3/8 IRC Z II's. I also picked up a UNI mini pro seat

I'm also in the process of obtaining some super rare Profile 3rd gen 170 mm cranks. Perfect for this build.

All that is left is to find a set of rear black or gold  DC 901s w/ dated cable and a Tech 4 lever

I need to hurry though, 2 more months for the OS-BMX Legends show in June

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: martylaa on April 01, 2010, 08:10 AM

really looking forward to seeing this one hector, by the way nice nos vdc cruiser ya posted on bmxmuseum
you must be made of money :LolLolLolLol:

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: gossa on April 01, 2010, 08:33 AM

Quote from: AGUILAR3 on April 01, 2010, 07:55 AM

Quote from: HUTCHMAN on March 07, 2010, 06:07 PM

Any updates Hector?

Well, I finally found some tires I like. 1 3/8 IRC Z II's. I also picked up a UNI mini pro seat

I'm also in the process of obtaining some super rare Profile 3rd gen 170 mm cranks. Perfect for this build.

All that is left is to find a set of rear black or gold  DC 901s w/ dated cable and a Tech 4 lever

I need to hurry though, 2 more months for the OS-BMX Legends show in June

Hector, will 901's be too deep for the 1"3/8's? You might need an old road caliper or maybe a 890 with the slots drilled up a bit? maybe even drill the caliper body with small holes like they did BITD?  And as for cranks, is that a specific bb in there or is it a threaded shell that will take any euro crank?

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: AGUILAR3 on April 01, 2010, 09:00 AM

Well, the 901s seem to be a hair shorter then the rest at 66mm compared to 73mm+ minimum.  If it doesn't fit, I can try a shorter mx 750. 890s are actually longer with a 68mm min reach


The shells are pressed in and take a smaller standard square taper spindle. After removing the bearings from the frame set, I realized that if I remove the spacer, I could fit a profile splined spindle with either spacers or collars on each side.

I test fit my 2nd gen box crank spindle and all was good.

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: martylaa on April 01, 2010, 09:22 AM

did you ever find those black o wing s then?

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: AGUILAR3 on April 01, 2010, 03:19 PM

Crap...I forgot about needing grips  :tickedoff:

Still need O-wings or Hutch grips

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: AGUILAR3 on April 07, 2010, 08:54 PM

what about NOS Profile 170mm 3rd gens?

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: HUTCHMAN on April 07, 2010, 08:56 PM

aluminium?

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: AGUILAR3 on April 07, 2010, 09:45 PM

good call...No, they are not.


I need to stick with aluminum right....argh

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: HUTCHMAN on April 07, 2010, 10:11 PM

love those Profile ali cranks... a woodruff key for locating the crank on the spindle.

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: AGUILAR3 on April 07, 2010, 10:57 PM

and since there are only 2 known to exist, that makes obtaining them a bit difficult  ;D

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: HUTCHMAN on April 07, 2010, 11:14 PM

ooh! learn somat every day.....fair comment. but looks wise,would have killed.

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: PK6061 on April 25, 2010, 09:34 AM

keep up the good work hector :4_17_5:

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: jT Racing on April 27, 2010, 04:28 PM

i love 600's, they look nicer than a lot of cranks from the road bikes. they did some nice colours for bmx too. I got a NOS set on my 82 laserlite and they just look like they are built for speed.

that build is gonna be very very nice. Anybody know who the family is that finished off hutch? :knuppel2:

are you nearly finished? looking forward to seeing it done.

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: steve on May 25, 2010, 12:16 AM

when were the frames made - late eighties?

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: trickydeno on May 26, 2010, 07:33 PM

thats a beaut!!!!!

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: QUADROPHENIA on May 30, 2010, 08:03 AM

hector forget all that hutch tat and get the pics up of the GT

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: AGUILAR3 on September 27, 2010, 12:00 AM

Due to some unfortunate circumstances and total lack of interest, I may have to sell off the project as a whole. (less brakes,cranks and grips). I never thught it would come to this but life leaves me no choice  :(

TWOBBBOYZ@AOL.COM

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: bobafett on September 27, 2010, 12:05 AM

That's a shame Hector  :(

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: HUTCHMAN on February 24, 2011, 09:04 PM

how spooky,i searched this thread out,about an hour ago...after all this time!  plus it's a shame Hector hasn't been on here for something like for months.

Title: Re: Let THE Aluminum Revolution Begin...The HUTCH Aluminum JR "Lawsuit"
Post by: Coastvl on April 07, 2011, 12:31 PM

Never mind, Norm will sort them out in time....Cool frames too.  :daumenhoch:
(http://www.radbmx.co.uk/archive/albums/m61/mickjess05/hutch%20mini%20lawsuit/lawsuits004.jpg)