RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: brummie on February 17, 2010, 02:49 PM
-
hello, have had this problem with loads of bikes and i just usually swap posts around until one fits.
any tips for these as surely they are all the same old school size? skyways, gt's and diamond backs
should i grease the post before i slide it in? :D
any tips on cleaning inside the seatpost downtube? as perhaps bit grubby and rusty down there
advice gratefully appreciated :daumenhoch: :daumenhoch:
-
hello , I aint 40 :knuppel2:
-
thanks me OLD mucka, knew i could rely on you pal :daumenhoch: :-*
-
clamp could have been overtightened and pushed the top together a bit , just persist ya poof it ll go :LolLolLolLol:
-
bit of grease do ya reckon? or no :-\
-
clamp could have been overtightened and pushed the top together a bit , just persist ya poof it ll go :LolLolLolLol:
or maybe a drop of WarDys 40 or wd40 for short
-
clamp could have been overtightened and pushed the top together a bit , just persist ya poof it ll go :LolLolLolLol:
or maybe a drop of WarDys 40 or wd40 for short
:LolLolLolLol: its the wd38 ya want dave :LolLolLolLol: try a bitta grease , some are tight need to keep turning the fooker :daumenhoch:
-
clamp could have been overtightened and pushed the top together a bit , just persist ya poof it ll go :LolLolLolLol:
or maybe a drop of WarDys 40 or wd40 for short
:LolLolLolLol: its the wd38 ya want dave :LolLolLolLol: try a bitta grease , some are tight need to keep turning the fooker :daumenhoch:
cheers carl :daumenhoch: :daumenhoch:
-
What's with all the "happy 40th" banners on ya bay window ?
-
cheers guys, will clean inside the seatpost downtube and use a little grease. should go in then
thanks
-
anything is possible with the correct amount and application of lubricant :shocked: :-*