RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: magna13 on March 27, 2010, 12:16 PM
-
my S&M Dirtbike arrived yesterday, wanted to begin stripping it as i want it re-sprayed. went to take the Odysses Posi Clamp off that came with it but the bolt is completley rounded! :'( how will i be able to get this off? HELP
Thanks Zak ;)
-
Zack get a small hacksaw and cut through the bolt in the gap in the clamp :daumenhoch:
WOODY :4_17_5:
-
vice grips?
-
gave a little go with vice grips, to tight and wont budge!, might use a juniour hacksaw aswell Darren :daumenhoch:
-
you can always use a hacksaw to cut a slot in the bolt, and then use a screw driver to undo it.
-
thank you bobbysam, going to try that me thinks :daumenhoch:
-
Is it an allen key bolt that has rounded? See if you can get a torx drive larger than the allen head and tap it in with a hammer, then undo :daumenhoch:
-
whack a screwdriver into the alankey head, works for me !
if you cant sort it with a hammer you cant sort it with owt ;D
-
You can get some screw Extractors or Easy outs that will sort it in no time at all... £2.95 of Fleabay :daumenhoch:
http://cgi.ebay.co.uk/Rolson-5-Piece-Screw-Extractor-Stud-Bolt-Tap-Remover_W0QQitemZ370358083967QQcmdZViewItemQQptZUK_Hand_Tools_Equipment?hash=item563b0fe17f#ht_1150wt_1198 (http://cgi.ebay.co.uk/Rolson-5-Piece-Screw-Extractor-Stud-Bolt-Tap-Remover_W0QQitemZ370358083967QQcmdZViewItemQQptZUK_Hand_Tools_Equipment?hash=item563b0fe17f#ht_1150wt_1198)