RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: theRuler on April 05, 2006, 01:12 PM
-
can you get 2 pack paint in aerosol cans?
celly rattle cans are ok but the paint is so piss thin and chippable
-
good motor factors with mixing station should do it .
-
YUP:
There's a mixing shop just up the road from me that will do any colour and then put it into spray can for a little extra.
-
i am after base and clear, and primer
i will try and find a local paint shop that will do it!
thanks guys
-
autopaint international, mix any colour in a can, lovely wide full arc on the spray too.
-
autopaint international, mix any colour in a can, lovely wide full arc on the spray too.
cool site esp liked this page
http://www.autopaintinternational.com/colourpicker.html (http://www.autopaintinternational.com/colourpicker.html)
any one gonna do a how to on frame respray at all ?
prep methods, cleaning, base coats, final coats etc
whats good, bad, easy, hard etc
cos i aint ever done that sort of thing before and have a couple i would like to have a go at
-
i worked for autopaints as a paint mixer bitd lol
-
get the proper breathing aparatus graeme.....2 k contain cyanide mate
that fooking stuff kills ya.....
Dave
-
you can get solvent based basecoats and single pac laquer in aerosols guys but not 2 pac as thes are activated with a hardener and goes solid after a couple of hours
solid colours in aerosols arent 2 pac either as these are activated the same in 2 pac
and once activated have a couple of hour shelf life
if you give me a bit of time guys i will try and put together a how to paint your frame if you like with a prep guide that can be used for aerosols as well as 2 pac :daumenhoch:
-
graham ici do an etch priming aerosol which is an excellent product will post up a pic and number tomorrow :daumenhoch:
-
if you give me a bit of time guys i will try and put together a how to paint your frame if you like with a prep guide that can be used for aerosols as well as 2 pac :daumenhoch:
please :daumenhoch: cos i know i is a junior apprentice novice to paint spraying ::)
-
get the proper breathing aparatus graeme.....2 k contain cyanide mate
that fooking stuff kills ya.....
Dave
its the hardener
its n a s t y
-
http://www.bhopal.com/
just remember the 2 pac is isosienate we have to wear full face air fed masks cos it will burn your lung lining so be carefull with it remember what it did to all these peeps and that is the same stuff but in gas form not nice so always wear charcoal filter masks even with aerosols as cellulose is not good for you if you breath it in
PAINT SAFELY
[/color]
-
is that the bad stuff in the touch up paint you gave me craig.
the clear stuff.
im scared now :o.
-
yeah dave :LolLolLolLol:
making up and using as touch up is ok dave its when its atomised through a paint gun is when it is nasty :daumenhoch: well as long as you dont start drinking it :LolLolLolLol:
-
I used 2k in a can on my gjs replica,turned out ok
(http://)(http://www.radbmx.co.uk/archive/albums/b375/nogoodthis/gjs3.jpg)