RADBMX.CO.UK

Technical & Reference Section => Museum => Topic started by: Zippy on July 19, 2005, 08:36 PM

Title: Patterson
Post by: Zippy on July 19, 2005, 08:36 PM
(http://www.radbmx.co.uk/archive/albums/y80/hondadominator/DSCF0388.jpg)

Spec

Patterson PR200S Frame
Tange ARX Forks
Sumo Rims
KTT Hubs
Profile Cranks
Profile Spider
Profile Chainwheel
Izumi Chain
Dia-Compe MX100 Brake
GT Seatpost
Kashimax Aero Seat
CompVIII Tyres
Tuff Nech Stem
Patterson Bars
Tioga Beartrap Headset
A'me Grips.
Title: Re: Patterson
Post by: Bigplinky on July 20, 2005, 05:54 PM
Patterson PR200 Pro

(http://www.radbmx.co.uk/archive/albums/v637/bigplinky/Museum/Patterson2.jpg)

(http://www.radbmx.co.uk/archive/albums/v637/bigplinky/Museum/Patterson1.jpg)

Spec

GT Pro Bars
DK Pro Stem (now TNT Invert to bring the front end down a bit)
Oakley F1 grips
Tech 4 Levers (soon to be changed to tech 5)
MX1000 Brakes
Shotgun 2 seat (now changed to blue Kasi aero)
ACS seatpost clamp
Araya 7X rims
TNT Revolver hubs
Redline Flites 185mm
Tuff Neck Power Disc and Chain wheel
GT DX pedals (now changed to Gold Shimano DX)

The bike was originally my sister Joanne's but when she packed in in 85 it was a shame to let it go to waste.

Cheers

Andy Lincoln
Title: Re: Patterson
Post by: D.T.L.flyKUWA.. on June 07, 2007, 05:05 PM
1983 Patterson PR-200 complete....(http://img515.imageshack.us/img515/7039/bmx7778014gv4.jpg) (http://imageshack.us).................. :daumenhoch:
Title: Re: Patterson
Post by: se on January 02, 2008, 04:00 PM
1984 PR200

Redline 401s and chainring
Izumi chain
Tioga BB
SR pedals (Hutch now fitted)
Araya 7Xs
Phil Wood hubs
Tioga Comp111s
Patterson pads
Patterson post
Patterson Pro bars
Tuf Neck stem
Tuf Neck seatclamp
Shot Gun seat
Tech 111
MX1000
A'ME tris
Dia Compe cable
Zeronine Stadium plate
Tioga beartrap headset

(http://www.radbmx.co.uk/archive/albums/b278/steveearl/Picture003-3.jpg)

(http://www.radbmx.co.uk/archive/albums/b278/steveearl/Picture002-3.jpg)

(http://www.radbmx.co.uk/archive/albums/b278/steveearl/Picture001-4.jpg)
Title: Re: Patterson
Post by: (((sonic))) on February 09, 2009, 11:23 PM
My '83 PR-200

This is just about finished (chain and cable are going on the w/e)

This is has not been tightened, needs a polish and will be put together over the weekend.  :P

July 1983 PR-200

(http://www.radbmx.co.uk/archive/albums/ll466/pr200/P2071864.jpg)
(http://www.radbmx.co.uk/archive/albums/ll466/pr200/P2071870.jpg)
(http://www.radbmx.co.uk/archive/albums/ll466/pr200/P2071857.jpg)
(http://www.radbmx.co.uk/archive/albums/ll466/pr200/P2051828.jpg)
(http://www.radbmx.co.uk/archive/albums/ll466/pr200/P2051827.jpg)
(http://www.radbmx.co.uk/archive/albums/ll466/pr200/P2071865.jpg)
(http://www.radbmx.co.uk/archive/albums/ll466/pr200/P2051840.jpg)

Specs...

July 1983 Patterson Racing (Pr-200) Frame (Re chromed)
Patterson Forks (not drilled) (Re chromed)
Stu Thompson Bars (Re chromed)
Re anno'd UKAI 20 x 1.75 Rims
Pro Class Cranks (Re chromed)
Suntour XCII Pedals (Outer cages Show Polished)
Sugino Disc (Show Polished)
Sugino 46T Chainring (Show Polished)
Suntour power Stem (Show Polished)
Dia Compe 890 Caliper (NOS)
DX Lever (NOS)
Uni Pro Seat (NOS)
A'ME Tris (NOS)
Comp III Tyres - Rainbow- (NOS)
Uni "Patterson Plate" #3
Repop Pads C/O Esemdesign  :daumenhoch:

I will update with pics once put together,

Fast and Light  :P

B

Title: Re: Patterson
Post by: se on March 14, 2009, 06:07 PM
1983 Patterson PR200J mini

PR200J rechromed frame and undrilled forks
Hatta headseat
Campagnolo BB
Sugino 152mm cranks
Hutch mini beartraps
Izumi chain
Suntour 42T chainring
Suntour 17T freewheel
Araya 1/18 rims chrome
Bullseye hubs chrome
Swiss black alloy nipples and stainless spokes
Tioga Comp 3 tyres
Uni mini and cover
Suntour seatclamp
Tuff Neck mini stem silver
Powerlite Powerbend mini bars
A'ME mini duals
Dia Compe Tech 3 lever chrome
Dia Compe cable
Dia Compe mini caliper
Vans blocks
Prime mini plate
Patterson pads (repro)

(http://www.radbmx.co.uk/archive/albums/b278/steveearl/Picture001-6.jpg)
(http://www.radbmx.co.uk/archive/albums/b278/steveearl/Picture002-5.jpg)
(http://www.radbmx.co.uk/archive/albums/b278/steveearl/Picture003-5.jpg)
(http://www.radbmx.co.uk/archive/albums/b278/steveearl/Picture004-2.jpg)
(http://www.radbmx.co.uk/archive/albums/b278/steveearl/Picture005-2.jpg)
(http://www.radbmx.co.uk/archive/albums/b278/steveearl/Picture006.jpg)
(http://www.radbmx.co.uk/archive/albums/b278/steveearl/Picture007.jpg)
(http://www.radbmx.co.uk/archive/albums/b278/steveearl/Picture008.jpg)
Title: Re: Patterson
Post by: DIRTBIKER250F on November 14, 2009, 01:44 PM
1983 Patterson Pr200
                       
Original  Chrome Pr200 pro f&f            Ukai Gold Shiney side rims
Original Patterson seat post               Suzie large flanged Gold  hubs
Original Patterson Pad set                  Nos Green and Yellow second Gen comp 3s
83 Gt Pro bars                                 Yellow Kashimax vinyle seat
Nos Oakley b1b's                              Red Gen 1 double bolt DC seat clamp
Deep Western stem                           Chrome mx900 caliper
Hatta mx10 Head set                        180 Redline full wrap flights with original 44t bubble script chainring               
Chrome tech 3 lever                         Skyway Graphite pedals
1983 yellow stamped dc cable            Izumi Chrome chain

(http://www.radbmx.co.uk/archive/albums/p88/dirtbiker250f/P1100200.jpg)

(http://www.radbmx.co.uk/archive/albums/p88/dirtbiker250f/P1100211.jpg)

(http://www.radbmx.co.uk/archive/albums/p88/dirtbiker250f/100_1296.jpg)

(http://www.radbmx.co.uk/archive/albums/p88/dirtbiker250f/100_1306.jpg)

(http://www.radbmx.co.uk/archive/albums/p88/dirtbiker250f/100_1308.jpg)
Title: Re: Patterson
Post by: dordymush on January 05, 2010, 03:27 PM
my patterson pr200s.
when i first built it up.

(http://www.radbmx.co.uk/archive/albums/v229/dordymush/PIC_0011.jpg)

then kept looking at the patterson lads bikes with tuffs on and though i'll give it a go.not graffs but i like the look better than my spokes.

(http://www.radbmx.co.uk/archive/albums/v229/dordymush/PIC_0002.jpg)

then got sick of the yella lol. and started to put a few black bits on which i like better again lol.

(http://www.radbmx.co.uk/archive/albums/v229/dordymush/PIC_0203.jpg)
(http://www.radbmx.co.uk/archive/albums/v229/dordymush/PIC_0204.jpg)
Title: Re: Patterson
Post by: PlanetX on February 11, 2010, 10:29 PM
I built this with Richie Anderson's 1979 bikes in mind. It's not really a replica, but it's pretty close. Richie's was red, not blue and he had a pretty special frame with the brakes on the chain stays.

Frame: Anderson Avalanche, OG nickel, OG stickers
Fork: Redline Microline, NOS
Headset: Frankenstein Schwinn, Tange and Hatta parts
Stem: Tuf-Neck
Bars: Redline Microline V-Bar, OG finish
Seatpost: VDC fluted alloy
Saddle: Kashimax MX
Seatclamp: Suntour
Cranks: Campagnolo Strada 175 with Sugino, drilled, 51T chainring, Campagnolo chainring bolts, Campagnolo crank caps
BB: Torker sealed
Freewheel: Suntour, 3/32" 18-tooth
Pedals: Reedy
Chain: Regina Drilled
Wheels: Araya 7b front, Araya 20 x 1 1/8” rear, Suzue hubs
Tires: Mitsubishi Comp II 20 x 1.75 front, 20 x 1 1/8” Swallow rear
Brakes: Mafac center-pulls with Kool Stop Continental pads, Dia-Compe Quick Release cable hanger, Campagnolo cable clamps, Pre-Bent Dia-Compe with rubber sleeve
Grips: A’me Bubble Font Tri
Other: Vinyl frame and handle bar pads, Tuf-Neck stem pad, 44-16 Designs Handmade Replica number plate

(http://hphotos-snc3.fbcdn.net/hs061.snc3/12836_1257136958855_1542563208_660770_3405543_n.jpg)

(http://hphotos-snc3.fbcdn.net/hs061.snc3/12836_1257136678848_1542563208_660764_1596241_n.jpg)

(http://hphotos-snc3.fbcdn.net/hs041.snc3/12836_1257136638847_1542563208_660763_1955749_n.jpg)

(http://hphotos-snc3.fbcdn.net/hs061.snc3/12836_1257136998856_1542563208_660771_6119489_n.jpg)

(http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs041.snc3/12836_1257137158860_1542563208_660775_8071556_n.jpg)

(http://photos-e.ak.fbcdn.net/photos-ak-snc1/v2324/229/62/1542563208/n1542563208_152319_5069.jpg)
Title: Re: Patterson
Post by: JMCGT on July 25, 2010, 09:11 AM
I have 9 Pattersons, and here are a few..   20 Pro, 24 and a JR
(http://www.radbmx.co.uk/archive/albums/kk228/JMCGT/my%20favourites/IMG_0082.jpg)
(http://www.radbmx.co.uk/archive/albums/kk228/JMCGT/my%20favourites/IMG_0089.jpg)
(http://www.radbmx.co.uk/archive/albums/kk228/JMCGT/my%20favourites/IMG_0009.jpg)
(http://www.radbmx.co.uk/archive/albums/kk228/JMCGT/my%20favourites/IMG_0010.jpg)
(http://www.radbmx.co.uk/archive/albums/kk228/JMCGT/my%20favourites/IMG_7461.jpg)
(http://www.radbmx.co.uk/archive/albums/kk228/JMCGT/my%20favourites/IMG_7466.jpg)
Title: Re: Patterson
Post by: JMCGT on July 25, 2010, 09:15 AM
82 Long and a PR Pro
(http://www.radbmx.co.uk/archive/albums/kk228/JMCGT/my%20favourites/IMG_6997.jpg)
(http://www.radbmx.co.uk/archive/albums/kk228/JMCGT/my%20favourites/IMG_7007.jpg)
(http://www.radbmx.co.uk/archive/albums/kk228/JMCGT/my%20favourites/IMG_4644.jpg)
(http://www.radbmx.co.uk/archive/albums/kk228/JMCGT/my%20favourites/IMG_4645.jpg)
Title: Re: Patterson
Post by: martylaa on July 30, 2010, 07:57 PM
1984 Patterson PR240 Cruiser.
Parts List:
1984 Patterson PR240 Cruiser Frame and Forks with Original Chrome and Decals.
Patterson Cruiser Bars ( Rechromed )
Patterson Seatpost ( NOS prior to this build )
Patterson Padset Original
ESP FLying W Stem ( Polished up by Steve or Animal )
Profile Gen 3 Cranks ( Rechromed )
Skyway Graphite Pedals in Blue ( NOS prior to this build )
Dia Compe MX1000 Caliper with Dia Compe Tech 3 Lever in Gold ( NOS prior to this build )
Dia Compe Seatclamp in Gold
Oakley B1B grips in Yellow and Blue ( NOS prior to this build )
Tange 320 Headset with Gold Decals and Tange Locknut in Gold
Bullseye Hubs in Gold and Blue ( NOS prior to this build )
Araya 24" 7X Rims laced with DT Swiss Spokes. ( Anodised Gold by Paul at CustomColour )
Cyclepro Shotgun Seat in Yellow ( NOS prior to this build )
Rad Kaps in Blue
Tioga 24" Green/Blue Tyres
Izumi Chain in Gold
(http://www.radbmx.co.uk/archive/albums/uu137/martylaa/DSC_0217.jpg)
(http://www.radbmx.co.uk/archive/albums/uu137/martylaa/DSC_0218.jpg)

Title: Re: Patterson
Post by: markyp on November 11, 2011, 06:27 PM
1982 patterson long
Brent Patterson tribute bike

rechromed frame and forks,rechromed star bars and 3rd gen profie cranks
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/168301_498331957942_666952942_6022507_3472390_n-1.jpg)
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/PB110003.jpg)
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/P5270010.jpg)
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/PB110003_01.jpg)
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/PB110012.jpg)
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/P4110004.jpg)
Title: Re: Patterson
Post by: patto82 on December 02, 2011, 10:32 AM
Heya there rad bmx thought  i post up my pattertson long..
82model..
(http://i1214.photobucket.com/albums/cc498/patto82/jim1984008.jpg)
Me and a mate his riding a hutch pro racer i'm on my org patty long with org 83 non nurled patterson bars which are on the patterson now..
And my new patto now
(http://i1214.photobucket.com/albums/cc498/patto82/patto1.jpg)
(http://i1214.photobucket.com/albums/cc498/patto82/patto13.jpg)
(http://i1214.photobucket.com/albums/cc498/patto82/patto12.jpg)
(http://i1214.photobucket.com/albums/cc498/patto82/patto11.jpg)
(http://i1214.photobucket.com/albums/cc498/patto82/p4.jpg)[IMG]
Thanx for looking Jim
Title: Re: Patterson
Post by: neil on February 13, 2012, 05:17 PM
(http://i1080.photobucket.com/albums/j340/neilboro/033.jpg)

(http://i1080.photobucket.com/albums/j340/neilboro/035.jpg)

(http://i1080.photobucket.com/albums/j340/neilboro/037-1.jpg)
(http://i1080.photobucket.com/albums/j340/neilboro/034-1.jpg)

Title: Re: Patterson
Post by: markyp on September 26, 2012, 05:32 PM
ORIGINAL CHROME 1984 PR200 PRO
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/P9260013.jpg)
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/P9260016.jpg)
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/P9260018-1.jpg)
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/P9260021-1.jpg)
(http://www.radbmx.co.uk/archive/albums/pp119/parsnip73/P9260001.jpg)
Title: Re: Patterson
Post by: andypatt444 on December 21, 2012, 09:35 PM
Patterson PR200. 1984.(http://i1134.photobucket.com/albums/m610/andypatt444/BMX%20stuff/Pattersonnewstickers24812008.jpg) (http://i1134.photobucket.com/albums/m610/andypatt444/BMX%20stuff/Pattersonnewstickers24812009.jpg) (http://i1134.photobucket.com/albums/m610/andypatt444/BMX%20stuff/Pattersonnewstickers24812010.jpg)(http://i1134.photobucket.com/albums/m610/andypatt444/BMX%20stuff/Pattersonnewstickers24812007.jpg) (http://i1134.photobucket.com/albums/m610/andypatt444/BMX%20stuff/Pattersonnewstickers24812003.jpg) Patterson bars. Patterson seatpost. Araya rims. Ame grips. Diacompe Mx1000. Tange BB. SR crank, stem, Post clamp, chainwheel and spider. Hutch seat.
Title: Re: Patterson
Post by: Retrodan72 on March 29, 2014, 08:51 PM
1983 Patterson PR200

(http://img.tapatalk.com/d/14/03/30/uba6e5eh.jpg)

(http://img.tapatalk.com/d/14/03/30/na9agaqe.jpg)

(http://img.tapatalk.com/d/14/03/30/8asata8y.jpg)




Sent while strangling Kojak from my iPhone
Title: Re: Patterson
Post by: claywalk on July 02, 2016, 06:36 PM
This is my Patterson 24" rebuild project.

I am putting back together a bike exactly like the one I raced '84-'86.

My wheelbuilder is out of town for a week so it's just going to have to wait a little longer..  ;(
SimplePortal 2.3.5 © 2008-2012, SimplePortal