RADBMX.CO.UK

Cupid Stunt Bike of the Month/Year => Past Entries => Cupid Stunt Bike of the Month/Bike of the Year => 2010 => Topic started by: pickle on June 05, 2010, 07:56 AM

Title: BOTM Jun 2010 - Vote Results
Post by: pickle on June 05, 2010, 07:56 AM: Post up your June builds here, usual rules please....up to 4 pictures and a bit of a parts run down never hurts does it :daumenhoch:
Title: Re: JUNE - BOTM
Post by: moanjam on June 06, 2010, 11:35 AM: 1977 RACE INC PRO

race inc 1977 pro frame
redline mx forks
araya 7b's on shimano l/f hubs
kashi super pro suede track saddle
campagnolo 3pc cranks
1st gen tuf-neck clamp
V bars
ouri grips
rat traps
d/c brakeset
wald 13/16 seatpost
cheng shin combo nobblies
proto plate

(http://www.radbmx.co.uk/archive/albums/ss15/moanjam1/DSCF1960.jpg)
(http://www.radbmx.co.uk/archive/albums/ss15/moanjam1/DSCF1985.jpg)
(http://www.radbmx.co.uk/archive/albums/ss15/moanjam1/DSCF1946.jpg)
(http://www.radbmx.co.uk/archive/albums/ss15/moanjam1/DSCF1959.jpg)
Title: Re: JUNE - BOTM
Post by: Bettyswallocks on June 06, 2010, 11:58 AM: S&M Holmes

Holmes frame
1" Pitchforks
1" Redneck
Slam bars (dancing man logo)
Longnecks
Tech 77
ad 990
S&M shield seat
Primo rod post
Peregrine seatclamp
GT Profile cranks
Profile ripsaw chainwheel
Wellgo pedals (temp till i find either s&m or shimano dx's)
Peregrine semi pro hubs
Sun rhyno lite rims (early versions)
v monster rear tyre/dirt monster front tyre
and a red chain

(http://www.radbmx.co.uk/archive/albums/m48/markw33/27-05-10003-1.jpg)

(http://www.radbmx.co.uk/archive/albums/m48/markw33/27-05-10007-1.jpg)

(http://www.radbmx.co.uk/archive/albums/m48/markw33/27-05-10005-1.jpg)

(http://www.radbmx.co.uk/archive/albums/m48/markw33/27-05-10008.jpg)
Title: Re: JUNE - BOTM
Post by: pickle on June 12, 2010, 04:05 PM: Skyway street beat frame forks and MKI EZ bars
Blue Z rims on sealed suzie hubs (huge thanks to STIDDS for building em)
Sugino 1 piece crank
Victor DX pedals
Nippon brakes
Teck 5 levers
DC cables
AME Rounds
DK freestyle stem
Tange seat clamp
renthal seat post
Kashimax FS seat

(http://www.radbmx.co.uk/archive/albums/b339/robertbransby/Picture002-12.jpg)
(http://www.radbmx.co.uk/archive/albums/b339/robertbransby/Picture008-10.jpg)
(http://www.radbmx.co.uk/archive/albums/b339/robertbransby/Picture007-8.jpg)
(http://www.radbmx.co.uk/archive/albums/b339/robertbransby/Picture015-9.jpg)
Title: Re: JUNE - BOTM
Post by: torkertony on June 17, 2010, 11:33 AM: Hutch Trickstar F & F's
Hutch Ladder Bars
Hutch Seat Post
Hutch Deep 'H' Stem
Hutch Bear Traps (NOS)
MX 1000's
Suntour Seat Clamp (NOS)
Kashi MX (NOS)
Ame's (NOS)
Tioga Comp III Tyres (NOS)
Suzue Sealed Hubs (NOS)
UKAI Rims (NOS)

(http://www.radbmx.co.uk/archive/albums/k376/torkertony/Trickstar.jpg)

(http://www.radbmx.co.uk/archive/albums/k376/torkertony/H1.jpg)

(http://www.radbmx.co.uk/archive/albums/k376/torkertony/H2.jpg)

(http://www.radbmx.co.uk/archive/albums/k376/torkertony/H3.jpg)
Title: Re: JUNE - BOTM
Post by: Macmania on June 17, 2010, 04:43 PM: 1983 GT Expert.

Parts List
83 GT Expert Frame and Forks (un-drilled)
GT Pro Bars
GT Seat Post
Beartrap II Headset
SR MS-422 Stem
AME Grips
Dia Compe MX900 Brake with Tech III Lever
KKT Lightning Pedals
Kashimax MX Seat
Dia Compe MX Seat Clamp
Izumi Chain
Redline Bubble Font Chainwheel
Redline 401 Flight Cranks (180) Single Pinch Full Wrap
UKAI Speedline Wheels
Tioga Comp III's
Uni Turbo Number Plate
Repro Pad Set

(http://i1006.photobucket.com/albums/af181/MTracing/P1000426.jpg)
(http://i1006.photobucket.com/albums/af181/MTracing/P1000427.jpg)
(http://i1006.photobucket.com/albums/af181/MTracing/P1000428.jpg)
(http://i1006.photobucket.com/albums/af181/MTracing/P1000431.jpg)
Title: Re: JUNE - BOTM
Post by: meticulous on June 18, 2010, 10:34 PM: huffy pro thunder...

every nut and bolt is original, all i had to replace was the tyres, grips and chain..

(http://www.radbmx.co.uk/archive/albums/ii194/quattro2008/bmxpickies012.jpg)

(http://www.radbmx.co.uk/archive/albums/ii194/quattro2008/bmxpickies013.jpg)

(http://www.radbmx.co.uk/archive/albums/ii194/quattro2008/bmxpickies014.jpg)

(http://www.radbmx.co.uk/archive/albums/ii194/quattro2008/bmxpickies017.jpg)
Title: Re: JUNE - BOTM
Post by: motomagII on June 19, 2010, 08:43 AM: (http://)(http://www.radbmx.co.uk/archive/albums/v638/motomagII/103_1650.jpg)
(http://)(http://www.radbmx.co.uk/archive/albums/v638/motomagII/103_1652.jpg)
(http://)(http://www.radbmx.co.uk/archive/albums/v638/motomagII/103_1651.jpg)

falcon pro theta
90 percent of this is original parts with survivor chrome finish
Title: Re: JUNE - BOTM
Post by: motomagII on June 19, 2010, 08:46 AM: and another to bump numbers up :LolLolLolLol:

(http://)(http://www.radbmx.co.uk/archive/albums/v638/motomagII/103_1648.jpg)
(http://)(http://www.radbmx.co.uk/archive/albums/v638/motomagII/103_1645.jpg)
(http://)(http://www.radbmx.co.uk/archive/albums/v638/motomagII/103_1644.jpg)
falcon pro 16 incher
again most of this is original just had to change grips,tyres ,pedals,i have the original padset (used apart from frame pad new one fitted)and i have the original seat but havent sorted how to resto it yet lol
Title: Re: JUNE - BOTM
Post by: N13L VV on June 19, 2010, 09:51 PM: Ok heres mine . Factory Spec Mk2 Raleigh Superburner .

(http://www.radbmx.co.uk/archive/albums/c244/tierna2003/superburner008.jpg)

(http://www.radbmx.co.uk/archive/albums/c244/tierna2003/MK2Superburner008.jpg)

(http://www.radbmx.co.uk/archive/albums/c244/tierna2003/MK2Superburner009.jpg)

(http://www.radbmx.co.uk/archive/albums/c244/tierna2003/MK2Superburner013.jpg)
Title: Re: JUNE - BOTM
Post by: bobafett on June 20, 2010, 11:37 PM: 1982 pro-class "custom"

1982 mongoose pro-class frame and forks in custom metalic black
Pro-size mongoose pro-class bars
NOS original genuine mongoose grips (2nd Gen)
mongoose pro-class stem
original survivor pro-class wheels
NOS cheng-shin skinwall comp3 1.75/1.75
NOS MKS BM5 rat traps
mongoose stamped crank
mongoose stamped spider
NOS takagi 43T chain ring
mongoose stamped BB
tioga beartrap headset
NOS Kashimax MX seat
stainless steel seatpost
NOS DC twin bolt clamp
NOS DC MX1000 rear
NOS DC Tech 3
NOS DC cable/clips
custom decal set
original survivor mongoose race plate with original mongoose decals

(http://www.jpdeane.com/BMX/mybikes/1982proclass/1982_custom_proclass_00.JPG)

(http://www.jpdeane.com/BMX/mybikes/1982proclass/1982_custom_proclass_03.JPG)

(http://www.jpdeane.com/BMX/mybikes/1982proclass/1982_custom_proclass_02.JPG)

(http://www.jpdeane.com/BMX/mybikes/1982proclass/1982_custom_proclass_01.JPG)

:)
Title: Re: JUNE - BOTM
Post by: diesel on June 24, 2010, 08:45 PM: This is my second Mauler build - the 1st I regrettably sold, so when the chance came up to build another, I jumped at it - enjoy

Its impossible to tell the exact date of one of these frames by their serial numbers - only that they were made from 1982 to 1984

A little history 1st:

Se Racing 24" Mauler: 1982/84 - Race inc. manufactured version

(text taken from the Scott Breithaupt interview on bmxultra.com)

The Mauler

Scot: This was a name we came up with for our round tube alloy models, made by Race Inc. Bill Bastian wasn't doing
very well with his line and we started buying up all he could make and labeling them with SE-Mauler stickers.
We were so back-ordered with PK's and Quads, we needed frames to sell... Later , I designed the 24" Mauler and had
it produced by Murray for us to again compete with the overseas makers.

We really prided ourselves on "Made in USA" and stuck it out as long as we could with all
models. Unfortunately, Murray was unable to meet our quality standards, and we discontinued the line.

(http://www.radbmx.co.uk/archive/albums/v655/dieseldmc/SEM6850.jpg)

(http://www.radbmx.co.uk/archive/albums/v655/dieseldmc/SEM6838.jpg)

(http://www.radbmx.co.uk/archive/albums/v655/dieseldmc/SEM6846.jpg)

(http://www.radbmx.co.uk/archive/albums/v655/dieseldmc/SEM6844.jpg)

Parts Rundown:

SER - 24" Mauler frame
SER - 24" Landing gear forks
SER - Cruiser Bars
SER - Troxel Seat & post combo
SER - Repro padset
Tuff Neck 2000 Stem
Hatta Headset
Araya Rims + CP Suzie Hubs
Comp III tyres
Sugino 400 Cranks
Suntour pedals
Dia Compe MX1000 brakes
Title: Re: JUNE - BOTM
Post by: N13L VV on June 26, 2010, 11:25 PM: OK chaps im entering a second build this month if thats allowed as i just finished i today.

My 1984 SKYWAY TA

SPEC LIST

84 Skyway TA F&F bare metalled and repowdered with new delcals fitted
skyway EZ bars
skyway cali lite padset
Blue AME grips
Blue Dia compe nos tech4 levers and mx1000s with white nos copy Tuff pads
Blue cables
Blue Izumi chain
Blue nos Kashimax Aero
Blue nos 20x1.75 & 20x2.125 Cheng shins
Blue nos suntour 43t chainring
Blue nos Shimano SX 1/2" pedals
Sugino powerdisc
Sugino stamped arm OPC
polished tange bottom bracket including bearing cups
polished Suntour powerstem
Tange Headset (repainted and blue decal fitted)
Shimano DX seatpost (polished andnew decals fitted)
New white Skyway tuffs fitted with retrochromes centercaps and i made some chrome centre decals to cover the white plastic bit of hub that pokes through :wink: .
Wheels fitted to F&F with nylon washers so there are no build marks .

(http://www.radbmx.co.uk/archive/albums/c244/tierna2003/DSC05037.jpg)

(http://www.radbmx.co.uk/archive/albums/c244/tierna2003/DSC05039.jpg)

(http://www.radbmx.co.uk/archive/albums/c244/tierna2003/DSC05040.jpg)

(http://www.radbmx.co.uk/archive/albums/c244/tierna2003/DSC05038.jpg)
Title: Re: JUNE - BOTM VOTE OFF!!!!!
Post by: pickle on July 01, 2010, 08:08 AM: Get your votes in fellas!!! :daumenhoch:
Title: Re: JUNE - BOTM VOTE OFF!!!!!
Post by: monkian on July 01, 2010, 04:16 PM: My vote's in :daumenhoch:
Really nice to see such a wide range of builds 8)
Tough choice again. Great work lads.
Title: Re: JUNE - BOTM VOTE OFF!!!!!
Post by: brettypeeps on July 01, 2010, 09:48 PM: My votes in but it was a dificult choice between three for me but in the end I went for Steve Costas Performer :daumenhoch:
Title: Re: JUNE - BOTM VOTE OFF!!!!!
Post by: hunterdubber on July 01, 2010, 10:26 PM: A few that stand out for me , but I've voted and it ticks all the right boxes :smitten:
Title: Re: JUNE - BOTM VOTE OFF!!!!!
Post by: Bigplinky on July 04, 2010, 08:28 AM: God what a hard month to vote on :D
Title: Re: JUNE - BOTM VOTE OFF!!!!!
Post by: Jon The Bassist on July 05, 2010, 03:16 PM: Yup, not easy at all!
Title: Re: JUNE - BOTM VOTE OFF!!!!!
Post by: jT Racing on July 05, 2010, 07:07 PM: was between the mauler and the race inc. went with the race inc because it's a bit different and done well. That mauler is mint though.
Title: Re: JUNE - BOTM VOTE OFF!!!!!
Post by: pickle on July 06, 2010, 08:18 AM: neck and neck between two lovely looking bikes! get your votes in guys to decide the winner! :daumenhoch:
Title: Re: JUNE - BOTM VOTE OFF!!!!!
Post by: martylaa on July 10, 2010, 11:26 AM: i went for the race inc but well done to both winners craking builds :daumenhoch:
Title: Re: JUNE - BOTM VOTE OFF!!!!!
Post by: diesel on July 10, 2010, 01:44 PM: darn... I voted for the Race Inc....

nice build that Race Inc. well worth my vote :daumenhoch:
Title: Re: JUNE - BOTM VOTE OFF!!!!!
Post by: brettypeeps on July 10, 2010, 01:58 PM: Well that was a close and all the top three were hard to pick between well done great builds :smitten: :smitten:
Title: Re: JUNE - BOTM VOTE OFF!!!!!
Post by: pickle on July 10, 2010, 04:42 PM: Awesome builds and two worthy winners.......personally I'm well stoked 6 people liked my beat...cheers guys :daumenhoch:
Title: Re: JUNE - BOTM VOTE OFF!!!!!
Post by: brettypeeps on July 10, 2010, 09:24 PM: Quote from: pickle on July 10, 2010, 04:42 PM
Awesome builds and two worthy winners.......personally I'm well stoked 6 people liked my beat...cheers guys :daumenhoch:

I loved you streetbeat and love the blue green combo. If I het that many votes on my master if the postman turns up with my stuff from bishop I will be happy. Great job on that bike. The cometion is always tuff mow every month is like bike of the year if you het 1 vote you are doing a great job :daumenhoch: