RADBMX.CO.UK
Old School BMX 1980 - 1988 => Old School Race (riders ready, pedals ready... GO!!) => Topic started by: Stodgy on June 08, 2010, 05:20 PM
-
Hello chaps, been building this one for a while now.
According to JJR Reference and Radman, this is a USA made Hutch Hollywood or Pro Racer frame...both were the same.
Okay, gone a bit picture mad...sorry, but it is pretty.
Spec:
Frame & Forks: USA Hutch Hollywood/Pro Racer
Bars: Hutch Pro Racer
Grips: Oakley .5 NOS
Stem: Hutch Pro Western H NOS
Headset: Hatta Chrome
Plate: Hutch NOS
Lever: Tech 3 NOS
Cable: Dia Compe
Caliper: MX1000 NOS
Seat: Kashimax Aero NOS
Seatpost: Hutch Tai NOS
Seatclamp: Hutch Donut NOS
Wheels: Pro-Class with Suzue Sealed Hubs
Tyres: Comp III Gen 2 NOS
Crank: Redline Full Wrap Single Pinch
Spider: Sugino Powerdisc
Chainring: GT NOS
Chain: Izumi NOS
Pedals: Hutch Beartraps NOS
Bottom Bracket: Mongoose
Padset: Hutch JDB
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC_2746_small.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC_2745_small.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC_2747_small.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC_2752_small.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC_2761_small.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC_2759_small.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC_2756_small.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC_2754_small.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC_2765_small.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC_2766_small.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC_2767_small.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC_2764_small.jpg)
(http://www.radbmx.co.uk/archive/albums/b292/stodgy1/DSC_2763_small.jpg)
Hope you like.
-
i likey.
on another note,there were two different frames used for the Hollywood... as you said the same as the Pro and like my H.W,where the seat stays meet the seat tube,they are welded below the centre line of the top tube.
-
Real nice build! :daumenhoch:
The PC rims look sweet on it
-
i likey.
on another note,there were two different frames used for the Hollywood... as you said the same as the Pro and like my H.W,where the seat stays meet the seat tube,they are welded below the centre line of the top tube.
Yep, that seat stay position was what was confusing me at first, I didn't think it could be a real Hollywood...but with them making both everything else is correct.
Happy days
:daumenhoch:
-
sweet build Dave ! :coolsmiley:
-
Humdinger :4_17_5: :4_17_5: :4_17_5: :smitten:
Dib dobs Plate :LolLolLolLol:
Although i do have a HUTCH plate here, it's not in that condition, it's slightly cracked...... Well a lot actually. :'(
-
http://img.photobucket.com/albums/v213/mikamagic1/Snapshot2008-11-1819-44-20.jpg
this looks like your version to me.
-
very nice dave, dib dobs the tyres if you split :LolLolLolLol: they are lush mmmmmm tyres of the month for sure :smitten:
-
Great job Dave.........looks ace :4_17_5:
-
Lovely depth of field... :4_17_5:
-
god damn loving it!!who said pink was for girls :smitten: :smitten: :smitten: :smitten: :smitten: :smitten: :smitten: :smitten: :smitten:
-
I would even swap my ET for that :D
-
Lovely depth of field... :4_17_5:
Why thank you.
:daumenhoch:
-
lovely Dave :smitten:
nice to see that the pink pound is still pushing the economy along ;)
-
i think the edges on that stem could do with polishing down a little though ;)
-
Bloody lovely that is, I love a bit off pink :4_17_5:
-
Cool that...are you growing a massive "Miranda" Tash to go with it :LolLolLolLol:
-
Very nice young Davros :daumenhoch:
-
Cool that...are you growing a massive "Miranda" Tash to go with it :LolLolLolLol:
Yep, and I wear a pink n red race suit to the shop everyday.
-
i think the edges on that stem could do with polishing down a little though ;)
Yep and the pedal cages too. Always look so much better polished off.
-
Cool that...are you growing a massive "Miranda" Tash to go with it :LolLolLolLol:
Yep, and I wear a pink n red race suit to the shop everyday.
I love You :smitten:
-
tis very lovely :smitten:
-
Nice build, quality parts all round :daumenhoch:
-
:4_17_5:
-
Yep, that's a belter there Dave. Looks the dogs mate :4_17_5:
:daumenhoch:
-
Top notch Dave :daumenhoch:
-
Pretty as your pictures :daumenhoch:
-
Hi. I am new to this site. I remember that Hutch bike. Really nice.
Sorry to sound stupid but is that bike a new bike or is it refurbished? Could I buy one and if so where?
Thanks Jack.
-
Isn't she pretty in pink! Very nice Dave :daumenhoch:
-
dave ...hollywoods had a serial number .. u said urs dont right ??
-
dave ...hollywoods had a serial number .. u said urs dont right ??
Can't see one on their Lee, but the paint is thick on it...all I know for now is that it is US made, never ridden and was supplied to me pink. That's why I said Hollywood/Pro Racer in the opening thread.
I guess I'll need to scratch the paint away at somepoint to make a positive ID.
-
Looking really sweet and eighties. :4_17_5:
Great looking bike and the PC rims look great on it, well done :daumenhoch:
-
dave we can x ray the dropout to see if there is a serial number, anyway just get it sold
-
you're to big for that kids bike :coolsmiley:
oh alright! it's the nuts
-
FOR SALE at MK10...gotta fund a trip with fat head.
Speak to me if you're interested.
x
-
good lad dave.....................DEW TOUR HERE WE COME :D
-
your gonna sell that to share a room with "HIM" :idiot2:
-
your gonna sell that to share a room with "HIM" :idiot2:
We're lovers.
-
Bet Petes the giver and Dave's the taker
-
What! with his back ???