RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: animal on July 03, 2010, 08:21 PM
-
Bought a pair of Proclass wheels recently as below . But they had some really bad flats and damage 2 sides of rims.
(http://www.radbmx.co.uk/archive/albums/q103/animalmrd/IMG_2170.jpg)
(http://www.radbmx.co.uk/archive/albums/q103/animalmrd/IMG_2168-1.jpg)
(http://www.radbmx.co.uk/archive/albums/q103/animalmrd/IMG_2169-1.jpg)
Got me thinking of ways 2 remedy this :-\ Got my brain round it and made some tools up ;) A press 4 straightening the flats in the rims and an anvil 4 sorting out the deformed and bulging sidewalls.
this is the press fitted in the vice in action ;D
(http://www.radbmx.co.uk/archive/albums/q103/animalmrd/IMG_2172.jpg)
(http://www.radbmx.co.uk/archive/albums/q103/animalmrd/IMG_2171.jpg)
The anvil
(http://www.radbmx.co.uk/archive/albums/q103/animalmrd/IMG_2174.jpg)
And with rim in situ during hammering session :D
(http://www.radbmx.co.uk/archive/albums/q103/animalmrd/IMG_2176.jpg)
(http://www.radbmx.co.uk/archive/albums/q103/animalmrd/IMG_2175.jpg)
All worked well cos when I wanted 2 show Simon (Cupid Stunt) the results I could barely make out where I had repaired them 8)
Finished these yesterday all trued up :D Used the old spokes just cleaned them up , new Nips , polished rims after hours of flatting :tickedoff: and cleaned up the hubs. Lovely Jubbly :smitten:
(http://www.radbmx.co.uk/archive/albums/q103/animalmrd/IMG_2195.jpg)
(http://www.radbmx.co.uk/archive/albums/q103/animalmrd/IMG_2196.jpg)
(http://www.radbmx.co.uk/archive/albums/q103/animalmrd/IMG_2197.jpg)
-
bloody good aint ya :)
-
Nice job. That's spot on looking now. :)
Brian :daumenhoch:
-
Good resto skills there mate :daumenhoch: I bet they end up looking minty mint.
-
Not sure why but while reading this i got the A-Team music in my head :LolLolLolLol:
Great work though Steve :4_17_5:
-
pukka as always :daumenhoch:
-
Seriously cool skills 8)
-
way to go, Dr. Animal :daumenhoch:
-
Great result good on ya :daumenhoch:
-
Good work/skills there Stevo :coolsmiley:
The amount of times I needed one of those little anvils :-\
Funny enough my current pro class survivors are under going the same treatment :daumenhoch:
due to being buckled the same no flats though ::)
-
Well good, must have thrown out loads of rims you could have repaired over the years ::)
-
Well in Steve - skills again mate :coolsmiley:
-
Truly the king of the hammer
well done mate
-
very cool resto skills :4_17_5:
-
Great job.......top resto :4_17_5:
-
Finished pics added :coolsmiley:
-
:daumenhoch:
-
Superb end result Steve :4_17_5:
I'll look at em next weekend :coolsmiley:
-
Truly the king of the hammer
well done mate
I did try this with just a hammer (rubber) and it got a 24" rim I damaged at Cheddar pretty true, but not as parfait as that!
U gonna be offering this service at MK? or at least renting out your anvil/press combo?!
-
Not sure why but while reading this i got the A-Team music in my head :LolLolLolLol:
Fookin ell Gaz, I was doing exactly the same thing :LolLolLolLol:
Steve - pleeeeeeeeeeeeeeeeeeeeeeeeeeeeze bring that vice with you on Saturday, I've a got a 7X rim that's done a tour of Iraq by the looks of it and that would be just the ticket :smitten: :smitten:
The 2am club love you long time Steve :2funny: :2funny: :coolsmiley:
-
Awesome stuff Steve :4_17_5:
-
Wow,
i have found tis beautifull retoration today. itīs a great work :daumenhoch:
But these are the moments where I think: did they have no wife at home? >:D
Cheers
Alfredo
-
Brill job, now if I can get hold of some bloody pro class rims I can send them your way ::)
-
Bloody excellent job,i could have been doing with this for 1 of my sets of pro class as they are a little bashed and bruised etc :daumenhoch:
-
If u want 2 borrow the kit or need me 2 fix them lmk :D
-
If u want 2 borrow the kit or need me 2 fix them lmk :D
Awesome I've got a couple of 7x I was just gonna bin as got a few dings in them
Am i ok to send onto you mate?
-
If u want 2 borrow the kit or need me 2 fix them lmk :D
Awesome I've got a couple of 7x I was just gonna bin as got a few dings in them
Am i ok to send onto you mate?
Pm me fella ;) will sort this 4 ya :daumenhoch:
-
Wow, quality. I've got a pro class rim that need the dent sorting out. You don't live anywhere near the midlands do you? I'd pay you to sort it for me???
-
You don't live anywhere near the midlands do you?
Steve's a Yam Yam mate so unfortunately he IS near the Midlands :LolLolLolLol:
-
Top resto that :4_17_5:
I'd have bombed them :LolLolLolLol: , with the right tools & skills you can save anything .
The two things imm missing ;D
-
Fecking top job mate "wantit"
I had to just use a hammer :(
You need to make a welded up kit to sell :daumenhoch: