RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: martylaa on July 05, 2010, 11:06 PM
-
Well what ya reckon, say if you had 2 old bmx's would it be possible to do a cut and shut and make a 24" cruiser out of the bikes???
I was thinking surely they would be the same geometry as a 20" but with added length on the forks, rear drops and the seatpost???
What ya's think???
-
I reckon that would be an interesting job... the forks would be relatively easy. The back of the bike will have to have alot shallower angle from the seatpost so you can get the bigger wheel in though. Enjoy :daumenhoch:
-
It has beenm done before, I remember seeing somebody do a haro as your saying it's on here somwhere.
There is a little work to do but I think sawzall could maybe help you with info etc as I think he done the haro
-
The chap who runs harofreestyler.com did it with a master if i remember right.
-
It has beenm done before, I remember seeing somebody do a haro as your saying it's on here somwhere.
There is a little work to do but I think sawzall could maybe help you with info etc as I think he done the haro
Yeah that's the one...can't be arsed to find the link.
-
They've been done alot Marty :) very nice some of them , but they aren't genuine O/S
As Dale said it was done with a white Haro Master , well done too , I might add
They've done loads over at Rockford , GT Performers , etc
-
Here's the link but the pics have gone........
http://www.radbmx.co.uk/forum/index.php'topic=70412.0
-
http://bmxmuseum.com/forums/viewtopic.php?id=63554
just found someone who did a cooks bros from 2 old busted up 20" cook bros
looks well nice.....
-
Yeah that's the bunny :4_17_5:
-
This was on here a couple of years ago,I think , or one very similar
http://bmxmuseum.com/forums/viewtopic.php?pid=1368929
-
As dale said it was done with a white Haro Master , very well done too , I might add
They've done loads over at Rockford , GT Performers , etc
Any pics of a 24 performer..sounds cool :shocked:
-
http://bmxmuseum.com/forums/viewtopic.php?id=63554
just found someone who did a cooks bros from 2 old busted up 20" cook bros
looks well nice.....
Remember that one as well....stunning :coolsmiley:
-
think someone did a 24" trickstar to ?
-
As dale said it was done with a white Haro Master , very well done too , I might add
They've done loads over at Rockford , GT Performers , etc
Any pics of a 24 performer..sounds cool :shocked:
Rockford show 2009 I reckon , Jase ;)
Click the link
http://www.google.com/imgres?imgurl=http://2.bp.blogspot.com/_CvisyKAMxoM/SkUyP0gXRvI/AAAAAAAAAGU/Cue7kVYhbS0/s320/rockford_09_066_lg.jpg&imgrefurl=http://knightbikeco.blogspot.com/2009/06/best-retro-bmx-rockford-2009.html&usg=__Q_NUlc9hFvmVhv1L9DMO76DJAyY=&h=240&w=320&sz=27&hl=en&start=1&um=1&itbs=1&tbnid=PVcsnz6Xv72R4M:&tbnh=89&tbnw=118&prev=/images%3Fq%3Drockford%2B2009%26um%3D1%26hl%3Den%26sa%3DG%26tbs%3Disch:1
-
wow some nice examples there chaps, shame johnny choppers stopped doing stuff like that is'nt it
right now to pm phil again lol
-
wow some nice examples there chaps, shame johnny choppers stopped doing stuff like that is'nt it
right now to pm phil again lol
They do them already made ,Marty did you not see the link I posted mate ???
Knight bicycles ,, Edd Ferri ,,custom tuffs , profile repops ,repop T/A's etc , etc
mind you you'd probably have to forevvvvvvvvvvvvvvver for it to arrive , going off his previous customers waiting times :D
-
aye i hear ya chris mate
dunno just thinking about something its always bugged me so just put the question out there, not sure how much bigger a 24" hutch ( for example ) frame against 20" frame is???
i.e length of the forks and tubes compared to a 20 say
24" Hutch Judge anyone :daumenhoch:
-
Weren't all the Hutch cruisers made by MCS
the XL24 was and they're cheap as chips to buy ,
damn sight cheaper than getting someone to do you a custom built bike
even if made out of a couple of Raiders :D
I'd weigh up the cost , it's only gonna be worth any value to yourself ,,,,as it wouldn't be at all collectable (non original )
as with all retro/ custom stuff
but would be a damn good project , and done right , they don't half look cool :coolsmiley: :smitten:
-
Hmmmmmm
just had a couple of interesting pm's with Marty ::)
and told him to get his arse in gear :D ;D
Could be something very nice at the end of this pipeline ::)