RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: pickle on July 29, 2010, 08:30 AM

Title: Profile crank axle
Post by: pickle on July 29, 2010, 08:30 AM

anyone know if they came in diferent widths?  fitted mine and after i've spaced out the sides so the crank arms don't foul the chainstays there's not much for the arms to bolt to  :-\

Title: Re: Profile crank axle
Post by: moley on July 29, 2010, 08:43 AM

I have a few GT Profile cranks and the spindles are 2 lengths with about 6-8mm difference between them.

Title: Re: Profile crank axle
Post by: pickle on July 29, 2010, 03:01 PM

funny enough these are GT ones as well.........should be okay but think i'll get a longer one in time  :daumenhoch:

Title: Re: Profile crank axle
Post by: hooga1975 on July 29, 2010, 04:00 PM

Are they the cranks you bought off me?

I had them on my GT cruiser for a few yews and I thashed that round my local trails spot and never had a poblem with them coming loose.  I had to use quite a few spacers on them too, but they were fine.

Title: Re: Profile crank axle
Post by: Gary72 on July 29, 2010, 09:06 PM

Yes, Not 100% on the older ones, Think there was 2 sizes. Now there is loads. Just got some new cranks with the Gun Drilled Hole. Seems wrong being able to look through the axle :LolLolLolLol:
http://www.profileracing.com/estore2/index.php?productid=70