RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: endo on August 31, 2010, 09:25 PM
-
hi guys trying to fit a new eclat intergrated headset to a 2009 united 40 frame with some 2000ish pitch forks and just cant seem to stop movement ,if i tighten the preload bolt so there is no movement then you can hardly turn the bars any ideas cheers :D
-
:) Do you have enough stem spacers? Sometimes adding a 1 or 3mm spacer will solve the problem..
-
You haven't put a bearing in the wrong way up have you? Sounds daft but is easily done. ;D