RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: sid1972 on September 16, 2010, 08:54 PM
-
Hi peeps,
did a bit of wheeling and dealing with youngy to obtain this frame, I am sucker for all things sad (the frame not youngy ;D).
Someone had welded a later brake bridge to the rear forks :shocked:
(http://www.radbmx.co.uk/archive/albums/ii368/sid1972/Forsaleitems0041.jpg)
(http://www.radbmx.co.uk/archive/albums/ii368/sid1972/Forsaleitems0071.jpg)
The welds were extremely well done so I had my fingers crossed that the damage caused by this was only minor..
(http://www.radbmx.co.uk/archive/albums/ii368/sid1972/DSCF1086.jpg)
Stuck a new disk in the old grinder and went for it...
(http://www.radbmx.co.uk/archive/albums/ii368/sid1972/DSCF1087.jpg)
(http://www.radbmx.co.uk/archive/albums/ii368/sid1972/DSCF1089.jpg)
(http://www.radbmx.co.uk/archive/albums/ii368/sid1972/DSCF1088.jpg)
well happy with the results :) Just need some forks now - anyone got any, cali of tange pinch jobbies?
:daumenhoch:
-
Top job Si :daumenhoch:
-
8) 8) 8) 8)
-
:4_17_5:
Is that some kind of serial number on the brake bridge ??? Never seen that before :-\
:coolsmiley:
-
you been using it as a notepad sid :LolLolLolLol:
-
:4_17_5:
Is that some kind of serial number on the brake bridge ??? Never seen that before :-\
:coolsmiley:
yeah, its 03 - but the serial number is M7H 11386 ???
-
???
:-\
-
Nice job cant wait to see what you do with it!
Question did you give the youngy a slap for doing that to a cali lol
-
Nice job cant wait to see what you do with it!
Question did you give the youngy a slap for doing that to a cali lol
youngy did not do it, its how he got it... but i will slap him anyway. ;D
white with black skyways I think... ;)
-
Good work Sid :daumenhoch:
Is that some kind of serial number on the brake bridge ??? Never seen that before :-\
I have Two Cali's Paul and both of them have a 3 stamped on the brake bridge ;) Im sure Jongoose told me what it meant but I have forgot or just wasn't listening :D
white with black skyways I think... ;)
:shocked: Fook me Sid that's a tame colour combo for one of your builds :D
Looking forward to seeing it done mate :daumenhoch:
-
::) oh yeah - I forgot,
white with black skyways and pink paint splats :P
-
Never had any on both of my Cali's :-\
Wonder if it came on later models ??? mine where an 83 and an 84 i think :D
-
white with black skyways and pink paint splats :P
That's more like it Sid ;D
Seriously though , I reckon Black and White would look cool 8)
Never had any on both of my Cali's :-\
Wonder if it came on later models ??? mine where an 83 and an 84 i think :D
Mine are an 83 and 84 Paul ;) so I guess that rules that out :D
Where's Mr Fett when you need him .... ::)
-
::) Joff - I hope he is finding me some forks... :-\ ;D
-
nice fettleing sid :daumenhoch:
-
::) Joff - I hope he is finding me some forks... :-\ ;D
You have no chance mate :( When I was after some a while back I was at Johns and casually slipped a set under my Jumper only to get caught by the real life mongeese he has patrolling the grounds of mongoose HQ :D
Two lookouts ......
(http://www.radbmx.co.uk/archive/albums/uu6/NORTYFORTY/Mongoosepatrol.jpg)
and Maurice ...... the Head Guard :police:
(http://www.radbmx.co.uk/archive/albums/uu6/NORTYFORTY/Mongoose5316.jpg)
-
:2funny: slack knacker..... :-X
-
Nice work there Si, Hugo is awaiting his royalty check by the way :LolLolLolLol: It is looking better already just hope you can sort some forks will keep an eye out :daumenhoch:
-
Must have missed this thread Sid :-[
Nice work removing the brake mod mate :daumenhoch:
That "03" on the brake bridge........
3 x 84 frames with it stamped
1 x 85 frames with it stamped
1 x 86 frame with NO stamp
so..........
fook knows :LolLolLolLol:
Snav as for your cali's not being stamped mate - you may not have spotted it because on all of mine bar the 85 the stamping is on the underside of the plate ;)
As for what it means........
???
Joff - those 2 guards mate - had to let one of them go......
caught him fondling the NOS grips in the middle of the night ! :shocked:
-
Top bombing that :daumenhoch:
-
white with black skyways I think... ;)
White with Black Skyways eh Si...... :angel: :angel: :angel:
Where's this PM with the painter's number on then bud - want to ring him on monday :coolsmiley:
-
got the frame back from being blasted, it's in really good condition - drop outs are lovely, just going the fettle the rear brake bridge a little and then on the with the powder coat. Going black a reckon ???
Some parts have arrived also.... ;)
(http://www.radbmx.co.uk/archive/albums/ii368/sid1972/Picture003.jpg)
(http://www.radbmx.co.uk/archive/albums/ii368/sid1972/Picture004.jpg)
(http://www.radbmx.co.uk/archive/albums/ii368/sid1972/Picture001.jpg)
(http://www.radbmx.co.uk/archive/albums/ii368/sid1972/Picture002.jpg)
:daumenhoch:
-
Looking good Sid :daumenhoch:
Some nice bits too for the goose 8)
Think I would be tempted to go White frame with the Black tuffs though :-\ .... but what do I know :D
Have you got any forks yet mate ?
-
Nice work Sid, looking forward to seeing it finished whatever colour you decide to paint it ;)
-
::) I keep changing my mind between black and white mate, I just think black will look cool with loads of little white bits, like the: cali pads,pro neck and seat clamp etc.
I have some tange pinch forks coming for it, in chrome - I reckon I may leave them that way with chrome bars to match :-\
Need to sort your stuff out dude also Joff 8)
-
black frame/chrome forks is a top combo
-
Coming along nicely Sid mate :daumenhoch:
-
I'm thinking black with chrome forks and shiney decals from del , thats what i am going for on mine . This is Spens brother by the way , race you to the powder coaters .
-
I'm thinking black with chrome forks and shiney decals from del , thats what i am going for on mine . This is Spens brother by the way , race you to the powder coaters .
alright fella,
next Saturday for mine - only chance I get... loved them bars by the way ;)
-
si,the only way is chrome!!!! :2funny:
-
si,the only way is chrome!!!! :2funny:
chrome is the new camp though.. :-* :2funny:
;)
-
Thats turnin out great , i love to see frames getting saved when theyve been modifed and welded etc . top job.
-
White with black Tuffs Si....... :smitten: :smitten: :smitten: :smitten: :smitten:
Is it at the powder coater's yet then?
Spen :daumenhoch:
ps - nice wheels dude :LolLolLolLol:
-
::) wheeeeeels look 8)...
powder coaters next Saturday Spen - Going for 'Black' mate. :P
-
Why not go for a superchromed black, leary -esque would look mint. :smitten: Believe sbd does it I was thinking of doing the white Torker before i changed it.
-
Why not go for a superchromed black, leary -esque would look mint. :smitten: Believe sbd does it I was thinking of doing the white Torker before i changed it.
sounds lush fella, but I only have a budget of about £30 :-[
:daumenhoch:
-
Why not go for a superchromed black, leary -esque would look mint. :smitten: Believe sbd does it I was thinking of doing the white Torker before i changed it.
What do you mean "Leary-esq"......... it's a Mongoose, so surely you mean Pro-Class-esq :knuppel2: :knuppel2: :knuppel2: :LolLolLolLol:
(http://www.radbmx.co.uk/archive/albums/aa149/Spen69/IMG_1117.jpg)
Black is gonna be awesome Si - can't wait to see it. As for my two "projects".... the 2nd one is taking shape nicely now :smitten: :smitten:
-
Looking forward to seeing I finished Sid. :daumenhoch:
-
Looking forward to seeing I finished Sid. :daumenhoch:
still got your red donuts mate, I was hoping to bring them to berm but I never got. ;)
-
all the way to have this powdered I was saying black, black and black again!
Walked in, said, "do me this in white".. ;)
(http://www.radbmx.co.uk/archive/albums/ii368/sid1972/Picture015.jpg)
(http://www.radbmx.co.uk/archive/albums/ii368/sid1972/Picture013.jpg)
(http://www.radbmx.co.uk/archive/albums/ii368/sid1972/Picture014.jpg)
be gently - she getting there bless her!
;)
-
:4_17_5:
-
Schweeeeeet :daumenhoch:
-
Reckon you made the right choice there Sid :daumenhoch: imo anyway :D
Looking forward to seeing it finished 8)
PS that ain't my fluted post on there is it ???
-
coolio 8)
-
Nice progress Sid :daumenhoch:
-
Walked in, said, "do me this in white".. ;)
Good lad - so you did listen to your uncle Spen then :knuppel2: :knuppel2: :knuppel2: :knuppel2: :2funny:
Looks fookin lush already bud - the clamp's polished up a treat and I suspect you have cleaned those Tuffs as the dirt they had on them last time I had my grubby paws on them is now gone :LolLolLolLol:
Just a set of decals and a few last bits and she's sorted bud :smitten: :smitten:
(http://www.radbmx.co.uk/archive/albums/aa149/Spen69/S4010436.jpg)
(sorry, couldn't resist putting the pic up....)
-
::) yep Spen, I think you and Joff were right regarding the colour. :smitten:
using this plate because of the orange in the decals, looking at your picture above ???
Fitted haro race bars - big thanks to Gaz, for forks and bars :4_17_5:
(http://www.radbmx.co.uk/archive/albums/ii368/sid1972/Picture016.jpg)
(http://www.radbmx.co.uk/archive/albums/ii368/sid1972/Picture017.jpg)
:daumenhoch:
-
Niiiiiiiiiiiiiiiiiiiiiiiiiiccccccccccccccccccccccceeeeeeeeeeeeeeeee >:D :coolsmiley: :coolsmiley: :coolsmiley:
-
been a while - but I'm nearly there..
Before:
(http://www.radbmx.co.uk/archive/albums/ii368/sid1972/Forsaleitems0071.jpg)
After: my rider for this year ;)
(http://www.radbmx.co.uk/archive/albums/ii368/sid1972/Picture008-4.jpg)
I need a head tude decal to finish - please help :'(
Hope you like it..
Sid..
-
great work Sid - nice save and love the colour combo
-
Looks good Sid :daumenhoch:
Looking forward to seeing it at Chester in March 8)