RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: snooze on October 11, 2010, 06:28 PM
-
I have a crack that goes right around my eat post tube right under the seat clamp. I spoke to a guy who says they have to cut off the top and weld a seat clamp to it. does anyone on here know of another way of getting this done in London? I don'r want my seatclamp welded :-\
-
(http://www.radbmx.co.uk/archive/albums/g295/awake_01/DSC01949.jpg)
here it is.
you can see the shim is poking out at the top of the seatpost tube
-
:'(
I had a similar case, had the seat tube replaced and glad I've done it that way. Someone here can surely recommend you a good shop for this in/around London :)
-
There are a couple of good people here that can do that for you, Sawzall springs to mind first (legend at fixing the unfixable) and there are a couple of other posted in the Technical stickies section.
Try sending Phil (Sawzall) a PM to see if he can help :daumenhoch:
-
Thanks for the advice I'll check out these leads, I didn't know you could replace the seat post tube.
I'm new to this site so not so sure how to use it, I had a look for Phil Sawzall's info in the section mentioned but can't seem to find it. Does anyone have any contact details for this man?
Thanks again for the help
-
http://www.radbmx.co.uk/forum/index.php?action=profile;u=155
Or
http://www.nochucknorris.com/ >:D
:daumenhoch:
-
Thanks a lot peter j.
in the meantime I'll wait for Chuck to find me ;)
-
Thanks a lot peter j.
in the meantime I'll wait for Chuck to find me ;)
;D