RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: Macmania on October 14, 2010, 07:40 PM
-
Just to check will a seat post described as 13/16" in diameter fit a standard 22.2mm tube or will I definitely need a shim ? Thanks in advance :daumenhoch: Nath
-
You will need a shim Nath ;)
13/16 is about 20.6mm :daumenhoch:
-
You will need a shim Nath ;)
13/16 is about 20.6mm :daumenhoch:
Ta Joff, thought so ;) Good job i've got one then :D
-
You will need a shim Nath ;)
13/16 is about 20.6mm :daumenhoch:
Ta Joff, thought so ;) Good job i've got one then :D
If you haven't , there's one here http://cgi.ebay.co.uk/Wald-905-Stem-Seat-Post-Reducer-Shim-13-16-7-8-/190358267923?pt=Cycling_Parts_Accessories&hash=item2c523ca813
-
You will need a shim Nath ;)
13/16 is about 20.6mm :daumenhoch:
Ta Joff, thought so ;) Good job i've got one then :D
If you haven't , there's one here http://cgi.ebay.co.uk/Wald-905-Stem-Seat-Post-Reducer-Shim-13-16-7-8-/190358267923?pt=Cycling_Parts_Accessories&hash=item2c523ca813
Ohh no.................not Porkchopzz again, he will think i'm stalking him ;D
-
You will need a shim Nath ;)
13/16 is about 20.6mm :daumenhoch:
Ta Joff, thought so ;) Good job i've got one then :D
If you haven't , there's one here http://cgi.ebay.co.uk/Wald-905-Stem-Seat-Post-Reducer-Shim-13-16-7-8-/190358267923?pt=Cycling_Parts_Accessories&hash=item2c523ca813
Ohh no.................not Porkchopzz again, he will think i'm stalking him ;D
I did think that :LolLolLolLol: