RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: Swivel on November 09, 2010, 05:14 PM
-
Is there a way to get decals off a frame and keep them sort of intact so I can send to Del to trace? let me know, thanks in advance.
Matt :daumenhoch:
-
I use lighter fluid to remove decals safely. It takes a while to remove them without stretching them and also your fingers go white :idiot2:.
-
Sean thanks. So wipe on lighter fluid, leave then peel off slowly?
-
Used a hairdryer a few times Matt ;) ........ It's the only use I have for it now ::)
-
That's a good idea, what heat up then they peel off better?
-
Matt
Heat them with a hairdryer then slowly and carefully peel them off. Take care not to stretch them, but if you do. Before you stick them to anything bung hairdryer on full and heat them again they should shrink back to original shape.
:daumenhoch:
-
That's a good idea, what heat up then they peel off better?
Matt,
Heat them up slowly, get to close with the drtyer and the'll ripple and when you lift them they'll strech...
Nice and Slow fella :daumenhoch:
-
Wicked thanks everyone :4_17_5:
-
Matt,
just heat them as basically the glue melts and they peel off easily. Plonk them on a piece of paper and send to Del.
He done my Nishiki ones like that, they came back perfect.
-
Go careful with heating them, too much heat and they could crease and burn.
-
use a scraper matt :D
LOL :D
Yeah will go easy with the hairdryer, may even have a go at sorting out my hairdoo like this also!
(http://sweetmullett.com/wp-content/uploads/2010/05/mullet-hs.jpg)
:2funny:
-
That is so you Matt.
-
It is mate, mullet here we come lol.
-
I use some special sticker removal stuff a mate of mine swiped from work ;) god knows what it is as the can ain't labelled :LolLolLolLol: not much use I know :2funny: but you can buy the stuff me tinks on the bay :daumenhoch: