RADBMX.CO.UK
BMX General => BMX Chat => Topic started by: gobshite on November 24, 2010, 10:08 AM
-
i took these updated shots for the rad rides project,
i've done tinkering with this now as its pretty much where i wanted it to be,
i'm going to concentrate on the Ti barcode,
as always building these bikes helps as a distraction from my psychosis,
something to focus on i guess,
anyways, its my rider
frame - Terrible One custom for paul buchanan, front end is a moodyhick rear end from a ruben, "21.5 top tube
fork - s&m race fork
bras - T1 "8.25
stem - battered and polished s&m redneck xlt with Ti bolts
headset - campagnolo chorus - polished - carbon/polished spacers - Ti topcap bolt
crank - profile race - Ti axle and Ti bolts - polished spacers
c/wheel - s&m tuffman polished - Ti timing bolt
pedals - s&m 101
chain - kmc 710sl ti-nitride
seat - s&m slim
post - thomson - polished
clamp - RNC Ti
brake - ad999 - polished - Ti bolts - Ti springs
pads - heatsink - polished - B6 Ti nuts
hanger - onza chillpill - polished - mother of pearl inlaid
lever - odyssey trigger - chrome - Ti bolts
cable - nokon konkavex - polished
barends - x-lite - Ti bolts
f/wheel - chris king - B6 Ti bolts - sun rhyno lite
r/wheel - profile SS cassette - Ti axle - Ti nuts - Ti spokes - sun bfr
tyres - primo dirt&V-monster
grips - odi longernecks
(http://www.radbmx.co.uk/archive/albums/g171/jarvicseven/DSC01963.jpg)
(http://www.radbmx.co.uk/archive/albums/g171/jarvicseven/DSC01965.jpg)
(http://www.radbmx.co.uk/archive/albums/g171/jarvicseven/DSC01936.jpg)
(http://www.radbmx.co.uk/archive/albums/g171/jarvicseven/DSC01950.jpg)
(http://www.radbmx.co.uk/archive/albums/g171/jarvicseven/DSC01958.jpg)
(http://www.radbmx.co.uk/archive/albums/g171/jarvicseven/DSC01955.jpg)
(http://www.radbmx.co.uk/archive/albums/g171/jarvicseven/DSC01959.jpg)
(http://www.radbmx.co.uk/archive/albums/g171/jarvicseven/DSC01954.jpg)
(http://www.radbmx.co.uk/archive/albums/g171/jarvicseven/DSC01968.jpg)
(http://www.radbmx.co.uk/archive/albums/g171/jarvicseven/DSC01967.jpg)
(http://www.radbmx.co.uk/archive/albums/g171/jarvicseven/DSC01928.jpg)
what do you dudes think?
has anyone else on here got something in the rad rides project?
-
have you battered the stem ?.
-
I really like that too, got loads of character :daumenhoch:
-
I'm feeling this build, I love the Rat Look, nice & moody :daumenhoch:
-
Hard as nails... >:D
Wheres THE T1 we've been waiting for?
-
rad rides is a bmx book about to drop,
stem was aŁ5 ebaybargain that some pissflap tried to strip with a bastard file, i batterted it for an hour or so and then polished the fook out of it, when i find a decent engraver it'll have some flowers on the polished bits,
THAT T1 is my last project, i'm stretching it out..... :-[
thanks for the kind comments! :-*
-
I always love your bikes Joe. They have the right mix of rider, but still looking great. :daumenhoch:
-
Its a work of art Joe :4_17_5: love the bling of the Kings, chain and profiles etc against the raw frame. Keep the psychosis, its what makes us unique. Don't stop brother.
-
fantastic ride joe,looks a proper beast,i have 5 in rad rides .
-
I keep coming back time and time again to look at this, beautiful Joe :smitten:
Dingo
-
great bike as per norm joe i also love ure builds aswell as that wall
wish i didnt sell my 20 now as getting the urge to ride again
-
Lovin the polished and chrome against the rusty raw :angel: >:D
:coolsmiley: :coolsmiley: :coolsmiley: :coolsmiley: :coolsmiley:
-
that is an awesome build fella.....
ticks all the boxes for me! :4_17_5:
-
:daumenhoch:
Love the 2face stem
(http://www.radbmx.co.uk/archive/albums/ac78/pmpsa/twoface.jpg)
-
thank you very much,
maybe something about it reflects my slightly schizoid personality,
nice as fook and a complete cnut at the same time,
the rust and the shiney alloy,
the battered/polished stem,
"2face"
rad,
cheers again,
check it out on CycleExif next week... :-*
-
Needs a Yellow powder coat and some skyways 8)
-
I like the contrasts of raw/rust v the polished minty stuff :daumenhoch:
What does she ride like Joe?
-
stem would look cool all done like that.
lovin the whole bike
-
NICE..................
-
I like that it looks good, but then all your builds do :4_17_5:
-
very nice :)
-
Likin' that Joe :daumenhoch:
-
thank you again for all the comments...
heres the Exif link
http://www.cycleexif.com/
-
Rusty tat, seat needs to go up and the bars foward ;)
-
Rusty tat, seat needs to go up and the bars foward ;)
;)
-
The stem is Pure Genius 8)
-
keep having to come back for another look :LolLolLolLol:
Dingo
-
Mate, I'm into old school myself but this build looks the bollox.......... very creative :daumenhoch:
-
Looks well good that - just how I have my bike setup to ride too.