RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: Hiro Tonka on December 06, 2010, 05:57 PM
-
I'm going to atempt to respoke some Z rims with some ACS low flange hubs. I've never done this before, can you guys help?
Uncertain which size spokes/nips to buy. I'm just after some normal spokes, can you help and maybe cut and paste a link for some on Ebay that are at the right price.
I don't want to get the wrong ones.
Thanks
-
Nice one, thanks for that.
Just out of interest does anyone know how much it'll cost me to get these done at a bike shop, including spokes?
-
I wouldn't immediately go for 194mm spokes. It mainly depends on what lacing pattern you are going for 3x or 4x.
-
I generally get my spokes from custom riders, they have a good range, never been out of stock on anything i've wanted and sell individually, so you only buy what you need.
They are really helpful too, and usually arrive within 2 days.
-
I wouldn't immediately go for 194mm spokes. It mainly depends on what lacing pattern you are going for 3x or 4x.
very true as most my wheels are laced 3 cross wqhich would be i believe 188mm spokes or 186 with long nipples
-
I think I use 184mm for a 3x lacing on Z-Rims as the rims have a raised section in the middle where the spokes sit.
-
Tell em Gaz
-
ive just done a set with acs large flange hubs and used 184 spokes with a 3x pattern so i wouldnt use these, the other 2 sets ive had done had low flange hubs and 194 spokes with a 3x pattern id be tempted to go with these as they work :D
-
Tell em Gaz
:LolLolLolLol:
-
So Gaz 184 3 cross works well then ( slightly long at the rim tape side or not )
I'm sure when my Z's were done for my Quadangle (4 years ago mind ) they were a bit long and thought maybe 182's next time
I could be wrong , as this was before going to Craig garage for a lobotomy :D
-
So Gaz 184 3 cross works well then ( slightly long at the rim tape side or not )
I'm sure when my Z's were done for my Quadangle (4 years ago mind ) they were a bit long and thought maybe 182's next time
I could be wrong , as this was before going to Craig garage for a lobotomy :D
the spokes are deffo 184, 3x and have gone on large flange acs stoker hubs, they fit just fine my furry lickle squirrell :D
-
Just buy something from this century or at the least from the end of last century and stop fucking around with playdough and odd looking metal :4_17_5:
-
Thanks Gaz
I might just boil some up , all twisty like ,delve my hand into a box of random spokes 181,184, 182, 186's
and drop them off at Fox's cycles
and ask for the hub decals to be lined up facing Mecca
and the valve holes line up exactly 2 degrees west of magnectic north :angel: :D
-
Michael Hutchins time :)
-
Michael Hutchins time :)
Take the wheels down into the shop dungeon to build ::)
and then get the following
One of these
(http://www.radbmx.co.uk/archive/albums/mm306/Pushki77/GimpPigMask.jpg)
and one of these
(http://i569.photobucket.com/albums/ss137/aireeez/doors/Door_Hotel.jpg)
and some of this
(http://i631.photobucket.com/albums/uu33/nutnutretail031/BROWN-1.jpg)
and jack off with a few mouthfuls of these
(http://i38.photobucket.com/albums/e147/lalalagroovy/illegal%20drugs/thjr9pxg-11.jpg)
and it'll be just like being in Sydney hotel room 1997
Then open your eyes ,, the wheels won't be done , and all the customers will have probably left the shop.
But mentally you be in a better place :D ;D
-
You guys really do scare me sometimes ;D
Thanks for "nearly all" your advice
-
Right i,m building up some Araya Aero's 1.75
Onto Suzue small flange hubs
3x
What size of spoke am i too use for these ?
I bought 194mm but i think they are too long :-\
-
You guys really do scare me sometimes ;D
Thanks for "nearly all" your advice
Was gonna have a go at a set of wheels but I'm more confused now than when I started reading the thread :LolLolLolLol: :LolLolLolLol:
-
Right i,m building up some Araya Aero's 1.75
Onto Suzue small flange hubs
3x
What size of spoke am i too use for these ?
I bought 194mm but i think they are too long :-\
i built up those black rims you sold me gaz, 3x on small flange suzue hubs, i used 194 mm on the front but for some reason on the rear they were too long, so ended up using 188mm which worked fine :D
hope this helps :daumenhoch: