RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: rick1970 on February 05, 2011, 08:45 PM
-
hi,got a set of pink dc tech 4 levers i want to strip back to alloy is this possible and what do i need to do ?
any ideas thanks.. :daumenhoch:
-
Oven pride or caustic soda if they're anno. Paint stripper if they're paint.
I think the standard colours are Anno but i'm not sure on pink.
-
pink are painted so nitomors
messy job :-\
-
excelent cheers for that chaps ,was hoping it would be a diy job rather than send away.thanks :daumenhoch: :daumenhoch:
-
it is dity
nitromors from halfords
paint some on ( use gloves ffs )
watch it bubble
scrape it off
-
it is dity
nitromors from halfords
paint some on ( use gloves ffs )
watch it bubble
scrape it off
;D yeh remember me dad using it on dinky cars years ago amazing stuff to watch :LolLolLolLol: cheers pal
-
If your repainting just wet flat them and repaint, no need to remove all the old paint,
-
Gonna play Dad now.......... Wear eye protection!!!!! A couple of yrs ago I stripped an old engineers wooden tool chest. I'd finished. picked up some wire wool I'd used and a blob of stripper flicked up off it straight in to my eye! :shocked: The pain...... 3 weeks later after loads of hospital visits I was told I was lucky not to lose my sight...... Would hate it to happen to anyone else.
-
put them in a tin with nitromores in overnight and watch the magic in the morning :)
-
Gonna play Dad now.......... Wear eye protection!!!!! A couple of yrs ago I stripped an old engineers wooden tool chest. I'd finished. picked up some wire wool I'd used and a blob of stripper flicked up off it straight in to my eye! :shocked: The pain...... 3 weeks later after loads of hospital visits I was told I was lucky not to lose my sight...... Would hate it to happen to anyone else.
ouch!! Goggles it is then in a tin overnight..don't plan on repaint maybe just back to alloy then lacker or polish cheers lads :daumenhoch: