RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: motomagII on March 07, 2011, 07:14 PM

Title: is there such as thing as
Post by: motomagII on March 07, 2011, 07:14 PM: is there such thing as sugino chainring in 36 tooth to fit oild school spider or was 39t the smallest ?
Title: Re: is there such as thing as
Post by: RATTY on March 07, 2011, 07:16 PM: I only remember them going as low as 39T, Nic says stuff like TA cranks went down to a 33T :daumenhoch:
Title: Re: is there such as thing as
Post by: motomagII on March 07, 2011, 07:17 PM: mm was the ta cranks 4 bolt or 5 bolt?
i either need 36t to fit normal spider or 36t to fit 104 bcd 4 bolt spider ?
Title: Re: is there such as thing as
Post by: RATTY on March 07, 2011, 08:44 PM: Nic says they were 5 bolt but didnt take a standard chainring.
Have you tried a specialist Race bike shop?
Title: Re: is there such as thing as
Post by: motomagII on March 07, 2011, 09:11 PM: i can find some about for mtb in the right bcd problem is they are soooo expensive .prokchop do really nice one too but still looking at 30.00 up to 45.00 for a single speed one which to be honest is too much money for me on a chainring.
Title: Re: is there such as thing as
Post by: RATTY on March 07, 2011, 09:24 PM: Would it not be cheaper to put a larger one on the rear Greg?
Title: Re: is there such as thing as
Post by: jT Racing on March 07, 2011, 10:10 PM: got a few small ones around greg. everything is boxed up right now so i cant check straight away.
Title: Re: is there such as thing as
Post by: motomagII on March 08, 2011, 09:59 PM: it would b easierto leve as is with 44t 16 garingbut i wanna ride park ad track with this bike and ned small gearing so i dont catch chainrin on lips ec
Title: Re: is there such as thing as
Post by: dan-dare on March 08, 2011, 10:01 PM: http://cgi.ebay.co.uk/PRO-NECK-37-SPROCKET-BMX-CRUISER-GT-SE-CW-JMC-HARO-ELF-/180634403788?pt=Cycling_Parts_Accessories&hash=item2a0ea643cc
Title: Re: is there such as thing as
Post by: gary4130 on March 08, 2011, 10:11 PM: don't know if sugino did any smaller -but i got a 34t and a 36t both off the bay for about a £5 ,was a while ago though
Title: Re: is there such as thing as
Post by: bof on March 08, 2011, 10:12 PM: http://www.chainreactioncycles.com/Models.aspx'modelID=28729
Title: Re: is there such as thing as
Post by: hunterdubber on March 08, 2011, 10:17 PM: Quote from: motomagII on March 08, 2011, 09:59 PM
it would b easierto leve as is with 44t 16 garingbut i wanna ride park ad track with this bike and ned small gearing so i dont catch chainrin on lips ec

Greg everyone was riding 44/16 in the parks and ramps till about 2002 ish

I and all the others were doing drop ins riding the ramps at Ramp city on old school bikes with 44t in January 2011 without problems

although I do also have 25/9 on my N/S ride

It's not essential is it , sometimes it's good to be different

Diggler's park/trails ride (DIRTBIKE 28lbs +) has 44/16 and he does just fine , he's sold his new school park bike :)

No need to catch your chainring ???
Title: Re: is there such as thing as
Post by: oldtired on March 08, 2011, 10:57 PM: been up the track today and had a blast in the bowl on the MCS no catchy ringy for me, 44/16 you just ride in at a slightly shalower angle, and a bit faster, scares the shite out of ya :daumenhoch: