RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: jasbadboy on March 07, 2011, 10:54 PM

Title: Redline Flight and Sugino
Post by: jasbadboy on March 07, 2011, 10:54 PM

Hi can anyone tell me if i can fit a sugino spider onto a single pinch redline flight crank?
I did read somewhere about an adapter.

Cheers

Title: Re: Redline Flight and Sugino
Post by: brettypeeps on March 07, 2011, 11:02 PM

That is right you need a top hat washer :daumenhoch:

Title: Re: Redline Flight and Sugino
Post by: jasbadboy on March 07, 2011, 11:05 PM

Is this a custom part?

Title: Re: Redline Flight and Sugino
Post by: HEYWOOD BMX on March 07, 2011, 11:42 PM

http://www.bmxcity.co.uk/product_info.php?products_id=2390

 Prob need 23.8mm down to 19mm

Title: Re: Redline Flight and Sugino
Post by: kuwahero on March 07, 2011, 11:47 PM

in my experience though you will need to file down the width of the top hat though. they are generally wider than the width of the spider.

Title: Re: Redline Flight and Sugino
Post by: 58 delray on March 08, 2011, 09:38 AM

Quote from: kuwahero on March 07, 2011, 11:47 PM

in my experience though you will need to file down the width of the top hat though. they are generally wider than the width of the spider.

you can get them in different depths, you need the shallow one oras Marc says file it down.
if you use the deeper one the spyder will wobble around on the spindle  :daumenhoch: