RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: adenough on March 19, 2011, 10:41 PM

Title: HOME MADE BEARING CUP PRESS.....
Post by: adenough on March 19, 2011, 10:41 PM: (http://www.radbmx.co.uk/archive/albums/bb199/adenough/BILD1314.jpg)

ONE SET OF 8 MM THICK WASHERS FREE TO A GOOD HOME!!! BOTH AMERICAN AND EURO BB SIZE :)
Title: Re: HOME MADE BEARING CUP PRESS.....
Post by: HEYWOOD BMX on March 19, 2011, 11:16 PM: :) Very good but if you try and press in a Euro BB you`ll fook it and the frame :daumenhoch:
Title: Re: HOME MADE BEARING CUP PRESS.....
Post by: adenough on March 20, 2011, 01:04 AM: how?
Title: Re: HOME MADE BEARING CUP PRESS.....
Post by: brettypeeps on March 20, 2011, 01:06 AM: Euro are screw in aren't they
Title: Re: HOME MADE BEARING CUP PRESS.....
Post by: gary4130 on March 20, 2011, 08:46 AM: i'll have a a set of each ,fog :daumenhoch:
Quote from: VOIVOD on March 19, 2011, 11:16 PM
:) Very good but if you try and press in a Euro BB you`ll fook it and the frame :daumenhoch:
will be ok for spanish or mid :-\
Title: Re: HOME MADE BEARING CUP PRESS.....
Post by: adenough on March 21, 2011, 12:54 PM: Quote from: gary4130 on March 20, 2011, 08:46 AM
i'll have a a set of each ,fog :daumenhoch:
Quote from: VOIVOD on March 19, 2011, 11:16 PM
:) Very good but if you try and press in a Euro BB you`ll fook it and the frame :daumenhoch:
will be ok for spanish or mid :-\
hi mate, ive got one small and one big left, still do the trick tho, send me ur addy by pm, cheers :daumenhoch:
Title: Re: HOME MADE BEARING CUP PRESS.....
Post by: adenough on March 21, 2011, 12:54 PM: Quote from: brettypeeps on March 20, 2011, 01:06 AM
Euro are screw in aren't they
oops, my mistake :daumenhoch:
Title: Re: HOME MADE BEARING CUP PRESS.....
Post by: adenough on March 21, 2011, 12:55 PM: off to work in a mo, be back at 12 ish, i can reply then :daumenhoch:
Title: Re: HOME MADE BEARING CUP PRESS.....
Post by: Dr.Robotnik on March 21, 2011, 12:59 PM: Are these still available? I'd like to give them a go please.
Title: Re: HOME MADE BEARING CUP PRESS.....
Post by: brettypeeps on March 21, 2011, 02:13 PM: What size bolt are they I need one below 19mm for redlines :4_17_5:
Title: Re: HOME MADE BEARING CUP PRESS.....
Post by: Clean on March 21, 2011, 08:31 PM: Quote from: brettypeeps on March 21, 2011, 02:13 PM
What size bolt are they I need one below 19mm for redlines :4_17_5:

Brett,

I believe they are 20mm; got me a pair on order... going to need all of the help I can get! ;D

Big thanks to adenough! :daumenhoch:

Clean. :coolsmiley:
Title: Re: HOME MADE BEARING CUP PRESS.....
Post by: brettypeeps on March 21, 2011, 08:35 PM: Quote from: Clean on March 21, 2011, 08:31 PM
Quote from: brettypeeps on March 21, 2011, 02:13 PM
What size bolt are they I need one below 19mm for redlines :4_17_5:

Brett,

I believe they are 20mm; got me a pair on order... going to need all of the help I can get! ;D

Big thanks to adenough! :daumenhoch:

Clean. :coolsmiley:
[/quote

Negative Richard they are nineteen mm on Redline Cranks :daumenhoch:
Title: Re: HOME MADE BEARING CUP PRESS.....
Post by: Clean on March 21, 2011, 08:54 PM: Brett,

Not questioning the size of the Redline Cranks.... I think the design of Adenough's thingamajig is 20mm? ???

However with the current level of my technical knowledge and experience I would take that with a large bowlful of salt! :uglystupid2:

Clean. :coolsmiley:
Title: Re: HOME MADE BEARING CUP PRESS.....
Post by: brettypeeps on March 21, 2011, 09:14 PM: Quote from: Clean on March 21, 2011, 08:54 PM
Brett,

Not questioning the size of the Redline Cranks.... I think the design of Adenough's thingamajig is 20mm? ???

However with the current level of my technical knowledge and experience I would take that with a large bowlful of salt! :uglystupid2:

Clean. :coolsmiley:
;D 8) :daumenhoch: