RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: skki3330 on March 21, 2011, 07:38 PM

Title: Thread pitch for Tuffs?
Post by: skki3330 on March 21, 2011, 07:38 PM

Guys this has prob been asked many timez but what thread pitch do i need for Skyway Tuffs?

Cheers

Title: Re: Thread pitch for Tuffs?
Post by: brettypeeps on March 21, 2011, 07:43 PM

How old are the tuffs. Could be 24 tpi or 26. Or even both are they sealed bearing type. If so does the axle have flats on it

Title: Re: Thread pitch for Tuffs?
Post by: skki3330 on March 21, 2011, 07:47 PM

Metal hub tuffs mate pat no 4280736. Flats on the front but not the back??

Title: Re: Thread pitch for Tuffs?
Post by: brettypeeps on March 21, 2011, 08:01 PM

They should be 24 tpi if the are they skyway axles. I would take the front axle out and lay it on the back to make sure the threads are the same pitch. If they don't intertwine then you have 1of each thread type :daumenhoch:

Title: Re: Thread pitch for Tuffs?
Post by: skki3330 on March 21, 2011, 08:09 PM

Cheers mate you have ben a great help  :daumenhoch: