RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: griff on March 29, 2011, 11:05 PM

Title: ano removal question - araya aeros/suntour hubs
Post by: griff on March 29, 2011, 11:05 PM
anyone know if the oven pride trick works ok on these?
wasn't sure if they were hard ano or not (and whether that makes any difference)

thenk you please
Title: Re: ano removal question - araya aeros/suntour hubs
Post by: HUTCHMAN on March 29, 2011, 11:09 PM
oven pride should do the trick.   :daumenhoch:  btw MIGHT have a black,tuff neck style seat clamp for you as well!!
Title: Re: ano removal question - araya aeros/suntour hubs
Post by: sid1972 on March 29, 2011, 11:12 PM
Oven pride works mate, but I use caustic soda which is the agent in oven pride that does the stripping. You can get it from most chemist, b&q etc.

Just do it outside with gloves and googles and don't stand there breathing in the vapour!  ;)

my thread on polishing rims shows the process.

Less hassle is to take them to a powder coater and get them 'aqua blastered', they guy I use charges £10 for 2 rims - lot less bother but not as much fun!

Enjoy!
Title: Re: ano removal question - araya aeros/suntour hubs
Post by: griff on March 29, 2011, 11:18 PM
oven pride should do the trick.   :daumenhoch:  btw MIGHT have a black,tuff neck style seat clamp for you as well!!

Dave you're too much - I should just bring that frame back round yours and let you build it  :2funny:

(well I will be knocking your door no doubt when it's time to fit the beartrap headset that's going on it  ::) :-[)

Oven pride works mate, but I use caustic soda which is the agent in oven pride that does the stripping. You can get it from most chemist, b&q etc.

Just do it outside with gloves and googles and don't stand there breathing in the vapour!  ;)

my thread on polishing rims shows the process.

Less hassle is to take them to a powder coater and get them 'aqua blastered', they guy I use charges £10 for 2 rims - lot less bother but not as much fun!

Enjoy!

thought the rims would be ok - hubs too?
ones I'm looking at are wrong colour for my build (& probably will go over budget ) but just in case.....


Title: Re: ano removal question - araya aeros/suntour hubs
Post by: HUTCHMAN on March 29, 2011, 11:21 PM
yea,headset's no prob!! :daumenhoch:
Title: Re: ano removal question - araya aeros/suntour hubs
Post by: griff on March 29, 2011, 11:28 PM
yea,headset's no prob!! :daumenhoch:

nice one  :4_17_5: hopefully will have the rust off the frame by the time I pick the headset up  :daumenhoch:
Title: Re: ano removal question - araya aeros/suntour hubs
Post by: john4130 on March 29, 2011, 11:30 PM
i used caustic soda to strip my rims last week, in my shed with the door closed and no gloves or goggles while smoking a fag. got a great hit of it. :daumenhoch:
Title: Re: ano removal question - araya aeros/suntour hubs
Post by: griff on March 29, 2011, 11:37 PM
impressive, now if you had somehow introduced a cat/brand new quilt cover into the mix that could have netted you a prize  :4_17_5:
Title: Re: ano removal question - araya aeros/suntour hubs
Post by: griff on March 30, 2011, 12:11 AM
meh - had a cheeky bid for some at last minute, but missed em  ::)
gonna keep my eyes out for a bargain... thanks guys for your help anyway  :daumenhoch:
SimplePortal 2.3.5 © 2008-2012, SimplePortal