RADBMX.CO.UK
New School BMX 2004 - Now => New School Racing => Topic started by: motomagII on May 22, 2011, 03:39 PM
-
guys just got new schopol cruiser and it feels a bit odd
bars are 26 by 5.5 and feel all wrong shape etc.
is there set cruiser bars that are same shape as normal bars in 6 inch rise please 28 wide is good
also whats the gearing most use on track its got 39x17 at moment
-
Gregster 39 x 17 is bang on, same as 44:16 on a 20".
A lot of proper cruiser bars are about 6 inch high and about 27 - 27.5 inches wide. Cruiser slams are nice, as are Fly Joey Bradford cruiser bars. There's a few cruiser bars around about 25.5" (too narrow) and also have too much back-sweep.
-
keep your eyes open for me john . :daumenhoch:
-
would alloy bars be bad idea fly racing do some bars from 3 inch to 6.5 inch rise sounds good
-
would alloy bars be bad idea fly racing do some bars from 3 inch to 6.5 inch rise sounds good
If you're doing any gating/jumping/manualling and hard riding I'd suggest not using aloominum bars based on my past experience (snapped CW cruisers bars on the gate). Unless NS aloominum bars are a heck of a lot stronger?
-
mmm struggling to fnd owt thats 6.00 or 6.5 rise john
may have to settle for 5.5 or 5.75 i like tall bars
-
if your wanting tall bars greg you will have to buy old school bars
-
Spacers underneath and a top-loading stem would give you more height.
-
Greg, I would immediately email Chris Moeller directly and tell him that his 5.75 race cruiser bars are the wrong size, demand a 6.5 set be made tomorrow and sent for free to compensate you for your inconvenience and rising stress levels as a result of him not already producing them.
The bars that came on the Fit CR24 had a 6"+ rise if I remember correctly :daumenhoch:
-
I use S&M Gay bars on my Floval, widened to 29" :daumenhoch:
Dingo
-
Greg, I would immediately email Chris Moeller directly and tell him that his 5.75 race cruiser bars are the wrong size, demand a 6.5 set be made tomorrow and sent for free to compensate you for your inconvenience and rising stress levels as a result of him not already producing them.
The bars that came on the Fit CR24 had a 6"+ rise if I remember correctly :daumenhoch:
:knuppel2: :knuppel2: :knuppel2:
theres few completes with high cruiser bars just gotta find someone who has pair for sale (they probably changed em back to lower height ones lol)
i got top load stem and maximum spacers under stem .the stem is too long reach too but hey ho
-
try Diesel on here Greg, he has a 2011 OM Flyer and I think he swapped the bars out on it or Gish has some 6"x27" GT ones here
http://www.radbmx.co.uk/forum/index.php'topic=126931.0
Dingo