RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: Gnarlyscoots on August 08, 2011, 07:46 PM

Title: Schwinn Freeform build **FINISHED**
Post by: Gnarlyscoots on August 08, 2011, 07:46 PM
Well guys, this is not going to be built to factory spec, far from it. It is chrome and was powdered over the top. Powder was removed and the f+f polished  :daumenhoch: It's not 100% percent but I'm not worried as I will be riding the shit out of it  :2funny:

I will be building it in the 2 old school anno colours of Red and Gold (and some polished parts too, all my spare junk and more  :LolLolLolLol:  :daumenhoch: )

I have now fitted the old Tange headset from my Haro and Tange locking nut. Pics will be added as we go along so any input is cool   :daumenhoch:

Cable runs through the potts mod, down the forks tube and out the left fork for a front freestyle caliper  :coolsmiley:

(http://i1084.photobucket.com/albums/j406/Londonhellboy/Photo0450.jpg)

Polished and Headset fitted

(http://i1084.photobucket.com/albums/j406/Londonhellboy/Photo0449.jpg)
Title: Re: Schwinn Freeform build **UPDATED 08.08.2011**
Post by: Gnarlyscoots on August 08, 2011, 07:47 PM
Eastern gold anno BB and MX gold anno clamp fitted  :daumenhoch:

(http://i1084.photobucket.com/albums/j406/Londonhellboy/Photo0452.jpg)
Title: Re: Schwinn Freeform build **UPDATED 08.08.2011**
Post by: Gnarlyscoots on August 08, 2011, 07:48 PM
NOS gold anno Sugino 40T chainring, Sugino Spider and near mint Sugino bolt set plus twin bolt Redline 180's fitted  :smitten:  :daumenhoch: (Ignore the Skyway guys, got something special for this  :yahoo_silent: )

(http://i1084.photobucket.com/albums/j406/Londonhellboy/Photo0453.jpg)

Dia Compe 750 rear caliper (re-issue but hey, the only difference is the retaining nuts are allen key bolts, and the date) for under the frame fitment fitted  :coolsmiley:  :daumenhoch:

(http://i1084.photobucket.com/albums/j406/Londonhellboy/Photo0454.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Photo0455.jpg)
Title: Re: Schwinn Freeform build **UPDATED 08.08.2011**
Post by: Gnarlyscoots on August 08, 2011, 07:48 PM
I got these babies for it  :daumenhoch: Got to strip down, clean the rims, polish the sweet looking HF ACS gold anno hubs and re-lace with some S/Steel double butted HKS spokes  :daumenhoch:

(http://i1084.photobucket.com/albums/j406/Londonhellboy/Photo0423.jpg)
Title: Re: Schwinn Freeform build **UPDATED 08.08.2011**
Post by: Gnarlyscoots on August 08, 2011, 07:49 PM
Original Elina UL chequered layback post and red Elina Flyte Tech fitted  :smitten:

(http://i1084.photobucket.com/albums/j406/Londonhellboy/Photo0460.jpg)
Title: Re: Schwinn Freeform build **UPDATED 08.08.2011**
Post by: Gnarlyscoots on August 08, 2011, 07:49 PM
Put the red Skyways on for now dudes as it looked pants with balck  :LolLolLolLol: and my B E A U T I F U L    ACS 55 slant turned up today  :smitten:  :smitten:  :smitten:

And NOS gold ACS seatclamp replaced the MX gold clamp  :daumenhoch:

(http://i1084.photobucket.com/albums/j406/Londonhellboy/Photo0472.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Photo0473.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Photo0474.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Photo0475.jpg)

Think i'm going to run it without a rotor though  :daumenhoch:

Bars are down the postie's as the nooby from the states didn't post it like I asked so it has acrued a fookin' customs charge of £8  :tickedoff:  :knuppel2:  :2gunsfiring_v1:
Title: Re: Schwinn Freeform build **UPDATED 08.08.2011**
Post by: Gnarlyscoots on August 08, 2011, 07:50 PM
Without the rotor  :smitten:

(http://i1084.photobucket.com/albums/j406/Londonhellboy/Photo0476.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Photo0477.jpg)
Title: Re: Schwinn Freeform build **FINISHED**
Post by: Gnarlyscoots on August 08, 2011, 07:50 PM
Pretzel's collected, polished and fitted with SM mushy's  :daumenhoch:

Starting to look like a bike now  :LolLolLolLol:

Come on spokes, Z's to do and get on, eh Bendy  :LolLolLolLol:

(http://i1084.photobucket.com/albums/j406/Londonhellboy/Photo0481.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Photo0482.jpg)
Title: Re: Schwinn Freeform build **FINISHED**
Post by: Gnarlyscoots on August 08, 2011, 07:51 PM
Z rims re-laced and true'd  :smitten:

(http://i1084.photobucket.com/albums/j406/Londonhellboy/Photo0492.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Photo0493.jpg)

Now guys, what tyres shall I put on ??

I have red Panaracers ??  Too much  ??

Any ideas is cool  :daumenhoch:
Title: Re: Schwinn Freeform build **FINISHED**
Post by: Gnarlyscoots on August 08, 2011, 07:51 PM
Rhubarb and Custard ?? ?? ??

(http://i1084.photobucket.com/albums/j406/Londonhellboy/Photo0496.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Photo0498.jpg)
Title: Re: Schwinn Freeform build **FINISHED AT LAST**
Post by: Gnarlyscoots on August 08, 2011, 07:53 PM
Today guys, I have fitted a polished NOS Dia Compe Tech 6 locking lever with red Sharp lever cover for the back brake and a Gold KMC chain. I was going to fit my NOS Red and Chrome Izumi but have decided to save that for my Dp re-furb, Hmmm...........and Gold Shimano SX peds. Still hunting for decals from the states  :crazy2:

I have also fitted some yellow dice valve caps  :2funny: and a yellow savage cable and yellow Eagle II pads are in the post  :daumenhoch: Not sure if I will fit a front setup yet, I will see when the rest is done  :-\

Pics now added, hope you like :daumenhoch:

(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8080087.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8080079.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8080081.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8080080.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8080083.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8080085.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8080089.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8080086.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8080082.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8080090.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8080088.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8080076.jpg)

What ya reckon so far guys ??
Title: Re: Schwinn Freeform build **UPDATED 08.08.2011**
Post by: AKGOFF on August 08, 2011, 07:59 PM
Looking sweet Tel, despite my earlier reservations :daumenhoch:
Title: Re: Schwinn Freeform build **UPDATED 08.08.2011**
Post by: Jaymz on August 08, 2011, 07:59 PM
Its crazy looking, i like, but i think you should go for a front brake set up as well as its a freestyler
Title: Re: Schwinn Freeform build **Finished**
Post by: Gnarlyscoots on August 08, 2011, 08:05 PM
Yer I know dude but it looks cool with just the one setup  :LolLolLolLol: I got the matching lever, Sharp lever cover, yellow savage cable and Mr Spen is sending me a polished 880 caliper for the front and a gold Tange Headlock  :daumenhoch: Eagle II's in the post (2 sets)
Title: Re: Schwinn Freeform build **FINISHED**
Post by: Gnarlyscoots on August 08, 2011, 08:09 PM
Looking sweet Tel, despite my earlier reservations :daumenhoch:
Cheers Bro  :daumenhoch: I will let you have a ride on the 4th Sept  :-*
Title: Re: Schwinn Freeform build **UPDATED 08.08.2011**
Post by: Spen69 on August 08, 2011, 10:26 PM
Love it Terry, red and gold looks ace on a chrome bike :daumenhoch:

Polished 880 and the gold headlock are gonna lok the bollox on it bro - I'll get them to you once I've swapped all the bolts over to make sure it's a minter buddy :daumenhoch:
Title: Re: Schwinn Freeform build **FINISHED**
Post by: Gnarlyscoots on August 17, 2011, 02:16 PM
Thanx to a trade off with the Spenster, front polished 880, gold Tange headlock, DC polished Tech 6 with red lever cover and yellow savage cable now fitted to the front (and fook me guys, running that cable through the fork was fookin' hard work  :crazy2: )  :daumenhoch:

(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8160088.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8160085.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8160091.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8160089.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8160092.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8160093.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8160090.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8160086.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8160087.jpg)
(http://i1084.photobucket.com/albums/j406/Londonhellboy/Predator%20Freeform/P8160084.jpg)


Hope you all like and you will get to see it on the 4th Sept  :daumenhoch:
Title: Re: Schwinn Freeform build **FINISHED**
Post by: Jaymz on August 17, 2011, 02:51 PM
 :4_17_5: :4_17_5: :4_17_5: :4_17_5: :4_17_5: sweet as, really came together, and you went with the front brake as well, looks great
Title: Re: Schwinn Freeform build **FINISHED**
Post by: mattuknc on August 17, 2011, 03:02 PM
Well done mate, that does look the business.  :daumenhoch:
Title: Re: Schwinn Freeform build **FINISHED**
Post by: brettypeeps on August 17, 2011, 03:09 PM
great fusion of colours with awesome results :smitten:
Title: Re: Schwinn Freeform build **FINISHED**
Post by: AKGOFF on August 17, 2011, 06:03 PM
great fusion of colours with awesome results :smitten:

Couldn't agree more, the colours work superbly. Good work Tel, see ya on the 4th :daumenhoch:

Adam
Title: Re: Schwinn Freeform build **FINISHED**
Post by: Gnarlyscoots on August 18, 2011, 02:50 AM
Thanks guys  :daumenhoch: Appreciated  :-*

Just wish I could get hold of some decals for it  :(
Title: Re: Schwinn Freeform build **FINISHED**
Post by: Taipan on August 18, 2011, 11:08 AM
I think it needs some f+f decals? do you know what they look like? like it tho :daumenhoch:
Title: Re: Schwinn Freeform build **FINISHED**
Post by: curtispro on August 18, 2011, 11:26 AM
Looking very nice and very different Terry, I will have a closer look on the 4th and just hope the sun is shining  :daumenhoch:
Title: Re: Schwinn Freeform build **FINISHED**
Post by: Gnarlyscoots on August 18, 2011, 11:47 AM
Yer, I know what the decals look like and I have been trying to get hold of some through the Museum but to no avail  :( They seem to be very ellusive  :LolLolLolLol:

I have even put in a request to get someone to take a set off and I will get them reproduced and supply them with a couple of sets  :LolLolLolLol:

Oh well, the search goes on  :-\
Title: Re: Schwinn Freeform build **FINISHED**
Post by: 58 delray on August 18, 2011, 12:23 PM
didn't think i was gonna like this but i was wrong, nice build  :daumenhoch:
Title: Re: Schwinn Freeform build **FINISHED**
Post by: Gnarlyscoots on August 24, 2011, 01:51 AM
Cheers dude  :daumenhoch: She rides proper nice too  :coolsmiley:
Title: Re: Schwinn Freeform build **FINISHED**
Post by: Gnarlyscoots on August 30, 2011, 01:37 AM
Guys, I been doing some serious hunting for a decal set for this baby but just cannot find them. If anyone has the contacts, know how or even has a set, could they please advise me  :'(

It's all I need to finish it  :-\

Any help would be appreciated  :daumenhoch:

It is a 1987 SCHWINN PREDATOR FREEFORM EX

Heres a pic of one:-

(http://i1084.photobucket.com/albums/j406/Londonhellboy/2579229254_6d1c48c816_b.jpg)
Title: Re: Schwinn Freeform build **FINISHED**
Post by: fischflo on August 30, 2011, 08:27 PM
wow; that one's real nice, too  :D

did ya ask 'Lord Decal' Del yet?
Title: Re: Schwinn Freeform build **FINISHED**
Post by: Gnarlyscoots on August 30, 2011, 08:53 PM
Yer it's sweet too dude  :coolsmiley: Getting right into the Schwinn movement at the moment  :daumenhoch:

Del can only do decals that he has a template for and does not have these in his collection  :-\

So....still looking and hoping  :(
Title: Re: Schwinn Freeform build **FINISHED**
Post by: WINI on August 30, 2011, 08:59 PM
Sweet Terry, I'm liking this frameset  :daumenhoch:
Title: Re: Schwinn Freeform build **FINISHED**
Post by: fischflo on August 30, 2011, 11:14 PM
shit, seems like hens teeth this set....

but for a start --if nothing else shows up on this-- , you could drop bmxtilldeath over on bmxmuseum (http://bmxmuseum.com/user/8586) a line-- he was looking for those stickers a couple of months ago, he might know something  :(

let me have another looky....
Title: Re: Schwinn Freeform build **FINISHED**
Post by: brakedancer on August 30, 2011, 11:27 PM
that bike looks the T I T S  !!!!!     8) 8)  nice one fella  :daumenhoch:
Title: Re: Schwinn Freeform build **FINISHED**
Post by: fischflo on August 31, 2011, 12:59 AM
check out this thread http://bmxmuseum.com/forums/viewtopic.php?id=194121

freeform ex full set jpegs, but seems slighty different with the dashes --yours are blue above the r's, these yellow and magenta ...?  >:(
Title: Re: Schwinn Freeform build **FINISHED**
Post by: Gnarlyscoots on August 31, 2011, 01:21 AM
Nice one dude  :daumenhoch: Gonna plod this along to Del  :coolsmiley:
Title: Re: Schwinn Freeform build **FINISHED**
Post by: fischflo on August 31, 2011, 02:00 AM
(http://www.radbmx.co.uk/archive/albums/v521/fischflo/Nacktmull.jpg)
SimplePortal 2.3.5 © 2008-2012, SimplePortal