RADBMX.CO.UK
Cupid Stunt Bike of the Month/Year => Past Entries => Cupid Stunt Bike of the Month/Bike of the Year => 2011 => Topic started by: pickle on September 12, 2011, 06:32 PM
-
bang em up, four pictures and description if you want to :daumenhoch:
-
Here goes.
My very first build. Tried to keep it era correct with a sensible budget. Hope you like it.
Cheers :daumenhoch:
Julian
Skyway TA (84) frame and forks
GT PRO bars
Amé Round bubble font
Skyway Tuff II – alloy hub
Tioga Comp 3 (re-issue)
Suntour Power Stem
Beartrap 2 headset
SST dirt skirt
Tange SC2 seat clamp
Odyssey lay back (GT decal)
Kashimax Aero
Dia-compe 901, Tech 4 lever & DC cable
Sugino OPC
Sugino spider
Sugino chain ring 44t
Tange BB
Shimano SX pedals
Izumi chain
Cal lite pads (repop)
Dropout savers (Made by cuckoo)
(http://i1116.photobucket.com/albums/k575/julianclark347/Skyway%20BOTM/f9932e31.jpg)
(http://i1116.photobucket.com/albums/k575/julianclark347/Skyway%20BOTM/ba6fbc48.jpg)
(http://i1116.photobucket.com/albums/k575/julianclark347/Skyway%20BOTM/f2e4e04b.jpg)
(http://i1116.photobucket.com/albums/k575/julianclark347/Skyway%20BOTM/d7421bd1.jpg)
-
1984 JMC SHADOW
jmc shadow f&f
gt pro bars
pro neck stem
oakley b2 grips
tioga beartrap II headset
uni pro seat/post combo
tange b/b
NOS tioga task force opc
NOS tuf neck powerdisc
NOS pro neck chainring 44t
sugino chainring bolts
suntour xc II pedals
ybn black/chrome chain
dc mx 900 caliper/ dc blocks
dc tech 3 lever
dc brake cable (85)
NOS black arayas 1.5's
NOS suzue hubs
comp III tyres
jmc padset
(http://www.radbmx.co.uk/archive/albums/ae76/gish_2010/009-2.jpg)
(http://www.radbmx.co.uk/archive/albums/ae76/gish_2010/010-2.jpg)
(http://www.radbmx.co.uk/archive/albums/ae76/gish_2010/011-1.jpg)
(http://www.radbmx.co.uk/archive/albums/ae76/gish_2010/012-1.jpg)
-
Early 80s Ripper frame,
Stamped LGs
Ame cams
Champion expert bars
Pro Neck stem
Tange Seiki headset
Ayaya 7x rims on h/f Sunshine hubs
Kashimax aero seeat
Hutch bear traps not repops
Takagi Tourney cranks
DC 1020 calipers
DC pre bend levers
Yellow label comp 3s
Hope you like :)
(http://www.radbmx.co.uk/archive/albums/vv191/stevochb/DSCF0199.jpg)
(http://www.radbmx.co.uk/archive/albums/vv191/stevochb/DSCF0200.jpg)
(http://www.radbmx.co.uk/archive/albums/vv191/stevochb/DSCF0201.jpg)
(http://www.radbmx.co.uk/archive/albums/vv191/stevochb/DSCF0203.jpg)
-
1984 Chrome Rickman freestyler
Exact replica of the bike i had BITD that was sadly stolen in 87.
Link to resto thread here http://www.radbmx.co.uk/forum/index.php'topic=132415.0
Some pics
(http://www.radbmx.co.uk/archive/albums/oo68/bigfatolly/rickmanfs002.jpg)
(http://www.radbmx.co.uk/archive/albums/oo68/bigfatolly/rickmanfs007.jpg)
(http://www.radbmx.co.uk/archive/albums/oo68/bigfatolly/rickmanfs006.jpg)
(http://www.radbmx.co.uk/archive/albums/oo68/bigfatolly/rickmanfs001.jpg)
-
1993/4 SE FLOVAL FLYER CRUISER
Not one for the purists, but I chose the parts to complement the build. Mix of New School Retro, Mid School and Old School. Built as a 'rider' rather than the usual show pony fare... My first build for nearly 3 years :)
Frame: SE FLOVAL FLYER - 1993/4
Fork: PRE-FUJI SE LANDING GEAR
Wheels: SKYWAY GRAPHITE
Bars: JOHNNY CHOPPER
Stem: PROFILE
Crankset: PROFILE RETRO
Brakeset: SHIMANO DXR
Pedals: SKYWAY GRAPHITE
Headset: HOPE
Seat: ELINA LIGHTNING BOLT
Tyres: MITSUBISHI COMP 3
Padset: SE JJR RETRO 2007
Chain: IZUMI
Chainwheel: SUGINO
Grips: ODI 'STAY STRONG'
(http://www.radbmx.co.uk/archive/albums/g48/noahnhenrysdad/P1060935.jpg)
(http://www.radbmx.co.uk/archive/albums/g48/noahnhenrysdad/P1060953.jpg)
(http://www.radbmx.co.uk/archive/albums/g48/noahnhenrysdad/P1060949.jpg)
(http://www.radbmx.co.uk/archive/albums/g48/noahnhenrysdad/P1060955.jpg)
-
81 Robinson Expert F+F and Bars
Nos Elina
Nos Robinson stamped seat post
Nos Dc twin bolt seat clamp
Nos DC Mx 1000's with RH Lever
Nos Skyway pro pads
Nos Comp 3 tyres ( blue silver lable )
Nos Izumi chain
Nos Tange headlock
Mint Oakley .5's
Mint Suntour xc Compe pedals
Mint Redline Flight 43 chain ring
Mint Gen 1 Tuf neck
Original finish Pro class rims Black Nipples
Bulls eye hubs
(http://www.radbmx.co.uk/archive/albums/ss250/in2signs/RedRobinson015.jpg)
(http://www.radbmx.co.uk/archive/albums/ss250/in2signs/RedRobinson016.jpg)
(http://www.radbmx.co.uk/archive/albums/ss250/in2signs/RedRobinson005.jpg)
(http://www.radbmx.co.uk/archive/albums/ss250/in2signs/RedRobinson002.jpg)
More photo's here http://www.radbmx.co.uk/forum/index.php'topic=132025.0
Carl :daumenhoch:
-
Just built this as a bit of a 'rider' project. A mix of nos & originali parts. It's not a minter by any stretch of the imagination but it does go like sh%t off a shovel !
'86 GT Cruiser frame & forks
Powerlite Cruiser bars
A'ME Cam grips
GT stem
Dia Compe 890 brake/straight lever
Araya 7X rims laced to Suntour/ACS hubs
GT seat clamp
Haro Fusion 170mm OPC
Sugino spider/chainring
Shimano SX pedals
KMC chain
Suntour freewheel
(http://www.radbmx.co.uk/archive/albums/oo34/snapbacknarler/DSC_0681.jpg)
(http://www.radbmx.co.uk/archive/albums/oo34/snapbacknarler/DSC_0683.jpg)
(http://www.radbmx.co.uk/archive/albums/oo34/snapbacknarler/DSC_0686.jpg)
(http://www.radbmx.co.uk/archive/albums/oo34/snapbacknarler/DSC_0696.jpg)
-
For those who don't venture too much in the mid school section:
http://www.radbmx.co.uk/forum/index.php'topic=132627.0
BOSS Bad Boy XL 1993
(http://www.radbmx.co.uk/archive/albums/s192/2xchevron/BOSS/BOSS001.jpg)
(http://www.radbmx.co.uk/archive/albums/s192/2xchevron/BOSS/BOSS011.jpg)
(http://www.radbmx.co.uk/archive/albums/s192/2xchevron/BOSS/BOSS016.jpg)
(http://www.radbmx.co.uk/archive/albums/s192/2xchevron/BOSS/BOSS02.jpg)
BOSS Bad Boy XL 1993
F+F: BOSS 20.75" TT
Bars: BOSS
Stem: BOSS
Cranks: BOSS
Pedals: SR Speedtraps
Saddle: Italia Turbo "bio"
Whells: Mavic XX/ Suzue sealed
Tyres: Comp III
Brake: Dia Compe Bigdog et Tech 5
Seatpost: kinda Elf
Seatclamp: GT
Grips: Dyno
-
My Skyway TA Serial No. 000003 build
Skyway Race Bars, Nora Pro Grips, Cal Lite Pads
MX1000 brakes, Shimano Hubs, Pro Class type chrome rims
Elina seat, Pro Neck seat post, Tange seat clamp
Tange LP125 headset, Pro Neck stem
Profile Box Cranks, MKS Pedals, Takagi spider,
Sugino chain ring, Izumi chain, Skyway Pro Pads
(http://i1200.photobucket.com/albums/bb336/acceler8blue/045smallsize.jpg)
(http://i1200.photobucket.com/albums/bb336/acceler8blue/033smallsize.jpg)
(http://i1200.photobucket.com/albums/bb336/acceler8blue/038smallsize.jpg)
(http://i1200.photobucket.com/albums/bb336/acceler8blue/037smallsize.jpg)
-
Here's my entry 1983 GT Pro - Greg Hill Replica Build
Parts Rundown
GT Pro F&F
GT Pro Bars
Redline Brute Stem
Ame Grips
Tioga Headset
Pro Class Rims laced to Campagnolo Record Hubs
Fat and Thin Comp 3's
DC MX 900 Rear Calliper
Kool Stop Brakepads
DC Brake Lever
DC Brake Cable
KKT Lightnng Pedals with VDC Pedal Extenders
Profile Cranks with Profile Spider
PPP 43t Chainring
Suntour 16t Freewheel
Kashimax Seat
Tuf Neck Clamp
GT Post
Zap Pads
White Flo Panel
(http://www.radbmx.co.uk/archive/albums/gg52/Daletsunami/SNV32813.jpg)
(http://www.radbmx.co.uk/archive/albums/gg52/Daletsunami/SNV32812.jpg)
(http://www.radbmx.co.uk/archive/albums/gg52/Daletsunami/SNV32819.jpg)
(http://www.radbmx.co.uk/archive/albums/gg52/Daletsunami/GTGH.jpg)
-
here is my entry. my 1989 pk ripper hybrid rider. it has been to 4 ride outs now. i wanted to make a bike up using all my favorite bits from the 80's,90's,00's, and present day. thats why it has been labelled as the hybrid build. this may not be to everyones taste but i love it! :smitten:
its a 1989 pk ripper. yes you have read that right 1989!!!!!
custom powder coating by superbike dan. sparkles like nothing else in the sunshine!
original nos se racing pk ripper decal set. in silver and grey.
modified bottom bracket/cranks with sealed cartridge bearings. the gt cranks have had the anodise removed and have been polished. chainring is a polished (on both sides) profile imperial 36 tooth
1" to 1"1/8th conversion to except 1"1/8th sinz carbon race forks. and yes i have drilled them to except a u brake mount. headset is a mixture of tioga beartrap 2 1" & savage 1"1/8th
both the u brake mounts were machined to fit the profile of the frame and the forks.
dk stem has been polished and a gyro plate was made up on a cnc machine. the gyro is an odyssey gtx that has had all its seals and bearings removed and the main part polished. bottom gyro plate was modified to fit the alloy ripper frame.
dx pedals have been restored with new caps.
kink park pegs have been polished.
u brakes are polished odyssey evo 11
seat post is a haro fusion cromoly. re decalled
seat is an odyssey senior 2
the wheels are peregrine super pro. with a nos shimano mx30 16 tooth freewheel.
chain tensioners are polished bullsye modified to match the shape of the dropout curve. with shorter adjusting bolts.
tyres are haro multisurface 3 white walls.
levers are dia compe dirty harry.
bars are hoffman ramproom lovehandles. with polished lugs for the removable bar ends.
grips are odi longnecks with custom made cnc bar ends.
chain is stolen half link. that was a complete pig to fit.
stainless or titanium bolts have been fitted through out
please enjoy stu :daumenhoch:
(http://i1179.photobucket.com/albums/x398/rad-discostu/1989%20pk%20ripper/046.jpg)
(http://i1179.photobucket.com/albums/x398/rad-discostu/1989%20pk%20ripper/045.jpg)
(http://i1179.photobucket.com/albums/x398/rad-discostu/1989%20pk%20ripper/066.jpg)
(http://i1179.photobucket.com/albums/x398/rad-discostu/1989%20pk%20ripper/067.jpg)
-
my new rider finished (sort of)
87 Street Beat MKIII with unstamped LG's
DK freestyle bars
Fusion stem
Beartrap II headset
Prolite stealth powerbite cranks
Fishbone hubs with Sun rims
Lamello tyres
Nippon front brake AD990 rear with Tech 5 levers
(http://www.radbmx.co.uk/archive/albums/b339/robertbransby/S1051148.jpg)
(http://www.radbmx.co.uk/archive/albums/b339/robertbransby/S1051159.jpg)
(http://www.radbmx.co.uk/archive/albums/b339/robertbransby/S1051134.jpg)
(http://www.radbmx.co.uk/archive/albums/b339/robertbransby/S1051164.jpg)
-
Pretty close running between 3 bikes this month guys, make your vote count :daumenhoch:
-
Looks like it's a two horse race now.........keep voting peeps :daumenhoch:
-
dead heat at the moment...........make your vote count guys :daumenhoch:
-
Boss, JMC, Robbo or StreetBeat??????
fook knows!
-
whay has that Boss not got more votes? its beauty :smitten:
-
boss for sure
-
Thanks for all your votes guys . :daumenhoch: another close one .
A worthy winner that GT . Well done Dale :4_17_5:
Let's see what's lying around the house for next month ^"^
-
Well done Dale. That gt is tops! I'm well happy getting 8 votes. I must build up my next machine and have another go! :daumenhoch:
-
Great month again lads. Awesome top 3 :daumenhoch:
-
Great month again lads. Awesome top 3 :daumenhoch:
+1
Nice top 3 indeed - well done lads :daumenhoch:
-
nice one dale on winning fella :daumenhoch:
i'm over the moon with my second place and thanks to everyone who voted for my jmc :daumenhoch:
-
Congratulations Dale. A worthy winner and brilliant attention to detail. :daumenhoch:
Thanks to those who voted for my TA as well.
Julian
-
Well done Dale. That gt is tops! I'm well happy getting 8 votes. I must build up my next machine and have another go! :daumenhoch:
Yep, your mutant got my vote Stu but that GT was my second choice due to the effort put in to get it right - top month again lads :daumenhoch: