RADBMX.CO.UK

Technical & Reference Section => Tech and Restoration => Topic started by: TELLIS302000 on November 29, 2011, 08:32 PM

Title: Shinesiding
Post by: TELLIS302000 on November 29, 2011, 08:32 PM

Anyone on here is is VERY competent at shine siding rims?

 :daumenhoch:

Title: Re: Shinesiding
Post by: meticulous on November 29, 2011, 09:01 PM

it really is a DIY job if you have a bit of soapy water and some 400 wet n dry... ;)

Title: Re: Shinesiding
Post by: animal on November 29, 2011, 09:09 PM

I work through the grades down 2 2500 grit wet . Then a quick buff they r sorted  ;) Makes ur fingers hurt tho  :2funny:

Title: Re: Shinesiding
Post by: TELLIS302000 on November 29, 2011, 09:13 PM

Might give it a try then.

Just dont wanna knack em up like by going onto the inside of the rim!

Title: Re: Shinesiding
Post by: animal on November 29, 2011, 09:16 PM

Make sure u use a wooden block and fold the paper round it  ;) that way u don't slip over the edges  :daumenhoch: Loads of walm water with washing up liquid in it and a sponge 2 wipe off the muck

Title: Re: Shinesiding
Post by: TELLIS302000 on November 29, 2011, 09:20 PM

Quote from: ANIMAL on November 29, 2011, 09:16 PM

Make sure u use a wooden block and fold the paper round it  ;) that way u don't slip over the edges  :daumenhoch: Loads of walm water with washing up liquid in it and a sponge 2 wipe off the muck

:daumenhoch: